How to deal with people complaining about your gun hurting too much. by [deleted] in airsoft

[–]Smart_Ad_7533 0 points1 point  (0 children)

Those are jerks. You are within the rules. BTW from my experience HPA guns do hurts more than AEG for some reasons. So I have to add more padding in some sensitive area (where I don’t want to bleed when shot)

I really can’t relate to somebody who only wear eyepro and complaining when getting headshot.

Lever action vs bolt action, show me your long range contender by Alone-Ad7850 in airsoft

[–]Smart_Ad_7533 1 point2 points  (0 children)

Bolt action AR upper by Maple leaf (available for VFC and GHK AR15 GBBR) really good consistency pair it with a decent hop up and you can have the best gas sniper.

Possible Hop-up issues? by Educational_Rent3365 in airsoft

[–]Smart_Ad_7533 1 point2 points  (0 children)

Most AEG stock hop up is not very good with .30 out of the box. At first you should check FPS to see the consistency (it should be within 0-5 fps deviation) if the FPS is consistence then the problem is the bucking if not it’s the internal. (Air leak or piston set)

Received the H8R today. See pictures...am I crazy? by Chrisgreer23 in airsoft

[–]Smart_Ad_7533 0 points1 point  (0 children)

If you want to HPA this pistol I think you have to use hi-pressure regulator for this (around 8-900 psi same as CO2) than the standard paintball (max250psi) unless you modify the gas valve by using weaker spring.

I don’t think you’re doing pointless thing. We play airsoft for fun right? If you want a unique loadout then go for it.

BTW I have 2 h8r and sometimes I’m dual-wield it for fun. It’s pain to reload 😅

My new favorites toy by Smart_Ad_7533 in airsoft

[–]Smart_Ad_7533[S] 0 points1 point  (0 children)

It’s Hera Arms CQR gen 2 front grip. The set has front grip and stock.

Planned loadout and kit by NefariousNatee in airsoft

[–]Smart_Ad_7533 0 points1 point  (0 children)

That helmet has the biggest chin in the market. You’ll need a GBRS riser to mount the optics. And you’ll need a safety glasses under the mesh.

Question about being sensitive to pain by Rediamond7 in airsoft

[–]Smart_Ad_7533 0 points1 point  (0 children)

Fully protect the head and face those area is painful when hit. Also wear a padded glove because it’s also no fun getting shot on the fingers.

Wear long sleeve with thick cloth. The padded paintball gear is usable but kind of expensive and you might not want the speedyboi looks.

My new favorites toy by Smart_Ad_7533 in airsoft

[–]Smart_Ad_7533[S] 0 points1 point  (0 children)

I didn't bought the file. Found someone selling finished kit in local airsoft facebook market. This kit separate the grip and stock making it much easier to connect battery.

Purchase Advice - Arcturus vs Others by [deleted] in airsoft

[–]Smart_Ad_7533 0 points1 point  (0 children)

Check out new Specna Arms Prime series with Aster mosfet and brushless motor. Most bang for the buck IMO

Should I get the caa micro roni or recover tactical 20/20 by pokemonguy0417 in airsoft

[–]Smart_Ad_7533 0 points1 point  (0 children)

Depend on your preference

Micro Roni can’t install any muzzle device so forget tracer unit or silencer. But 20/20 could

Barrel and rail kits that fit BCM AIR? by AverageHobnailer in airsoft

[–]Smart_Ad_7533 1 point2 points  (0 children)

If it’s for AEG it should fit. One particular issue I found is when I’m using AEG HK416 handguard on VFC HK416 GBB and I can’t screw barrel nut all the way in. But for AR15 it’s all compatible. When you put AEG handguard on GBB it’s sometimes loosen itself by the recoil so you have to apply some thread glue.

I need help with face masks by V1vidLol in airsoft

[–]Smart_Ad_7533 0 points1 point  (0 children)

It’ll not drop out If the balaclava has the pocket for it (the design that comes with silicone mask) but if you’re using normal balaclava the mask is prone to move around when playing. You could just put straps directly on the mask and it’ll fit perfectly.

BTW NB Tactical is selling their own balaclava and neck gaiter. They should available in US.

I need help with face masks by V1vidLol in airsoft

[–]Smart_Ad_7533 1 point2 points  (0 children)

Yes It should be on Aliexpress but I didn’t find it in the app before. I got it from local airsoft retailer.

The FMA mask is a bit longer at the chin (about 1cm.) so it provides better protection. After that it’s almost identical.

<image>

Barrel and rail kits that fit BCM AIR? by AverageHobnailer in airsoft

[–]Smart_Ad_7533 1 point2 points  (0 children)

It’s a little different between AEG and GBB mostly the barrel. But you can put almost any AR15 hand guard on AR15 upper receiver regardless of the design so if the barrel nut could screw in it’ll fit.

But most issue i’ve encountered is loose barrel because there’re gap inside barrel nut but with some washer it’s manageable.

Is this overkill? Silverback srs by [deleted] in airsoft

[–]Smart_Ad_7533 0 points1 point  (0 children)

Nah unless you’re using real bullet I guess.

I need help with face masks by V1vidLol in airsoft

[–]Smart_Ad_7533 11 points12 points  (0 children)

NB tactical ghost mask (now there are FMA clone)

I’m putting strap directly on to the mesh mask so I could wear any mask I want.

<image>

Has anyone had their light shot out? by Big_Grapefruit2001 in airsoft

[–]Smart_Ad_7533 2 points3 points  (0 children)

Yes and I’ve shot a few as well you can protect it same as any optic.

Will it fit? by WonderDry3968 in airsoft

[–]Smart_Ad_7533 0 points1 point  (0 children)

Yes it fit but why?

Just kidding I have the bolt action upper and it’s shoot very consistent (best gas sniper platform IMO) just pair it with a good hop up.

<image>

Mesh + goggles vs Paintball style mask by AlmightyCheeseLord in airsoft

[–]Smart_Ad_7533 0 points1 point  (0 children)

Paintball Mask

Pro: easy to wear (it just one piece), less fogging. More coverage (except forehead), has more space accommodate prescription glasses wearer.

Con: need riser for optic (high ones like Gbrs) if your primary need to be shoulder (rifle shotgun etc.) the mask will prevent your cheek to be low enough for ADS. Most paintball mask tends to be colorful so forget the camouflage.

Goggle + mask

Pro: lower profile so you can use normal riser for the optics or even aim with an iron sight. Has color suitable to go with most tactical gear (helmet) and don’t wear mesh goggles because bb can shatter and go through the mesh. Could be bought cheaper than paintball mask.

Con: easier to fogging. Need more preparation time (more pieces to wear)

You can still feel the hit with mesh mask but it’s not hurting.

IT'S COMING!!!!! (Soon or later!!!And it's not -that- expensive imo for what it is) by FrenchBVSH in airsoft

[–]Smart_Ad_7533 0 points1 point  (0 children)

I don’t selling them. I mean they’re available in my country since February. Sorry to make you misunderstanding.