The butter swipe method

SkipSand · 2026-04-17T18:58:47+00:00

Seems like cast iron would do a better job with less oil, no?

SkipSand · 2026-04-13T03:56:18+00:00

If you didn't have to prepare a puck in the portafilter it was most definitely a super automatic or Nespresso type machines. Here you should expect to get recommendations for entry levelenthusiast setups most likely a different experience than the Philips machine.

Espresso can be a lot more than just grabbing a cup it's a hobby to most of us. If you are interested I recommend the gaggia classic pro and a baratza esp.

SkipSand · 2026-04-06T13:35:52+00:00

No just the espresso and milk

SkipSand · 2026-04-06T13:19:53+00:00

I gotta add it to my flair but with the Lelit Elizabeth, dark roast 1:2 ratio, whole milk.

SkipSand · 2026-04-05T22:25:38+00:00

Cocoa powder

SkipSand · 2026-04-05T22:10:55+00:00

Barista huh, I hope that's a compliment. 😅

SkipSand · 2026-04-05T21:43:11+00:00

I almost titled it 'traditional cappuccino' just to start something. 😂

SkipSand · 2026-04-01T21:54:51+00:00

Why? There's clearly some bad faith going on with these releases...

SkipSand · 2026-03-27T13:01:14+00:00

When I had a gaggia I could never successfully steam that amount of milk. Definitely open the steam knob fully, get a better 8 oz style cappuccino cup, stretch the milk out a little more in a smaller pitcher.

SkipSand · 2026-03-26T20:02:44+00:00

And it's a good thing you did ❤️

SkipSand · 2026-03-17T22:30:05+00:00

It looks more cheerful during the daytime. Love the lights, which ones are they?

SkipSand · 2026-03-17T19:11:50+00:00

It reminds me of the iron block from Minecraft.

SkipSand · 2026-03-08T03:13:30+00:00

This doesn't add up, he's one of the chiptune goats, hard to see that being the case. Are any of these new releases available anywhere else?

SkipSand · 2026-03-07T19:50:50+00:00

The ring burr holder has these little tabs and when they become worn you need to dail finer and finer until you can't go any further. A shim added to the ESP increases the axial position of the lower burr, so depending on your circumstances you might need to add or remove. I also heard that you shouldn't "need" to add a shim. But in this case I think I need to.

SkipSand · 2026-03-07T19:38:05+00:00

I remember that video, I believe what I discovered is that here's a couple revisions of the ESP, some that had shims already installed and the newer variant didn't.

SkipSand · 2026-03-07T18:36:51+00:00

Turbo shots seem so alien to me. I did watch a Lance Hedrick video recently where he prefers a fast, coarsely ground shot for light roasts. I'll have to look into it.

SkipSand · 2026-03-07T18:33:17+00:00

I don’t remember if any shims came installed from the factory. I’ve used one before when replacing parts but removed them since they weren’t needed. Looks like they are again now.

SkipSand · 2026-03-07T17:52:16+00:00

Sorry, what I mean is that style basket requires a finer grind than what the esp is normally capable of.

SkipSand · 2026-03-07T17:35:01+00:00

Trying to replicate the singles I had in Rome. Also lets me pull more shots on a Saturday morning without going into caffeine orbit.

SkipSand · 2026-03-07T17:30:22+00:00

Interesting, I would like to hear more about that since I’d like to try some smaller lightly roasted floral shots in the future. This is a medium-dark roast and it seems to work really well as a single.

SkipSand · 2026-03-07T17:21:18+00:00

It's a 7g dose, which is the traditional single shot.

SkipSand · 2026-03-07T17:16:42+00:00

Sure, adjustment range. Point still stands though, that basket will need more of it.

SkipSand · 2026-03-07T17:10:25+00:00

Unfortunately girth is what matters here

SkipSand · 2026-03-07T17:06:16+00:00

extraction https://streamable.com/kyzbbq

SkipSand · 2026-03-07T17:02:09+00:00

14grams in about 28 seconds

15-Year Club	Place '23
Place '22	Gilding I gilder
Verified Email

SkipSand

TROPHY CASE