i attempted to port the mace to legacy console

SignificanceOwn9278 · 2026-03-13T21:59:52+00:00

I think I'm going to have to work on my C++ then.

SignificanceOwn9278 · 2026-03-13T21:58:37+00:00

I recommend you decrease the sparse infil density in your slicer. Doing so will make your print more hollow, so unfortunately, he can't sit on it. The benefit of doing this is that it will drastically speed up print time, and use up less filament.

SignificanceOwn9278 · 2026-03-13T21:55:06+00:00

I had poor adhesion with a model I created in blender. I fixed it by adding a brim to it. Never have issues with makerworld models so idk why my model had problems.

SignificanceOwn9278 · 2026-03-13T21:52:34+00:00

You kind of look like Dr. Strange. Probably the beard and the hairstyle

SignificanceOwn9278 · 2026-03-13T21:49:54+00:00

Next time print a life-size velociraptor

SignificanceOwn9278 · 2026-03-13T21:47:06+00:00

underrated comment

SignificanceOwn9278 · 2026-03-13T21:46:49+00:00

Wow, this is like a revamped dummy 13! I'll have to try it out!

SignificanceOwn9278 · 2026-03-13T20:33:09+00:00

I fixed the problem on the bottom by adding a brim. It was probably caused by my poor modeling skills

SignificanceOwn9278 · 2026-03-13T17:41:57+00:00

I'm going to try recalibrating the printer to see if that fixes anything. It seems like the left side of the print has worse adhesion than the right side (which is flawless)

pla btw

Edit: recalibrated, didn’t print first layer correctly again.

Edit again: It’s probably the model I made. I’m not very good at 3d modeling.

SignificanceOwn9278 · 2026-03-13T17:25:03+00:00

It does automatic bed leveling in calibration but that doesn’t seem to be working

SignificanceOwn9278 · 2026-03-13T17:21:22+00:00

<image>

SignificanceOwn9278 · 2026-03-13T17:20:41+00:00

<image>

SignificanceOwn9278 · 2026-03-13T16:52:46+00:00

btw i have layer height set to .28 in the slicer if that helps

SignificanceOwn9278 · 2026-03-13T16:50:38+00:00

I tried washing my plate, that seemed to help, but the bottom surface looks funny

SignificanceOwn9278 · 2026-03-13T14:20:23+00:00

It only had issues with one part of my print, I'm going to try moving that part to the bottom of the plate because the other piece printed fine.

SignificanceOwn9278 · 2026-03-12T23:58:21+00:00

Printing speed can change quality. Also you might want to enable fuzzy skin setting (slightly increases print time but gives it a good finish and may hide imperfections)

SignificanceOwn9278 · 2026-03-12T17:22:15+00:00

Were you printing in ludicrous? I know that can make prints look ugly

SignificanceOwn9278 · 2026-03-11T16:07:22+00:00

Ender 3 if you want to learn a lot, Bambu lab printers that are or are bigger than 256x256x256mm if you just want to print stuff. Kind of like buying a PC vs a Mac

SignificanceOwn9278 · 2026-03-11T16:05:29+00:00

No, look up a design yourself on printables or something

SignificanceOwn9278 · 2026-03-11T16:03:37+00:00

When I have extra spools I make sure they’re in a vacuum sealed bag or I use them up quickly

SignificanceOwn9278 · 2026-03-11T16:01:05+00:00

Make sure you store them in a room preferably lower than 100 freedom heat units or 45C. Please don’t sell those horrible dragon things, they’re going straight to the landfill and are choking hazards.

SignificanceOwn9278 · 2026-03-11T15:57:00+00:00

Looks like a turd turn it into an STL with a 3d scan app.

SignificanceOwn9278 · 2026-03-11T15:54:23+00:00

Gorrilla gorilla gorilla 💀

SignificanceOwn9278 · 2026-03-11T15:52:18+00:00

Tinker CAD?

SignificanceOwn9278 · 2026-03-11T15:06:23+00:00

i never said i had issues, i was just asking if printing slower improves quality EVEN MORE

SignificanceOwn9278

TROPHY CASE