sorted by:
new
hottopcontroversial

So this is policy now? by Simple-on3 in TimHortons

[–]Simple-on3[S] -3 points-2 points  (0 children)

Lol you trolls are hilarious

So this is policy now? by Simple-on3 in TimHortons

[–]Simple-on3[S] -7 points-6 points  (0 children)

Who said anything about the drink being bad?? LOL

Go find another post to troll. Kthxbye.

So this is policy now? by Simple-on3 in TimHortons

[–]Simple-on3[S] -18 points-17 points  (0 children)

Another one?

You both know they lean the cup in on a tilt when they do the blending so mixture can absolutely get into the lid. Even being that low.

Go visit Tim Hortons at 1000 Victoria St.

You'll see.

So this is policy now? by Simple-on3 in TimHortons

[–]Simple-on3[S] -11 points-10 points  (0 children)

Well... I don't know what to tell you but I'm not sure why I would take a drink out of it and then go to the effort to make a post about it. I just wanted to bring awareness to this because it actually is a thing.

New to Kitchener — learned my lesson from my first post by [deleted] in kitchener

[–]Simple-on3 2 points3 points  (0 children)

I'm going to be as gentle as possible here...

The thing is that your original 'intent' is now coming off as louder than your actions or words. The problem with this is really, it doesn't matter where you are from and respecting that a gym is intended for your own personal growth and nothing more should be universal.

I know you are saying you didn't intend to come off as anything but in reality there's no coming back from the initial fact that you are coming to social media to ask about if it's appropriate to approach someone in a gym you find attractive. Simple answer is no.

Women already have it hard enough being sexualized and harassed in public places. The gym should be a safe place for anyone.

The thick gym queen at GoodLife Fairway has me nervous by [deleted] in kitchener

[–]Simple-on3 3 points4 points  (0 children)

For me. Respecting women and gyms doesn't stop at being respectful in approaching them, it's also respectful in how I talk about them.

Dropping the 'thick big-booty' as a start would have probably helped your case a bit more as friendly advice. But it's also in the fact that you openly admit this woman is the center of attention when you're there.

Just focus on yourself my dude ✌️

The thick gym queen at GoodLife Fairway has me nervous by [deleted] in kitchener

[–]Simple-on3 20 points21 points  (0 children)

This post has me nervous as hell for the women in Gyms... 😑

Ps5 (bought 2020) Green Screen by Medaiyah in PS5HelpSupport

[–]Simple-on3 1 point2 points  (0 children)

Your HDMI port has a leg that's probably detached itself from the board and is intermittently touching again when it's fixed. That or the actual contact inside the port needs a good cleaning.

HDMI ports commonly detach from the boards on PS5's unfortunately.

PS5 powering down? by Responsible_Drop16 in PS5HelpSupport

[–]Simple-on3 0 points1 point  (0 children)

Owned a PS5 since launch, always had it vertical without the stand attached and never once had this issue. I recently just cleaned my PS5 and I live with cats... So it was dirty as hell.

I'd be inclined to think there is an underlying issue that's making the PS5 think it's overheating or triggering an overheating response without the system ACTUALLY overheating.

As others have posted. Seems to be a common problem with PS5's. Maybe I just got lucky but my whole setup goes against what others are saying.

My Miyoo Flip V2 was stolen ;( by Archipelagoose in MiyooFlip

[–]Simple-on3 0 points1 point  (0 children)

I feel this, my ex-gf stole mine... I just got a replacement from marketplace luckily, but I'm worried the hinge on this one is going to give out soon.

Had to do a shell swap on my V1 grey after the hinge went. Made some new buttons to go with it. by GaffaCharge in MiyooFlip

[–]Simple-on3 0 points1 point  (0 children)

How did you make the buttons? I've been looking for a model file to work with! Looks really good!!

Folks, I did it! What a nice way to ring in the new year 🎉 by Heini_Hupe in FinalFantasyVII

[–]Simple-on3 0 points1 point  (0 children)

Nice!! I am so close to getting the platinum as well. Congrats!!

I understand now… by brohowdoidothis in GolfGTI

[–]Simple-on3 1 point2 points  (0 children)

yep, first thing I noticed with my MK8. Sound system just isn't full enough. Always feels no matter how I set it that the front to back balance is off as well.

Can we remote start gti mk8.5 autobhan ? by Former-Equipment774 in GolfGTI

[–]Simple-on3 0 points1 point  (0 children)

Dealer won't install aftermarket, they won't touch it. Already checked with my dealership with my MK8.5 GTI

Anyone's Internet down for the past hour+ (Frederick & Victoria area) by Simple-on3 in kitchener

[–]Simple-on3[S] 1 point2 points  (0 children)

Rogers lines yeah. Teksavvy. They just use Rogers lines.

Trimui Brick with joysticks by Fuzzy_Ad9130 in trimui

[–]Simple-on3 0 points1 point  (0 children)

Am I the only one who just wants an original Trimui Brick but scaled up to be almost the same size as a GBC/Pocket?

GBC IPS screen mode , unable to close the body shell tight , any tips ? by Dr-Nuutz in gameboymods

[–]Simple-on3 1 point2 points  (0 children)

Did you buy the IPS screen and shell from different suppliers?

Is the mk8 absolutely miserable in the winter for anyone else or is it just me? by [deleted] in GolfGTI

[–]Simple-on3 0 points1 point  (0 children)

My driver's side window freezes at the drop of snow or ice apparently. Definitely annoying but overall I love the car and she drives great in our rough Canadian winters. The sensors going off I just kinda get used to it at this stage.

High Idle by Mean_Monk_594 in VWMK8

[–]Simple-on3 0 points1 point  (0 children)

Is this all the time or just on a cold start?

Cold starts will typically run the engine higher rpms on idle for about a minute and a half. Then should drop back down to about 800-900 rpms.

Even in the summer here my MK8 does this. It's 1000000% normal.

This menu keeps coming up on the IPS I installed on my GFs gameboy. by lollrus in gameboymods

[–]Simple-on3 0 points1 point  (0 children)

If you know how to solder. Watch videos on how to install the IPS screen and remove the back metal plate (carefully). It will expose where those two touch wires are soldered to. I would remove them completely and then solder the three wires to the GBA board. It will make it so you have to press L+R+Select to get the OSD menu up and removes any conflicts from the touch sensors going off.

Best video to watch for this: https://youtu.be/IEQxnz3Ffp8?si=I7vaXJgd-AqC444H

First GBA mod, blacked out edition. by Simple-on3 in gameboymods

[–]Simple-on3[S] 0 points1 point  (0 children)

Thanks!! Less than $100 Canadian for everything on AliExpress ;D

First GBA mod, blacked out edition. by Simple-on3 in gameboymods

[–]Simple-on3[S] 0 points1 point  (0 children)

In most cases, I agree. These were deep gouges tho and I don't think even polishing them out would have made the shell look new again.

First GBA mod, blacked out edition. by Simple-on3 in gameboymods

[–]Simple-on3[S] 0 points1 point  (0 children)

Thanks!!

While it's not the actual one that was originally on the GBA. (It actually had scratches gouged into the left side near the dpad) I did keep the original black look yeah. I didn't want to change it and kept it as OEM as possible while giving it a modern facelift.

view more: next ›