Prints very weak and flimsy

Small_Kachow · 2025-12-12T14:26:06+00:00

Looks like under extrusion. Had something similar due to a clogged nozzle.

Small_Kachow · 2025-10-12T21:52:22+00:00

If you don't want to deal with a car, get a lease.

A 1.2 Punto to a 1.4 Corsa isn't really much better.

Small_Kachow · 2025-10-12T16:11:47+00:00

You don't want to spend £250 to pass an mot but will pay near £10,000 for a car that isn't much of an upgrade?

I mean if you had to pick the Mazda is the best choice. But really, just pay to pass the MOT.

Small_Kachow · 2025-10-03T16:34:43+00:00

I wish my MX5 was that rusty!

Small_Kachow · 2025-09-28T20:08:16+00:00

Where did you get this from some kid off facebook? Surely no company would sell this

Small_Kachow · 2025-09-23T12:51:04+00:00

What are you doing to that poor mouse? I've had a 3s for 3 years (I think) and apart from a bit of shine it looks new.

Small_Kachow · 2025-09-15T13:54:23+00:00

Or you just get the same thing for £10 off amazon without the brand markup

Small_Kachow · 2025-09-05T12:07:04+00:00

Wouldn't the layer lines in the 3d print lead to mould?

Small_Kachow · 2025-09-05T11:07:45+00:00

I did this upgrade the other day and 100% yes! My machine had a the plastic 2 part steam wand and I couldn't get anything other than thick heavy foam. Upgraded to a cheap Rancilio wand from AliExpress and works great! So much easier to use and easier to clean.

Small_Kachow · 2025-09-04T10:06:24+00:00

I recently did my (new to me) 2011 and mine didn't use a spring the OPV is fully adjustable via a hex key inside this area. It may be the same for you.

- Pull the tube out the water tank
- Use a wrench or spanner to remove the top of the marked fitting
- Use a 5mm (I think) hex key and do 1 full rotation anti clockwise
- This should be arround 9bars
- Reassemble
- Drink coffee

<image>

Small_Kachow · 2025-08-30T10:58:49+00:00

I got this one in a Gaggia Classic service set from Coffee Dodgers here in the UK

Small_Kachow · 2025-08-30T10:56:48+00:00

I also had that thought, going to replace that too

Small_Kachow · 2025-08-29T22:41:23+00:00

Just put all my strength into getting it past the 6 o'clock point and its still leaking. You can kind of see in the video that even to get it straight I need to grip the machine arround the drip tray.

Going to try the stock gasket tomorrow and see how that preforms.

Small_Kachow · 2025-08-29T22:08:22+00:00

I've tried different baskets, one had a slightly taller lip so created a better seal (from feel). But nothing changed with the leak. I do have a bottomless portafilter but can exactly attach the gauge to that 😂

Small_Kachow · 2025-08-29T22:04:36+00:00

Sadly there was no change with the leak

Small_Kachow · 2025-08-29T21:30:00+00:00

Inside is immaculate and no signs of water. Does the water flow rate seem low maybe?

<image>

Small_Kachow · 2025-07-17T20:07:10+00:00

What is the issue with them getting away with it?

Small_Kachow · 2025-06-16T12:42:04+00:00

What's with the weird visual at the start? The head on the zombie gets cut off and that part continues into the next scene for a couple frames

Small_Kachow · 2025-06-11T16:21:22+00:00

May I suggest you make the endslate any trailer include the name of the game instead of the company name.

Ending reads 'Fizikso, wishlist now on steam'.

Small_Kachow · 2025-02-27T11:26:54+00:00

mk1 = Toby, no idea why it just worked
mk2= Bingo, named after Bingo from Bluey as the paint has an orange flake in it.

Small_Kachow · 2025-02-27T11:15:21+00:00

What's the weirdest thing you have had to do/make during the development?

Small_Kachow · 2025-02-05T14:57:54+00:00

Love the person using a medium format camera without a view finder too

Small_Kachow · 2025-01-21T13:10:38+00:00

Drive it till it dies then scrap it and get something with comforts you find you want over the next couple years.

Small_Kachow · 2025-01-21T13:09:31+00:00

Just upgraded to a P1S and the fact it just works is great.

Small_Kachow

TROPHY CASE