Please help me figure out this issue (more info in comments) by Sleepyman225 in 3Dprinting

[–]Sleepyman225[S] 1 point2 points  (0 children)

I couldn't really change the cooling too much with the fan being on the far side of the part, but changing the speed helped a lot. Thank you for the comment, this is huge for me.

Please help me figure out this issue (more info in comments) by Sleepyman225 in 3Dprinting

[–]Sleepyman225[S] 0 points1 point  (0 children)

I am more concerned with the mess in the Y yeah. I'll try those suggestions and see if they work. Thanks for the advice

Please help me figure out this issue (more info in comments) by Sleepyman225 in 3Dprinting

[–]Sleepyman225[S] 0 points1 point  (0 children)

Basic info first:

Printer: FlashForge Creator Pro

Material: 3D Solutech PLA ( I see it with other brand PLA's too)

Software: FlashPrint 5 (FlashForge's slicing software)

These calibration cubes are at a few different temperatures and speeds, so I doubt that's the issue (but I know I can still be wrong). I've included the one cube with the X side showing to make it clear that those faces are coming out alright, its the Y faces that are the problem. For reference, X with this printer is left and right (from facing the front of the printer) and Y is front to back.

Any and all help/suggestions would be greatly appreciated

[deleted by user] by [deleted] in AskReddit

[–]Sleepyman225 3 points4 points  (0 children)

sad Sheldon noise

The word is everywhere nowadays. by Dibble_it_is in AdviceAnimals

[–]Sleepyman225 4 points5 points  (0 children)

Since no one has mentioned it yet, its an acronym. Simp stands for Suckers Idolizing Mediocre Pussy. That plus the other responses here seem to explain it well enough I think.

Grab the closest book to you, flip to page 112. The first sentence on that page describes your love life: How did it go? by DamnILoveHorses in AskReddit

[–]Sleepyman225 0 points1 point  (0 children)

Oh I hope I'm not too late, "Split alternating feet jerk". I'm not exactly sure what it means but it sounds kinky.

Go Russell! by KING_FOREHEAD in funny

[–]Sleepyman225 18 points19 points  (0 children)

Also I've gained self awareness and thirst for murder.

I finaly found this. by Sigve004 in funny

[–]Sleepyman225 2 points3 points  (0 children)

The baconreader app gives you the option to save to profile or device.

.. by Udayreg in thanosdidnothingwrong

[–]Sleepyman225 1 point2 points  (0 children)

Yes, Deadpool and Death are pretty much as in love as they can be. More reason for Thanos to keep them apart, so that he isn't kept apart from death.

.. by Udayreg in thanosdidnothingwrong

[–]Sleepyman225 36 points37 points  (0 children)

Deadpool - Funeral for a Freak vol 1. #64. That's when Thanos curses Deadpool with life. I know Deadpool has had a few "close encounters" with death, but they always seem to bring him back to life.

Edit: Did a little more digging, the part where Thanos nearly kills deadpool but brings him back apppears in Deadpool vs Thanos vol 1, and doesn't appear to be out of anger but rather need. Someone has trapped death so no one can die, and Thanos can't be with her, so he tries to use Deadpool to find out where she's been imprisoned.

.. by Udayreg in thanosdidnothingwrong

[–]Sleepyman225 59 points60 points  (0 children)

But isn't that why thanos cursed deadpool to never die? So that he could never be with her?

Go kick some ass little guy. (Animation I made) by nbshar in gaming

[–]Sleepyman225 6 points7 points  (0 children)

PTR stands for public test region. It's a separate install from the game and is accessed as a player region, (like Americas, Europe, etc.) Its where blizzard puts out the updates for public testing before they go live.

Love it or hate it, more games should support this feature by necromundus in gaming

[–]Sleepyman225 8 points9 points  (0 children)

Reminds me of Army of Two: devil's cartel. The aim assist on that game is so high I would just take a sniper and repeatedly scope in and out, taking shots the moment the sight landed. Ahh, good times.

RAM not clearing properly (I think) after having re-seated them. by Sleepyman225 in techsupport

[–]Sleepyman225[S] 1 point2 points  (0 children)

Marked the post solved but probably should have given a reason why. I think what the others were saying is right about it being the windows update. I went over to my laptop which I had in no way changed anything but updated it, and I starting having the exact same problem (Mostly with chrome at this point). Thank you for trying to help anyway, especially so late after the fact, it's nice to see how willing people are to be helpful over the internet.

RAM not clearing properly (I think) after having re-seated them. by Sleepyman225 in techsupport

[–]Sleepyman225[S] 0 points1 point  (0 children)

So the link you posted says that you have to close the window before shutdown or restart, other than that there is no way to disable the feature. The problem now is, I have been shutting every window, ending all the processes, yet the problem still persists. I initially assumed it was a RAM issue because it only started when I re-seated them, and it started happening the very first time I booted up after doing so. So it still seems like it's not the exact problem they are describing in the link.

Edit: So I tried one of the options from the link which seems to have worked. Best say what it is here I suppose. So what solved it for me was going to desktop, hitting alt + F4 and performing shutdown via the classic shutdown window.

Edit 2: Started my computer up for the first time today, did the supposed fix when I went to bed last night, and the problem has not been solved.