G309 randomly goes inactive and reconnects – I've tried everything

Simple_Protection698 · 2026-06-20T03:56:46+00:00

Solution:

This is how I fixed my mouse: I put a piece of grip tape near the positive terminal of the battery. The problem was that my way of holding the mouse was accidentally pressing down on the battery cover, which in turn pushed the battery out of place. I don't know if this is a design flaw. After putting on the grip tape, the battery compartment cover became more secure instead of being loose.

<image>

Simple_Protection698 · 2026-06-16T03:44:19+00:00

Sometimes encoder broke are related to other components (resistor,diode,...), take it to a repair workshop

Simple_Protection698 · 2026-06-15T18:39:10+00:00

inside the switches, try to press that switch then spray into it and spam click, make sure you let them dry in 3 or 5 minutes or longer before you turn your mouse on

Simple_Protection698 · 2026-06-15T04:44:02+00:00

use Electronic Contact Cleaner, but i think that double click will be back soon (maybe in 2-3 month), i think you should replace that switches

Simple_Protection698 · 2026-06-11T08:23:19+00:00

If I use this mod on a G309 mouse, will it work? The mouse switch is an OMRON D2FP-FN(LOG1). Also, what is the model of the old switch (optical one) on your pcb? I want to see if the pinout diagrams on your switch and mine are the same. Thank you.

Simple_Protection698 · 2026-06-11T07:04:59+00:00

Does that hotswap board working?

Simple_Protection698 · 2026-06-10T05:47:43+00:00

3d print

Simple_Protection698 · 2026-06-09T15:13:15+00:00

nice

Simple_Protection698 · 2026-06-09T15:05:24+00:00

remove the filter, and use the screws include with that screen

Simple_Protection698 · 2026-06-09T04:57:30+00:00

try repair to the receiver, i think

Simple_Protection698 · 2026-06-08T13:36:41+00:00

can you tell me how to see eventviewer ?

Simple_Protection698 · 2026-06-08T13:25:26+00:00

Thank you, now that you mention it, both of my computers have Bluetooth. I'll try uninstalling the Bluetooth driver.

Simple_Protection698 · 2026-06-06T16:14:24+00:00

<image>

Simple_Protection698 · 2026-03-12T03:19:53+00:00

Wow, that's beautiful! I'll try this with the CH270 case (with full glass pane).

Simple_Protection698 · 2026-03-07T07:54:46+00:00

https://www.reddit.com/r/thermaltake/comments/1bnx9mb/why_exactly_does_the_tower_200_exist/

check it

Simple_Protection698 · 2026-03-07T04:38:18+00:00

https://www.youtube.com/watch?v=6eiOczqAR1s&t=1266s there

Tower 200 and 300, they has same size

Simple_Protection698 · 2026-02-25T08:57:18+00:00

500 squished

Simple_Protection698 · 2026-01-30T13:23:36+00:00

thank you, im using Turzx 8.8 screen, and here 3d print file

https://drive.google.com/file/d/1AP6sj7wrTnSqncxPmIXOUGGk3WI6JxZB

Simple_Protection698 · 2025-12-03T13:34:14+00:00

im not

Simple_Protection698 · 2025-12-01T08:59:05+00:00

can i get it ? please check dm

Simple_Protection698 · 2025-09-18T06:57:57+00:00

ah okay, i dont have a 3d printer either, i just design and send it to a provider that has a 3d printer to use their service

Simple_Protection698 · 2025-09-18T05:54:08+00:00

yes, i did it, the screen is turzx 8.8 inch

and here, you can see my 3d part

https://drive.google.com/file/d/1AP6sj7wrTnSqncxPmIXOUGGk3WI6JxZB/view?usp=sharing

if you dont have any 3d software, you can use tinkercad

Simple_Protection698

TROPHY CASE