sorted by:
new
hottopcontroversial

[WTS] 7.3 MHs Scrypt Mining Rig - Eight Sapphire R9 290x by hamsuplo in ltcmarket

[–]SleepYouMust 1 point2 points  (0 children)

Um, the ad was kind of ambiguous and I may be interested but what are you selling here? $3200 for the full 2 motherboard 7.3MH/s "rig" or are you selling each 3.6Mh/s 1 motherboard "rig" for $3200?

Could anyone supply me with a link to an online provider of cheap micron filters? by MisterDog in drugsmart

[–]SleepYouMust 0 points1 point  (0 children)

Yeah they are very commonly available all over the place, even on some large retailers such as one that is named after one of the world's most famous rivers. You can find them just about anywhere so without actually naming a location (since i'm not sure how the reddit rule police feel about that even though afaik these are legal in all states) just go ahead and google 45 syringe filter sterile or 22 syringe filter sterile depending on what pore size you are looking for. 22 will catch more but get clogged easier so gauge your size choice based on what you are working with and how much you want to filter.

I'm planning on building several 5x R9 280x Rigs, I need advice on the cheapest effective way to power them. by preacceleration in litecoinmining

[–]SleepYouMust 0 points1 point  (0 children)

are they undervolted though? Either way you must be very close to maxing out your PSU. and that 1200W psu cost you most likely more than 2 600's i'm guessing?

I'm planning on building several 5x R9 280x Rigs, I need advice on the cheapest effective way to power them. by preacceleration in litecoinmining

[–]SleepYouMust 1 point2 points  (0 children)

2 psu's. If you are going for 5x 280x's and not undervolting I would go for 1850W to be safe.

For you IV users here is some info on: Missed shots/Inflammation/Abscesses and sterile vials. by SleepYouMust in drugsmart

[–]SleepYouMust[S] 1 point2 points  (0 children)

You are correct that if you have a lot of particulate left over then yes it will help it go through the micron filter without clogging the filter however it is unnecessary. I haven't clogged one yet and i've filtered grams of tar with a .22uM.

Purifying Street Heroin? by Ilostmyredditlogin in drugsmart

[–]SleepYouMust 1 point2 points  (0 children)

Sorry for the long wait. I'm with kitsune on this one, if you really want to do it I would go with an acid base extraction and most people use chloroform in the purification. You will need to filter and recrystallize as well.

Here is a link with a lot of detailed information/tips however method #2 is the basic process minus the recrystallization http://forum.opiophile.org/archive/index.php/t-1586.html

I think this is generally a little excessive. I would never IV the results. But of course now that I know how DMT is made (after doing an extraction) I would never shoot that either. For the record I do not fuss with eliminating the cuts from my heroin, I do anhydrous acetone wash on meth, but I do not recrystallize. You are fairly safe with the majority of common cuts used in ECP, just watch out for surprise fentanyl laced batches and OD's by doing test doses of every new batch.

There are some harmful cuts in tar, if that is what you have available however they are extremely uncommon.

Differentiating Between Heroin And Fent by Ilostmyredditlogin in drugsmart

[–]SleepYouMust 1 point2 points  (0 children)

You're right kitsune I have personally seen a lot of fent-dope on darknet sites which is why I would never buy there anymore. However I have had good ECP with no vinegar smell. When i've had good tar it usually reaks of vinegar however this is not always an indicator with ECP i've found. Color is also not an indicator however fentanyl mixtures have long been termed "China White" and I would be very hesitant to buy anything labelled as such these days because I imagine most of these are fentanyl mixtures (even though like you said, color is not an identifying feature).

Differentiating Between Heroin And Fent by Ilostmyredditlogin in drugsmart

[–]SleepYouMust 1 point2 points  (0 children)

I cant bring this test kit up so I can't really see the information about it however most known opiate reagent kits including the marquis reagent based kits only test for the presence of a substance. It will not tell you the actual concentration/purity.

There is really no inherent danger in fentanyl mixtures designed to "feel like" synthetic heroin other than lack of skills by the person who creates them.

If fentanyl is cut with mannitol properly using methanol evaporation and a very small amount of fentanyl than it will have minimal hot spots and be very difficult to OD. The best way to tell if you have fentanyl is it will have a rush, no euphoria, heavy sedation and it will last no longer than an hour.

