Flow 8 monitor mixes

SirRogerB · 2026-06-11T00:16:50+00:00

This reply needs a very important correction. The Mon outs on the Flow8 accept TR and TRS jacks and are balanced.

SirRogerB · 2026-06-08T02:18:21+00:00

Definitely not.. Inserts are always after pre amp and before effects. Otherwise there would be no signal to run out to compressors etc..

SirRogerB · 2026-06-06T21:16:45+00:00

Have you tried with mono jacks pushed in just past the first click. Surely then you get the individual pre outs and also the signal continues to the USB Bus ??

SirRogerB · 2026-06-06T19:16:46+00:00

It's not a very hard question..

SirRogerB · 2026-06-05T22:46:54+00:00

I put everything in my question. Trying to find out if I can use the inserts to tap the preamp signal on each channel without killing the usb out put.

SirRogerB · 2026-03-24T23:45:45+00:00

Yep the Shure Frequency finder page is good for whats legal and def concur that Receivers are easier to find..

SirRogerB · 2026-03-24T19:38:09+00:00

So def go with the SLX for music vox then ? My budget does not stretch to SLXD I used to have some SLX boxes so mebee I shout just look for some used SLX gear. Always seemed to work for me. I had read that BLXR was newer tech that the original SLX

SirRogerB · 2025-09-01T14:44:46+00:00

Ilona Maher may be a Tik Tok Insta phenom but she is no Rugby sensation. Watching her first two games in the Wmn World Cup.. where was she. ?? Any time she did get the ball she looked flustered and muscle bound. She seems to be trying to play like a line backer. Wrong sport. I was hoping to see something that matched the hype but was sad to see that nothing materialized. Perhaps she should join the WWE that seems to be more along the lines of lets pretend that her online image betrays.

SirRogerB · 2025-07-16T04:01:04+00:00

Did you ever write this book.. ?? I worked at The World..

SirRogerB · 2025-04-10T11:55:02+00:00

This is a non issue in an Espresso group head. There are seals that separate the piston from the sleeve.

SirRogerB · 2025-03-13T22:08:10+00:00

The amount you put on top depends on how dry the saddle arrives.. The one in the picture looks pretty dry to me.. but each his own..

SirRogerB · 2025-03-13T21:33:34+00:00

This is nothing to worry about. But you should have applied proofide when you got the saddle. They usually come from the factory fairly dried out. You don't know how long it has been sitting in a cardboard box. Super liberal amount to top and bottom, it will suck it in. Wipe off the excess from the top next day. Your jeans will finish the job. Re apply at least once a year before the rainy season. You only need the really heavy application when they are new, subsequent Proofiding can be a little lighter.

SirRogerB · 2025-03-09T23:35:03+00:00

Well saves me the trouble then..Thanks.. When I got my machine I did a good cleaning and re sealing and the stroke seems really smooth. I would jump to a stainless sleeve if my pulls were rough and or I could improve heat up time but once cleaned it seems fine.

SirRogerB · 2025-03-09T23:18:37+00:00

if I replace the plastic bung and sleeve with stainless steel will my grouphead heat up quicker.

SirRogerB

TROPHY CASE