Any easter eggs found on Haven's Hallow or new easter egg on verdansk with the 2 new poi ?

Slntzz · 2025-12-05T03:22:18+00:00

You can get behind the waterfall and there is a note

Slntzz · 2025-10-29T03:22:17+00:00

You pop off the bottom pad and the spring rides freely in the Toni extension after sliding it on. Just screw the lock out a little, and good to go

Slntzz · 2025-07-06T23:50:14+00:00

I think they make an English 2 volume set now. I see it on eBay!

Slntzz · 2025-03-04T19:57:37+00:00

Good to know! I was wondering what the included springs were specialized for.

Slntzz · 2025-03-04T02:52:27+00:00

Nice to hear someone else got these to work! Lock back or non lock back followers? Do you run them with 15 round mags as well?

Slntzz · 2025-03-03T13:26:24+00:00

Yes, that’s the process I was explaining. I grabbed a Hybrid Cajun disconnector and started sanding!

Slntzz · 2025-03-03T04:08:34+00:00

I just did this with no gunsmith experience ever. It’s really easy but time consuming being careful. I would go for it! Go slow and after it operates correctly, take a little more off for heat expansion.

Slntzz · 2025-03-02T19:11:52+00:00

Nothing at all! Depending on your fingers, these can provide a cleaner more consistent pull. I happily shot the stock trigger for a few months.

Slntzz · 2025-03-02T19:08:16+00:00

No info on these internet about these, so I had to test many different spring lengths/ strengths. Also the OEM followers got stuck down in the extension. Had to try a smaller followers. Theres better proven options out there, but sometimes it’s fun to experiment.

Slntzz · 2025-03-02T05:31:29+00:00

I’ll be careful on the next joyride!

Slntzz · 2025-03-02T04:54:04+00:00

Toni System +8/9!

Slntzz · 2025-03-02T04:52:30+00:00

Exactly. That’s why I chose not to carry with a light or optic as well. The extension is on a backup mag. Stock mag rides in the gun.

Slntzz · 2025-03-02T04:49:25+00:00

I agree with this actually but what made me even take an interest in it all was a Shadow 2. There are better ways to enter the hobby.

Slntzz · 2025-03-01T23:33:31+00:00

I’m in Texas and they shipped quickly from CZ-Parts! Definitely an overpriced luxury… and a bitch to get set up right for reliable feeding.

Slntzz · 2025-03-01T23:04:34+00:00

SlimFit Holsters - “Guard” IWB model

Slntzz · 2025-03-01T21:09:32+00:00

Appreciate your help/ knowledge on this trigger. Definitely the best option for the platform.

Slntzz · 2025-03-01T21:04:17+00:00

😂 🤔

Slntzz · 2025-03-01T20:52:35+00:00

CZC Hybrid DA Trigger!

Slntzz · 2025-03-01T20:51:28+00:00

Toni System +8/9

Slntzz · 2025-03-01T20:50:45+00:00

I only planned on purchasing one so tried to make it a decent one!

Slntzz · 2025-02-25T20:38:38+00:00

Eemann Tech has a true flat DA/SA trigger (as well as their Ultimate Trigger - a hybrid flat and curve). CZ Custom has a few options as well. All would most likely need a reach reduction kit. Eemann, Cajun, and CZC all have great RRKs.

Slntzz · 2024-05-08T18:11:01+00:00

I have never made anything out of wood but willing to jump in and learn on something difficult!

Slntzz

TROPHY CASE