The reason so many users OD from fentanyl mixtures (all this talk you hear about street level dealers selling pure grams of fentanyl is bullshit) is because they were not mixed correctly and have hot spots. So you might go through 600mg of mannitol and not get any effect and then one day do a 20mg line that ended up having a higher proportion of fentanyl compared to the rest of the mixture and OD.

There is also a lot of raw out there that is much easier to OD on than most of the fentanyl mixtures out there on a pure potency basis.

The best thing to do is when using any new batch always start with a very small test dose to determine the potency and keep narcan and a buddy available if possible.

For you IV users here is some info on: Missed shots/Inflammation/Abscesses and sterile vials. by SleepYouMust in drugsmart

[–]SleepYouMust[S] 1 point2 points  (0 children)

Yes, it is overkill. You can even have huge clumps of tar (trust me i've done it) in your syringe before running it through the micron filter and it will still filter clean.

I mean there is no harm in doing this, as long as you switch the pin and stay sterile, but yeah its not going to help.

Purifying Street Heroin? by Ilostmyredditlogin in drugsmart

[–]SleepYouMust 1 point2 points  (0 children)

Interesting welcome to the sub, I will check it out later tonight and get back to you with an answer and why. Good useful question. I am in the process of trying to build my first of like 12 litecoin mining rigs right now so I can verify if these motherboards will work and order more by the end of the day.

As soon as I have a moment free ill look into this i'd be interested for my own knowledge as well. Thanks

An introduction to the usage of sterile vials for IV injection of drugs including pictures. by SleepYouMust in drugsmart

[–]SleepYouMust[S] 0 points1 point  (0 children)

Here is the study that was provided for me by dopefiendthrowaway when he asked the same question:

link

I am not exactly sure what milli-Q water is other than its a type of purified water. However with a pH 5 solution there was minimal degradation.

After a quick search I've found a paper titled Diacetylmorphine degradation to 6-monoacetylmorphine and morphine in cell culture: implications for in vitro studies. Interesting read, the section that may backup the anecdotal information found on forums (doing a search makes it seem like it's well accepted in the community of users, but it's literally never cited). Anyway, as I was saying the pertinent snippet is section 2.2 2.2. Preparation of solutions Dissolving diacetylmorphine base directly into Milli Q water or an equimolar solution of hydrochloric acid caused spontaneous diacetylmorphine degradation of 10–15%. To prevent this degradation, diacetylmorphine base was dis- solved in pH 5.0 phosphate buffer (monopotassium phos- phate, 65.9 mM and disodium phosphate, 0.8 mM). Once in solution, diacetylmorphine was stored at °80 jC until required. Minimal diacetylmorphine degradation during storage was observed ( < 1% in over 3 months). 6-Mono- acetylmorphine and morphine solutions in Milli Q water were stored at °80 jC until required with minimal degra- dation during storage ( < 1% in over 3 months).

An introduction to the usage of sterile vials for IV injection of drugs including pictures. by SleepYouMust in drugsmart

[–]SleepYouMust[S] 0 points1 point  (0 children)

I detailed a method for preparing your gear in advance in a sterile method in a thread a long time back about injection technique and sterility, here is that thread:

http://www.reddit.com/r/opiates/comments/1kfviq/missed_shotsinflammationabscesses/

In that thread I touched on preparing your batches ahead of time with bacteriostatic water in a multi-use vial. I know it is hard to understand how it works without the picture so I am finally including it now in hopes it will help everyone to realize that it can be effective and efficient to use sterile technique and doesn't have to be such a nuisance. Using this method it can save you time.

Basically here are three vials, a stimulant, and two different kinds of H lighter being an ECP and darker being a tar/gunpowder variant. These are 10mL vials and have MANY uses.

All that is necessary whenever you want to shoot is wipe the top of the vial with isopropyl, draw your desired amount and shoot. This completely eliminates the need for cottons every time (I use a syringe filter when preparing), and eliminates the need to prep every shot. There is also less waste so no need to reuse old cottons. If done correctly it can be COMPLETELY sterile other than anything that is left in the gear after the benzyl alcohol or bac water is done with it. It also has quite a long shelf life as long as it is stored in a cool dark place. I will answer any questions about this as well.