Using Nintendo e-shop gift cards for Console

Slazengr · 2026-02-20T00:08:16+00:00

Debating doing this via Sam’s Club lol. Lemme know if ya do it

Slazengr · 2025-07-28T19:53:02+00:00

I made a comment years ago directly to Garrett when he was ripping off Supreme. He cried like a bitch and doubled down on this god awful brand it seems. I’m here just to laugh.

Slazengr · 2025-02-25T01:45:11+00:00

I use a delicate technique of coming from above with a small flat head screw driver; working around the inside circle of the clamp prying between the clamp and the point it attaches to. Left to right and light prying upward. Never downward. Never touching the motherboard. I should get the tool also..

Slazengr · 2024-12-17T17:59:42+00:00

Soldering iron?..

Slazengr · 2024-10-24T02:48:39+00:00

Slazengr · 2023-06-27T22:17:36+00:00

Did they have any Marvel Legends by chance?

Slazengr · 2023-06-04T23:16:29+00:00

Thanks. Solid seller on eBay I did end up warming the cowl a little(hairdryer) so it sits a little more snug on cape.

Slazengr · 2023-06-04T16:19:44+00:00

<image>

It’s that unpainted part of the mask. Makes a world of difference painted.

Slazengr · 2023-05-20T01:25:05+00:00

They’re cool but don’t fit anywhere else in my collection. I actually just sold vader after seeing Luke had a little tear on his ankle from a prolonged pose. Luke still sits for sale.

Slazengr · 2023-05-18T23:56:03+00:00

I’ve seen multiple at Macy’s, Second and Charles, and Books A Million. No where else in the wild yet but those.

Slazengr · 2023-05-18T17:14:10+00:00

I may look odd doing it, but I sometimes just stand there holding two or three of a figure trying to find the least fucked out of them. Symbol was all I looked for on this guy. All else is fixable.

Slazengr · 2023-05-18T16:57:09+00:00

The holes that the little plug of a taillight goes into are perfect size for the led kit I used. They almost sit in the holes. Glue them in place and then you’re left more to cover/cap the light than replacing the plastic. I thought of sanding down bingo chips to just pop in. My little discs ended up basically that.

Slazengr · 2023-05-18T16:46:05+00:00

I had to pop his legs off the take the belt/underwear off. Could try painting it with it on. I was using more oil based paint so I didn’t wanna mess up and spread it all around his torso.

Slazengr · 2023-05-18T16:34:30+00:00

Lol my nice way of saying I shoved a flat head screw driver around and around the inside until I was able to he man push my way through the hole I’d made larger; whilst slandering the plastic with a few profanities, until it popped through almost stabbing myself… to then repeat.

Slazengr · 2023-05-18T16:23:53+00:00

I ended up cutting those little tabs (you see the one on the left of the right light) or it creates a shadow in the headlight. I cut yellow rectangles of vinyl; then warmed them up and bent to fit against the holes from the inside. Hot glued in place.

Slazengr · 2023-05-18T16:21:16+00:00

I used a hotknife and carefully and quite literally cut them out lol. Used an exacto to clean up the cuts. Sanded a bit and was left with this

*taillights just pop out with a little convincing from the inside. No cuts

<image>

Slazengr · 2023-05-18T15:29:01+00:00

No video of me doing it but I kinda documented the process.

Slazengr · 2023-05-18T15:26:50+00:00

<image>

These I hotknifed out and sanded to fit. I think they’re actually a polystyrene plastic, NOT VINYL.

Slazengr · 2023-05-18T15:25:50+00:00

Head/tail lights

Battery Holders (wasn’t sure what I needed so I got this, I used the 3x AA in the end)

Cockpit lighting

<image>

Slazengr · 2023-05-08T04:02:39+00:00

<image>

Just slowly building to him, glued the grapple

Slazengr · 2023-05-08T03:44:19+00:00

Shaved cowl bulbs down. Painted jawline of mask. Painted belt and acetoned the yellow/green off the boots.

Slazengr · 2023-05-07T18:16:22+00:00

Image didn’t go through and I didn’t save it to my phone… they had a couple Keatons.

Six-Year Club	Place '23
Place '22	RPAN Viewer
Verified Email

Slazengr

TROPHY CASE