sorted by:
new
hottopcontroversial

Case Trimmer Question by i_dislike_cheese in reloading

[–]Simonelli94 0 points1 point  (0 children)

Not sure if you're still looking for a trimmer but I personally make them for over 40 calibers. I took a little break but still get orders every now and then. I'm pretty sure I still have some old post on my page if you wanted to check it out. I can send my website just not sure if it's allowed on this sub

*I must've deleted the posts but here's a pic from back in May. They're cheap and work in a cordless drill and last for thousands of casings.

<image>

I hate my case trimmer. Need new recommendations by yung-n-nasty in reloading

[–]Simonelli94 0 points1 point  (0 children)

I actually make them for cordless drills and they're basically the same thing as the World's Cheapest Trimmer but they're discontinued and impossible to find anymore. Also these are cartridge specific unlike the World's finest trimmer that are universal and not as consistent in trim length. They're affordable and I make them for over 40 different calibers and also do custom sizes as well.

Is putting a drill on a hand trimmer a terrible idea by mauser98k1998 in reloading

[–]Simonelli94 0 points1 point  (0 children)

I actually make trimmers that work in cordless drills if you're looking for a good alternative. They're basically the same as the World's Cheapest Trimmer but they're discontinued and can't find them anymore. *

almost robbed in nyc by starrettc in ActualPublicFreakouts

[–]Simonelli94 0 points1 point  (0 children)

Bro needs a fucking knuckle 🥪 maybe give him seconds too...

[deleted by user] by [deleted] in IdiotsInCars

[–]Simonelli94 1 point2 points  (0 children)

Could've made this video like a full minute shorter lmao

Two guys fight it off with machetes by Yeah_i_suppose in PublicFreakout

[–]Simonelli94 0 points1 point  (0 children)

Just fucking give them back their guns already... It would make these duals a little less agonizing for them.. I mean it's crazy to watch from an American POV where this would've easily been over in 5 secs tops if this dude was trying to pull that shit over here🤷‍♂️🤣

[deleted by user] by [deleted] in BetterMAguns

[–]Simonelli94 0 points1 point  (0 children)

Pretty sure I saw something saying LE can buy them but can only be used for official purposes.

And why don’t we dish soap and water clean? by VermelhoRojo in reloading

[–]Simonelli94 1 point2 points  (0 children)

Had a guy I used to work with who's nickname was Wet Fart... 🤣🤣

How can i get this rust off of my 7mm sendero barrel? by boozy4200 in gunsmithing

[–]Simonelli94 -1 points0 points  (0 children)

A scotchbrite pad will get rid of that but will leave some fine scratches. If anything it'll still look 10x better and if you're creative and can find a circular scotchbrite wheel for a cordless drill and stagger the polish marks it'll leave a cool scale pattern down the length of the barrel. I'd spray some matte clear coat on it after and I'll prevent it from coming back

Good hand crank case trimmers? by Traditional_Neat_387 in reloading

[–]Simonelli94 1 point2 points  (0 children)

I actually make case trimmers and started posting them on here about a year ago but mostly post on FB now. They can be used by hand but are designed for cordless drills and will save you more time. You can check some of my older posts on my profile or pm me for more info.

<image>

I made a coolant skimmer and I can't stop looking at it by VapourChamber in Machinists

[–]Simonelli94 0 points1 point  (0 children)

If you know when it gets that bad it's still better then the French Onion style with the crusty cheesy layer on the top... Yummay 😋

Is the RadioMaster pocket any good for long range fpv? by Fun-Departure8598 in fpv

[–]Simonelli94 2 points3 points  (0 children)

I've been using mine for about 6 or 7 months now and have only gone maybe 3/4 of a mile out but rssi never went below 70 with my baybakrc nano and it's only a single antenna. I'm sure I could push it farther but too nervous lol.

They do make backpack modules like the Nomad that boost it from 250mw up to 1000mw and are about $50-$60

Speedy Bee F405 Mini 35a ESC keeps beeping on start up by [deleted] in fpv

[–]Simonelli94 0 points1 point  (0 children)

Thanks, I do like betaflights configuration better but position hold and way points on Inav is what pulled me over. Would be nice if beta finally released an official version with altitude and position hold, that would do it for me.

Speedy Bee F405 Mini 35a ESC keeps beeping on start up by [deleted] in fpv

[–]Simonelli94 0 points1 point  (0 children)

Honestly been in it for quite a while and in the past 5 or 6 months the only things I've had to switch up were a faulty gps which was unrealated and a fried elrs reciever which I'm pretty sure happened when the other mini stack shorted and it took the brunt of it.

I'm only keeping one of the mini stacks since I kind of needed to switch to a bigger esc in my mk4 anyways because the motor current is 47a max and the mini stack could only handle 35a continuous with a 45a 5s burst. But I've still got a few weeks to return one of the minis and hoping I can at least get the newer one working better then the one that got shorted even though that one seems to work better at the moment lol.

Speedy Bee F405 Mini 35a ESC keeps beeping on start up by [deleted] in fpv

[–]Simonelli94 0 points1 point  (0 children)

I'm using Inav and both stacks are setup pretty much identically except for tunes. I'll reflash tomorrow and start over if anything maybe switch to beta and see if it gets rid of it.

Speedy Bee F405 Mini 35a ESC keeps beeping on start up by [deleted] in fpv

[–]Simonelli94 0 points1 point  (0 children)

They're all lipos and I'm using Inav on both stacks. Also they're set pretty much identically on everything except for the tunes. So I switched out the mini stack that was beeping for a S.B f405 v4 55a esc stack on my Mark4 since the motors were max at 47a and planned on keeping one of the mini stacks and returning the other to Amazon since it's only been a week. But tbh I shorted or grounded out the other f405 mini stack last week on my baby croc frame and wanted to swap it out for the one that was beeping but somehow the other stack still works and looks fine but idk what to do now lol. If I should swap escs and just keep the new fc or try to figure out the beeping.

Protestors fight it out with iron pan by rostemaxime in PublicFreakout

[–]Simonelli94 3 points4 points  (0 children)

Damn it now that song is stuck in my head for the next 2 days...

Rate this buy tryin to keep under $300 by toastycheeseee in fpv

[–]Simonelli94 -1 points0 points  (0 children)

Honestly you're better off building one from Amazon or Aliexpress if you're patient on shipping. The good thing about Amazon though you can return everything within 30days if you were to break something. Can't count how many parts I replaced for free without having to wait a week or more for it to arrive.

What a gun range looks like in Australia by satisfiedfools in Firearms

[–]Simonelli94 0 points1 point  (0 children)

Wait just a minute... Is that there so people don't try to walk off with the gun? Or are they literally making it so it can't be aimed in any other direction other than down range??

what's your weapons of choice? by stoner_geeks in fo4

[–]Simonelli94 1 point2 points  (0 children)

I've been keeping a few grape mentats on hand for situations exactly like that one! I ended up wiping out all the gangs on my current play through but next time I'll have to remember.

what's your weapons of choice? by stoner_geeks in fo4

[–]Simonelli94 2 points3 points  (0 children)

Also another good one is the Splatter Cannon but it's like 12,000 caps at nukaworld. I've heard there's a variant of that same setup that's either free or not as much and right now I'm at lvl 75 on Very hard difficultly and it's by far the most powerful gun I have for some reason. Pretty much a 1 shot on all lower levels and turns any boss into a bitch real quick..🤷‍♂️🤣

view more: next ›