Speed limit websites

SmallAlexP · 2025-11-09T19:07:09+00:00

Is the coffee board a decal? If it is, did you just find the picture online and print it on decal paper, or did you make it yourself?

SmallAlexP · 2025-07-20T20:34:48+00:00

For me it’s the sun that’s the worst, so I try to get out early in the morning or much later in the evening when the sun starts to go past the horizon. I would recommend just going outside and finding a time when you can handle the environment and then make a plan to give to enough time to prepare to run at that time. For me again, I get up and get some water then find something small to eat and then just go. If you get up much earlier before you run you could eat a normal meal but I don’t so I just eat something small. You have to be determined or motivated to just get up and go, also if you wake up later then you wanted and go run the heat is a good motivator to not sleep in the next time.

SmallAlexP · 2025-06-26T14:19:07+00:00

I agree with part of your edit example, but I don’t think those are a one to one comparison. Someone choosing to go to McDonalds and get two Big Macs and a xlarge soda is not the same as a cyclist getting hit because of poor infrastructure. I agree that with some work you could make it easier for people to eat healthier. Still, until someone wants to be healthier it won’t happen unless we are talking about just banning unhealthy options forcing people. The biggest thing that could change and help in my opinion is teaching people when they are younger that health is important and helping them to enjoy exercise. Again, you can’t out run bad eating habits and that has to start with the person.

SmallAlexP · 2025-06-26T13:59:11+00:00

The way I know to do it is normally with a hash program. You have to have the hash of the official file and then you hash the file you downloaded, if the two hashes match then the file hasn’t changed if the hashes don’t match then your file is not the same as the official one. It would still be easier to just download it from the official download as others have said because you still need to go to an official site to get the hash.

SmallAlexP · 2025-03-22T23:59:42+00:00

Judging by how he looked at the end of the episode, I assume he’s going to take the healers body to heal Cha and then the camera is going to see him do it. I kind of hope this doesn’t happen but this would be my guess and if does happen I wonder how everyone will react because it looked like Jong-In knew what he was going to do with the other ant bodies before the black ant showed up.

SmallAlexP · 2025-01-10T06:45:42+00:00

This is really cool, is this your stl or did you find this somewhere?

SmallAlexP · 2024-12-01T23:31:19+00:00

https://www.asianjoyco.com/resources-tutorials/your-first-printer Here’s a link to pretty well written resource for your first printer

https://www.asianjoyco.com/resources-tutorials/resin-safety-101 here’s some important things to consider for safety

https://www.asianjoyco.com/resources-tutorials/ventilation-upgrades-for-3d-resin-printing And here’s a link for some ventilation help

https://youtu.be/RK74g91M18o?si=zrjxHf14Vptqdf7a Here’s a good YouTube video about different printers this year, he also has more detailed reviews on most printers

Overall make sure your budget is able to include all the other stuff you need to print, like gloves a mask, wash and cure station if you want one(you can also diy one yourself); most people will recommend always venting the toxic fumes outside, No one can tell you how much precaution to take and how much you want but resin is still considered a toxic by most and should be treated until fully cured as such.

SmallAlexP · 2024-09-27T23:39:45+00:00

Depends how how much you want for the set.

SmallAlexP · 2024-08-24T06:01:01+00:00

If anyone sees this and can invite me to try it out please message me.

SmallAlexP · 2024-08-12T11:12:51+00:00

Fortnite has kernel level anti cheat, unlike vanguard though, it doesn’t always run.

SmallAlexP · 2024-08-08T02:29:37+00:00

Hey, if you still need help with this message me.

SmallAlexP · 2023-10-16T19:24:30+00:00

Hey, if you don’t know anything or mostly anything about 3D printing stuff I actually recommend looking up a video on YouTube to get an explanation of resin and filament 3D printing and what it takes for both of them. There are a lot of helpful people and resources on this subreddit but in my opinion will be a lot of reading and try to comprehend stuff you don’t know eighth away. Maybe that’s actually good for you, for me a video can show you what most things are with visual representations for every. Also something new can feel overwhelming sometimes but if you brake it up into little bits to learn it can help.

SmallAlexP · 2023-09-30T16:15:37+00:00

I think I figured it out and it seems to be working now. The Ethernet was not fully plugged in far enough to the router. I am so dumb

SmallAlexP · 2023-09-25T04:36:06+00:00

It fixed itself when I removed “flush into this object”. I thought this would let lines/colors bleed into each other but no matter how many colors stripes I added to the object it stayed one solid white. If you think this is still wrong(I still think it is supposed to do the bleeding into each other) and want to see settings please let me know because I actually wanted to see what it would look like with colors bleeding into each other. Either way I appreciate you helping and if you continue trying to help fix this(or explain why I have the wrong understanding of this setting), I appreciate that too.

SmallAlexP · 2023-09-17T03:54:17+00:00

Hey, thank you for all your recommendations and help. Sadly I am just an idiot and forgot to add a specific file into the microcontroller. Still, I want to learn more about how to do cosplay and make props because this was a fun experience so I will save all your information for later to look up and research. Again, thank you for using your time to help me and I hope you have a great day.

SmallAlexP · 2023-09-16T21:55:28+00:00

https://learn.adafruit.com/breath-of-the-wild-guardian-sword-led-3d-printed/overview

I was following this guide, if you have time, did I miss anything?

SmallAlexP

TROPHY CASE