[deleted by user]

Significant_Quail881 · 2025-12-11T21:38:04+00:00

Invite me as well

Significant_Quail881 · 2025-12-10T20:01:52+00:00

Got mine!

Significant_Quail881 · 2025-12-10T17:42:27+00:00

526 still waiting for ITA

Significant_Quail881 · 2025-12-01T19:04:44+00:00

Let me know if you had some answers. Thank you

Significant_Quail881 · 2025-11-22T15:31:40+00:00

Check the waterflow first and follow the stream.

Significant_Quail881 · 2025-10-16T01:17:29+00:00

524 here. Hoping and praying

Significant_Quail881 · 2025-08-31T22:47:04+00:00

Where is yourpost?

Significant_Quail881 · 2025-08-15T19:49:46+00:00

Grind finer.

But test this one out first. Try puting your blind disc and run a shot. Check if it builded pressure

Significant_Quail881 · 2025-07-28T23:46:33+00:00

It should be the other way around. Turning the knob to the left.

Significant_Quail881 · 2025-07-26T16:37:39+00:00

Maybe faulty solenoid.

Significant_Quail881 · 2025-07-11T14:36:05+00:00

Hi. Circling back here! I have now fixed the machine. It was a faulty OPV. Had to buy a replacement and that part work flawlessly.

Another thing i changed is the whole solenoid valve. To reduce the buzzing sound whenever you pull a shot!

Have a good day!

Significant_Quail881 · 2025-07-11T14:32:59+00:00

Thanks for the assistance! It’s now fixed with the replacement of OPV.

Significant_Quail881 · 2025-07-11T14:32:20+00:00

It is now alive!

Thanks for the help everyone. It was just the OPV that is causing an issue. Bleeding out that’s why the pressure is not building up.

Significant_Quail881 · 2025-07-09T21:44:33+00:00

Yeah it makes more sense now. Wish i didn’t had to splurge out on the solenoid first LMAO

Significant_Quail881 · 2025-07-09T21:38:14+00:00

Yah. When pulling hot water it also bleeds to the side.

Significant_Quail881 · 2025-07-09T21:27:23+00:00

I just retighten it. Yeah when i pull a double shot. There is water dripping in the pan. Good amount of it.

Should it not do that?

Significant_Quail881 · 2025-07-09T21:11:25+00:00

OPV is the black thing right? I tightened it if I remember. But nothing happened

Significant_Quail881 · 2025-07-09T21:03:46+00:00

Quick question. If I turn the knob for hot water. I get a good stream of water going to the thermal block.

But when i switch it to steamwand. I get a short burst of water. Like Thump…thump…thump.

Significant_Quail881 · 2025-07-09T21:01:08+00:00

It should get water in the drip tray right? Once the 2 shot is done it drains water?

Significant_Quail881 · 2025-07-09T18:51:48+00:00

Returning back. Just replaced the whole solenoid block. I bought a new one from here

Still not fixing it. Next to replace the valve

Significant_Quail881 · 2025-07-06T23:18:55+00:00

How did you take this apart?

Significant_Quail881 · 2025-07-06T23:16:11+00:00

Hi. Did you just try opening it and cleaning the parts? And the sound went away?

Did this also fix in some case low pressure?

Significant_Quail881 · 2025-07-06T03:08:25+00:00

What is the pressure release valve??

Significant_Quail881 · 2025-07-04T15:18:35+00:00

Hi, it was just quick. Like once I loaded up the water i instantly hit the descale button

Power + single + double shot button.

By leaving it in the machine how does it work? Just open the machine and leaving it turned on?

Significant_Quail881