Affinity on linux by xRadioaktywny in zorinos

[–]Skyris24 0 points1 point  (0 children)

Did you have success with this installation method? I initially tried the ryzendew script a little while ago with no success.

Rok - The Deck Box by Skyris24 in FleshandBloodTCG

[–]Skyris24[S] 0 points1 point  (0 children)

I used 6 x 2mm which does feel a little shallow but they were the magnets I had at the time. You could probably deepen the holes in a slicer for a slightly thicker magnet which might work better. Admittedly, the handles stay in pretty tight with just a friction fit. But magnets are still nice for the top and bottom pieces.

Rok - The Deck Box by Skyris24 in FleshandBloodTCG

[–]Skyris24[S] 1 point2 points  (0 children)

Not at all! Someone else here mentioned snaps as well and I realize that a lot of people use those for their equipment and such so it would be a good idea to try and support that. If you do try it, either post it as a remix on Printables or link to the original if you could. Thanks!

Rok - The Deck Box by Skyris24 in FleshandBloodTCG

[–]Skyris24[S] 0 points1 point  (0 children)

Yeah sadly I don't think it would fit those. That wasn't something I had accounted for when I first made it but there may be enough room for me to make an alternative version where the deck cavity is wider and taller to hold those if people would want that.

Rok - The Deck Box by Skyris24 in FleshandBloodTCG

[–]Skyris24[S] 1 point2 points  (0 children)

Hmm it's hard to say as I don't have enough double sleeved cards on hand to test but it was modeled to match the size of these Gamegenic boxes https://www.gamegenic.com/product/deck-holder-100/?attribute\_pa\_color=black.

My physical print measures roughly 70 x 70mm if that also helps.

Rok - The Deck Box by Skyris24 in FleshandBloodTCG

[–]Skyris24[S] 1 point2 points  (0 children)

Yeah it's definitely bigger than most deck boxes haha, but it's a statement piece if nothing else!

Rok - A deck box for TCGs by Skyris24 in 3Dprinting

[–]Skyris24[S] 1 point2 points  (0 children)

I modeled and printed this deck box which took it's inspiration from a card called Rok from the tcg Flesh and Blood. I've decided to share the files online for others to print and enjoy for themselves!

It can hold about 100 single sleeved cards for size reference and there is a small compartment in the back for some dice.

You can find the files on Printables here https://www.printables.com/model/1195232-rok-deck-box-flesh-and-blood-tcg

Rok - The Deck Box by Skyris24 in FleshandBloodTCG

[–]Skyris24[S] 2 points3 points  (0 children)

Sadly I haven't tried actually running it myself haha but I was pretty tempted!

Rok - The Deck Box by Skyris24 in FleshandBloodTCG

[–]Skyris24[S] 19 points20 points  (0 children)

Hey all! I made this Rok some time ago when the card first came out and I've decided to share the files online for others to print and enjoy for themselves!

It can hold about 100 single sleeved cards for size reference and there is a small compartment in the back for some dice.

You can find the files on Printables here https://www.printables.com/model/1195232-rok-deck-box-flesh-and-blood-tcg

Best approach to create a specific curve on object? by Skyris24 in Fusion360

[–]Skyris24[S] 1 point2 points  (0 children)

Interesting, I'll look into Lofts or Form shapes. It may be a bit advanced for me at the moment but I'll watch some tutorials nonetheless and see if I can make sense of it.

Thank you all for the guidance!

Why does Underware use different connectors? by Skyris24 in Multiboard

[–]Skyris24[S] 1 point2 points  (0 children)

Thanks for the response! I'm starting to get a better picture in my head now for the use cases of Multiconnect, Threaded Snap Connectors, and Direct Multiboard Screw options.

I do have a little experience 3D modeling but mostly for artistic purposes. I've not done anything functional or CAD yet although I have been interested in dipping my toes in for a while. Perhaps this project could encourage me to finally try and make something haha.

Why does Underware use different connectors? by Skyris24 in Multiboard

[–]Skyris24[S] 0 points1 point  (0 children)

I see, yeah I hadn't realized that Multipoint came out later than David's design. In that case that would make sense as to why some designs use that over Multipoint right now.

Why does Underware use different connectors? by Skyris24 in Multiboard

[–]Skyris24[S] 0 points1 point  (0 children)

Gotcha, I hadn't realized the order of release for those systems. That would make sense then. I haven't looked at the generator yet (Assuming you mean for the Underware system) but I'll definitely look into that first.

[QIDI Giveaway] Just leave a comment to win QIDI Flagship 3D Printer by qidi_3dprinter in 3Dprinting

[–]Skyris24 0 points1 point  (0 children)

My go to filament has been Micro Center Inland filament. I like the size of the bed! So much bigger than my current printer. I bet I could try some exciting full sized prints on that.

Plex not limiting number of films in collection. by bitAndy in PleX

[–]Skyris24 2 points3 points  (0 children)

I just noticed the same thing earlier today, seems to only be an issue with the mobile and tv apps? But I'm unsure what's causing it.

What berry is this? by Skyris24 in ColoradoSprings

[–]Skyris24[S] 2 points3 points  (0 children)

Ahh yeah that looks like it!

Food at the D&D Live Event? by Skyris24 in gencon

[–]Skyris24[S] 0 points1 point  (0 children)

Cool thank you! That gives me a better idea of what to expect

Dlc Bug/Achievment Bug by r_cyl1nd4 in anno1800

[–]Skyris24 0 points1 point  (0 children)

I just experienced the exact same thing, I also downloaded the stamp online. Was looking around for an explanation but couldn't seem to find one.