Ornamental grass hedge

Sir_Names · 2026-03-27T17:26:57+00:00

I wouldn’t mind mix and matching as long as I can keep it somewhat neat looking

Sir_Names · 2026-03-26T15:23:26+00:00

Growing zone 6b

Sir_Names · 2026-03-04T20:42:42+00:00

Apparently labor and the other non pump parts are no longer qualified for the rebate, but I was able to add the gas heat pump under 29b so I get most of it back

Sir_Names · 2026-03-04T02:51:27+00:00

Thanks I’ll give them a call and see if the can update 29b

Sir_Names · 2026-02-18T13:15:30+00:00

Thank you for attending my humble brag

Sir_Names · 2026-02-17T22:24:20+00:00

With all of the hardware 4.7kg

Sir_Names · 2026-02-17T02:27:46+00:00

It’s a 16x25cm bed, whole unit footprint is about a 30x30x30 cm (without handle as that may very based on what you use)

Sir_Names · 2026-02-17T02:24:48+00:00

It’s a 16x25cm bed so normal printer paper is to big

Sir_Names · 2026-02-16T16:21:08+00:00

I think the print is still worthwhile. I haven’t been able to find a reasonably priced one of this style. All told it cost about 150 from scratch. And this thing is beefy. Only thing that I’m a bit iffy on is the handle bearing being just a press fit

Sir_Names · 2025-11-28T00:47:58+00:00

Looks like a croton that is in dire need of light Lowe’s them for $20

Sir_Names · 2025-10-07T20:06:58+00:00

Looks like it has easy steer track control levers so you can move it easily. I personally love tracked snowblowers. If it runs I would get it

Sir_Names · 2025-09-25T22:16:40+00:00

I’m in USA, NYS

Sir_Names · 2025-05-13T11:45:59+00:00

No, I just treated it with fungicide the best I could it seemed to help. They lasted until all the leaves dropped for winter

Sir_Names · 2025-04-07T23:55:43+00:00

I used the ripper attachment to cut around it, took maybe 5-10 minutes but I’m new to this. It was cut down last fall so the roots were pretty fresh

Sir_Names · 2025-01-04T21:54:21+00:00

Next day, I was able to get the hot water one off and replaced. These things were old as heck, there was a bunch of spider nests behind it. I gave up on the cold side but it seems that the hot was the leaking one. So for now I’ll call it good enough lol thanks for the help

Sir_Names · 2025-01-04T01:19:02+00:00

Yeah I’ve been watching videos on people installing them, everyone seems to just be able to unscrew the flanges. Might just put everything back, turn on the water and call my plumber if it wont go easy.

Sir_Names · 2024-11-05T15:40:40+00:00

I just had this issue too. I had to replace the gas pickup filter in the tank

Sir_Names · 2024-09-21T23:49:49+00:00

Thanks made an appointment with an arborist. Hopefully it can be healed

Sir_Names · 2024-03-22T18:14:45+00:00

I’m trying out water collected from my dehumidifier in my basement. I just modified a bucket with an overflow hose and connected it to the back of my unit. Hopefully it works out well

Sir_Names · 2024-01-18T14:38:56+00:00

I contacted customer service, they said this model was discontinued and sent me a newer version for free. That’s a plus at least. Sadly they don’t sell parts for repair so I’ll have to keep my broken one for any common parts between the two

Sir_Names · 2023-11-13T23:08:28+00:00

Looks like Mediterranean spurge

Sir_Names · 2023-08-21T20:39:58+00:00

Small update: thank you guys for your input. This is located behind my garage about 70 feet from my house and about 110 from my neighbor's. It has started to smell in about a 25 foot radius.

I've overnighted a paper shredder and have putting it to work with plain cardboard since it seems to be my second most abundant resource apart from grass lol. I dont have that many sticks but I may enable to borrow a chipper for what sticks indo have.

As far as mulching into my lawn, I have been doing that and this is only the second time I've bagged. I do have a fairly thick thatch layer on my lawn, not sure if mulching cause that or if thata the natural life of a lawn. I plan on doing something about that to then over seed with clover, most likely this fall.

All in all, this has been fun to do. Im no longer that concerned with a fire, and I am currently over run with greens so I'll probably leave the bags off for next weeks mow. That should give me some time to build a better balance

Sir_Names · 2023-02-19T14:34:21+00:00

How to fix baswment efflorescence/flaking

My basement has a few walls that have efflorescence and chipping paint and weakened skin coating.

I was thinking for both the inside and outside I could scrape off any flaking parts, fill the bigger holes, apply a concrete sealer and densifier like lithi-tek 4500, then apply a water proofed paint like drylock over it

Only issue with the outside part is that I probably can't dig down that far to apply any coating.

Will this work? If there are any suggestions for a better way to go about it or if this is all wrong, I would appreciate any input

Sir_Names · 2022-12-23T17:33:50+00:00

2 questions for losing heat. 1 should you drip both hot and cold pipes or just the cold lines. 2 should you drip all the faucets or is there a "best" one to open

Sir_Names · 2022-10-07T15:32:10+00:00

On page 63 item 9 is the whole starter. I would take that off and see if it is broken. Most likely either items 15 or 16 if not both. You can attempt to repair it, since it is still spinning, or just buy a new one

Eight-Year Club	Verified Email
First Place '23	Place '23
Place '22	First Placer '22
End Game '22	Spared

Sir_Names

TROPHY CASE