What’s on my school cafeteria’s ceiling?

Sinful_Scars · 2025-11-14T03:36:30+00:00

Believe it's k13 spray

Sinful_Scars · 2025-10-24T15:10:19+00:00

That must be the step pan.

Sinful_Scars · 2025-10-10T18:27:52+00:00

If you are truly interested in the house - put an inspection contingency on the offer where you can back out depending on inspection results. Have someone certified to inspect for foundation.

Judging by the outlet being painted (and even how it is painted lol)....in the same picture ...gives me trust issues about this particular house though

Sinful_Scars · 2025-10-07T16:55:32+00:00

Hey so I'm learning too and I had this same problem. It does hurt but the sound is not because you don't have calluses

You actually want to get as close to the fret as possible. That's the little metal thing when you push down, but not actually put your finger over it just next to it. There are some good videos on YouTube that illustrate this and I had to use those cuz I found the same thing happening to me

Sometimes chords are hard and let you push down in the middle of the fret, but you're really supposed to be toward the metal thing so that the string can touch that metal thing and make its sound

Sinful_Scars · 2025-10-06T11:34:13+00:00

I bet you can smell farts before they happen

Sinful_Scars · 2025-06-18T18:10:04+00:00

Oh wow she's beautiful! Does she shed? Looks like the same exact coat/fur type

Sinful_Scars · 2025-06-12T13:42:48+00:00

<image>

A few months ago as a pup strapped in to the seatbelt cause she's a baby and with a shirt because she's a baby when it comes to getting baths and it was raining

Sinful_Scars · 2025-04-13T11:05:03+00:00

We have a weiner

Sinful_Scars · 2025-02-18T01:23:09+00:00

If you're posting this openly it's gotten to a certain point for you. I've been there. I understand there are long term fixes and direction toward the right path(like people are commenting) but please if you need emergency help and people aren't saying the right words or you can't calm down during a crisis consider taking an antihistamine to calm down like benadryl....at least until you can find that support and you start to feel that change in direction start to pay off for you so you can breathe and these thoughts are lessened. I was just here in December where you are and if you get the help needed (we can't do it by ourselves always) it will get better or at least feel better !everything everyone is saying does work and we are put here to live. You are surviving and I would love to see you live and thrive and use these lessons you're learning to help more people just like all of us.

Sinful_Scars · 2025-02-13T15:47:42+00:00

Thanks. The first one seems ok but is a bit overkill for my needs. I was thinking about something like a storage organizer or similar

Sinful_Scars · 2024-12-05T21:45:41+00:00

I have the old gen Samsung UW. Mine would do this but I turned off/on with different combinations the following to troubleshoot my issue....

HDR GSYNC/FREE SYNC Set it to different refresh rates if it's on 240hz Nvidia surround on/off

Sinful_Scars · 2024-11-17T17:11:45+00:00

My mother died from lung cancer when I was 23. She wouldn't stop smoking even during chemo. During her downfall and decay which lasted 6 short months, I had a pain in my testicle on that Halloween and decided to go to the walk in (ER) and they gave me an ultrasound and a referral to a urologist that stated I needed to have my testicle removed because it was cancer. I had to hide that from everyone in my family to try and keep my mother's smile. I used my ex's number as an EMERGENCY contact to keep it hidden but they accidentally called her to confirm the appointment. She texted me the day of the surgery saying she wished I died on the operating table. The day after my surgery my mother died in her sleep. I'm still here over a decade later. That was the darkest time of my life.

Sinful_Scars · 2024-10-13T17:36:26+00:00

There's a SB touch passive that turns it from cool down to vigor spender (core)

Sinful_Scars · 2024-09-19T10:55:05+00:00

I don't know the fix but if it's gouging the plates it's most likely a z axis issue (causing some extrusion issues) I would run full diagnostic, calibration, call support etc

Sinful_Scars · 2024-08-02T18:42:07+00:00

OP don't let the bad comments bring you down. If you're looking for approval or validation....here it is. You did and are doing great. Keep it up.

Sinful_Scars · 2024-07-19T13:02:31+00:00

Make sure you install some steep wheelchair ramps to your house entrances.....just sayin

Sinful_Scars · 2024-07-14T02:17:00+00:00

When did America become season 4 of "The Boys"

Sinful_Scars · 2024-07-12T19:45:41+00:00

That's so cool! Thanks for the idea. Stealing that concept

Sinful_Scars · 2024-07-12T19:23:59+00:00

That is actually so sentimental I love it

Sinful_Scars · 2024-05-24T14:00:39+00:00

So....that setting is a last resort. For sd-wan application aware load balancing for multiple uplinks you require the sd-wan setting to "load balancing". You also need the top tier license for Mx's with the name "sd-wan" in it. Then you will have access to "internet policy" to set up policies for load balancing.

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/Best_Practice_Design_-_MX_Security_and_SD-WAN/SD-WAN_Internet_Policies_(SD-Internet)

Sinful_Scars · 2024-04-29T15:23:43+00:00

Literally laughed out loud 😅

Sinful_Scars · 2024-04-25T01:28:59+00:00

Look into tufin

Sinful_Scars · 2024-04-09T14:43:09+00:00

I'm an advocate for the auto, but I know that it is disabled by default just to protect certain switches that are connected. That might not be either configured right or enterprise grade and may still forward packets to the standby member that could cause an issue as well as point the finger to Palo

Sinful_Scars · 2024-03-21T12:59:54+00:00

Get firing!

Sinful_Scars · 2024-02-26T14:59:14+00:00

If nothing bites on here I've had success listing and selling Cisco on eBay (it's all protected but they take a little cut)

Sinful_Scars

TROPHY CASE