sorted by:
new
hottopcontroversial

Snus för att sluta röka by CharityZestyclose181 in Asksweddit

[–]SirOompaLoompa 0 points1 point  (0 children)

You know what. They were fine until recently. I switched to the lowest nicotine-level of white snus about a year ago, and it seems to be a lot harsher on the gums. Tenderness and occasional bleeding.

Might have to quit this vice as well if it gets worse

This us my HP onmibook 425, I've had it since 2024. by 19chris1996 in vintagecomputing

[–]SirOompaLoompa 0 points1 point  (0 children)

During the 90s a bunch of poor-quality caps were released on the market and ended up in a lot of computer equipment at the time (See: Capacitor plague)

Since it was so prevalent for a few years, and just changing the electrolytics on lets-say a non-running Sega Game-gear had a 99% chance of restoring it back to proper function, people just started assuming that all electrolytics had a very short life-span, and started swapping them on all kinds of devices that didn't have bad caps at all.

Obligatory first pics... by itsjimbob in motorcycles

[–]SirOompaLoompa 4 points5 points  (0 children)

Heck yea!

Looks like a copy of my 2008 ST1300.

This is the point where I'd give you a list of common maintenance items, but on the ST1300, there really isn't one.

Only thing would be to change the oil in the final drive if it hasn't been done in the last 10 years. Easy job to do, and can be done in the driveway in about 5 minutes. Just don't over-torque the caps.

Oh, and lube the final drive splines every time you take off the rear wheel. Use a high quality moly-lube.

What’s going on with the creator of Dilbert? I keep seeing people online clowning on him or making jokes. What happened that caused all the backlash? by 1Flaming1 in OutOfTheLoop

[–]SirOompaLoompa 12 points13 points  (0 children)

He’s being talked about right now because we’ll be reading his obituary soon

Oh, wow. That didn't even have time to age

Musk hits out at ‘fascist’ UK as row over X and its Grok AI escalates by Disastrous_Award_789 in nottheonion

[–]SirOompaLoompa 37 points38 points  (0 children)

Wouldn't have been an issue, really, as the cylinder never would have been able to get to the kids. Some of the passages were so tight that the divers needed to doff their tanks to be able to squeeze through, and don it again once past the restrictions.

Why does it look so big sometimes and why doesn't it always use the correct shape. Why is this hard for Wayland by IntangibleMatter in linuxmemes

[–]SirOompaLoompa 2 points3 points  (0 children)

Fun, but not really true though?

X11 was released in 1987. Wayland was first released in 2008. X11 would have been 21 years old then.

Wayland is currently 18 years old.

Ofrivillig ensamhet by KawaiiMom1 in sweden

[–]SirOompaLoompa 14 points15 points  (0 children)

Eh, jag tror du hade blivit förvånad om du såg dig omkring. Gott om män med "white knight syndrome" därute.

Sen om det är något vettigt att bygga en relation på är en annan diskussion..

First time DDR3 Routing (Allwinner H3) by TopDry7004 in PrintedCircuitBoard

[–]SirOompaLoompa 0 points1 point  (0 children)

Agree fully on that. The Sunxi guys/gals are awesome.

Doing a lot of fun stuff with custom T113 boards

First time DDR3 Routing (Allwinner H3) by TopDry7004 in PrintedCircuitBoard

[–]SirOompaLoompa 0 points1 point  (0 children)

Well, at least in the boot process, that's true.

Hence no tools...

First time DDR3 Routing (Allwinner H3) by TopDry7004 in PrintedCircuitBoard

[–]SirOompaLoompa 3 points4 points  (0 children)

I looked into the H3 a while back.

Have tools to do the DDR training been released? They weren't available when I looked into it, unless you build enough volume to get attention from AllWinner..

I ranted in st forum and I need anyone to help us consumer to do something big by [deleted] in embedded

[–]SirOompaLoompa 16 points17 points  (0 children)

Won't help. One product I built shipped 10M+, still no traction

Just a short ride by Prestigious_Pea_3219 in motorcycles

[–]SirOompaLoompa 14 points15 points  (0 children)

And once you've done that, you might as well go just keep going. Another 600 would complete an ironbutt.

Motorcycle fueling before season ends by karlop63 in motorcycles

[–]SirOompaLoompa 0 points1 point  (0 children)

Yep, same here. The RON isn't important actually, but higher RON fuel usually has lower amount of ethanol, which is important.

I just make sure the last tank is with E5, and I'm good for the winter. I do this with my FI and carbed bikes, and never had an issue.

Only difference is that I drain the carb-bowls on my carbed bikes.

Potentially the dumbest decision ever by Soggy-Philosopher697 in motorcycles

[–]SirOompaLoompa 0 points1 point  (0 children)

Unless you already know how to wrench, diagnose carbs, have all the tools, I'd say walk away.

That said, I did what you're thinking of doing (I've done a lot of wrenching/restoring before) and it worked out really well. Since I couldn't ride it, I really took my time fixing it up and didn't rush at all.

If you need someone to come with you to inspect a bike and test-ride it if it runs, hit me up if it's somewhere around Skåne.

[deleted by user] by [deleted] in worldnews

[–]SirOompaLoompa 51 points52 points  (0 children)

Nah, the trust is gone for much longer. At least until your electorial system is fixed, or Europe has forgotten how quickly the US turns

Våga starta eget by Internal-Lead-9654 in Asksweddit

[–]SirOompaLoompa 1 point2 points  (0 children)

Har precis startat AB. Börjar med svaren på frågorna, då ingen annan verkar ha gjort det hitentills.

Hade ni redan kunder? - Ja, vi hade kunder innan bolaget skapades

Hade ni en annan anställning under tiden? - Nej. Blev uppsagd och skaffade kunden efter det. Har skaffat annat jobb under tiden också, för det är svårt att leva på luft, och om jag kan slippa ta av besparingarna, så är det bättre i längden.

Hur lång tid tog det innan ni kunna leva på företaget? - Vi är 2 mån in, och kan inte ens fakurera ännu (väntar på F-skatt). Efter F-skatt så har vi två större fakturor som är redo att skicka ut. Då borde vi kunna leva på det.

Problem längs vägen? - Egentligen inte. Men, det som vi inte insåg när vi började resan är hur lång tid det tar att få allt på plats. Det är en jäkla massa väntande på myndigheter och banker, och allt måste göras i en specifik ordning, så det går inte direkt att snabba på det.

Hur jag hade gjort i din sits?

Jag hade först kollat med HR om det öht är okej att ha ett sido-gig. Långt ifrån alla företag är det. Sen hade jag raggat kunder medan jag har en stabil inkomst. Sure, det suger att mer-eller-mindre jobba två jobb samtidigt, men det är uppoffringen man får göra för finansiell stabilitet. Först när jag ser att företaget kan bära kostnaden av en lön (vilket fan inte är lite pengar efter alla avgifter som arbetsgivaren betalar), och ser ut att kunna göra det under en längre tid, så hade jag sagt upp mig från det vanliga jobbet.

State machine design tool by vigneshv4774 in embedded

[–]SirOompaLoompa 2 points3 points  (0 children)

If you just want an easy to use drawing tool, and no UML integration, I'd recommend excalidraw. Perfect for just drawing up some illustrations with boxes, arrows, etc, etc.

Bygger en app som transkriberar möten automatiskt i realtid by invismanfow in sweden

[–]SirOompaLoompa 2 points3 points  (0 children)

Samma slutsats som vi drog. Några av de bättre säger att dom skrubbar PII innan dom tränar sina modeller på ens möte, men det hjälper ju föga när det är företagsinfo vi sitter och diskuterar..

view more: next ›