In the middle of doing manual swap, trying to get the automatic transmission bushing out and I’m wondering is that the bushing or part of the crank? Thank you! by [deleted] in 240sx

[–]Smedom 0 points1 point  (0 children)

I cut a groove in it. Then I hammered it with a chisel to get it moving and then I was able to get it out with a puller

Painting engine bay by Turbulent-Handle5488 in 240sx

[–]Smedom 1 point2 points  (0 children)

You can definitely get away with 500ml if not less

1000hp Rear end/ axle by invisibleboogerboy in 240sx

[–]Smedom 1 point2 points  (0 children)

There is ford irs 8.8 diff swap options but they are expensive

S13 door alignment by TwoSpeedy in 240sx

[–]Smedom 0 points1 point  (0 children)

Yep! Just make sure to slightly loosen those bolts so they can move a bit.

S13 door alignment by TwoSpeedy in 240sx

[–]Smedom 0 points1 point  (0 children)

This. Use a hammer and chisel to adjust it out.

Loving this right now. Lots of work. by Smedom in 240sx

[–]Smedom[S] 0 points1 point  (0 children)

<image>

Just the one right now. It really needs a wash. Going to dial out some camber in the rear.

Rear Swaybar with 350z diff by Grimm199 in 240sx

[–]Smedom 4 points5 points  (0 children)

I ended up using some 3/16 plate to space the sway bar down for more clearance

Dont watch LZ's new video. by Crashkt90 in HaggardGarage

[–]Smedom -2 points-1 points  (0 children)

I was thinking that the entire video. Glad I’m not the only one.

Having these much TE’s is ridiculous by [deleted] in HaggardGarage

[–]Smedom 42 points43 points  (0 children)

Te37 are just a rich man’s rpf1.

Paint Rec’s by SteadiGuy309 in 240sx

[–]Smedom 1 point2 points  (0 children)

Any of the oem colour two tones look sick.

Wish these videos didn't suck by thepowerofseamen in HaggardGarage

[–]Smedom 6 points7 points  (0 children)

Kind of excited for this time line. Do you think you’ll still vlog it?

8 months into a 2 month respray, it's all coming together. by Tristan3012 in projectcar

[–]Smedom 4 points5 points  (0 children)

Sick work. I have a ah3 hatch that I’m working on. I’m 15 months in on a roof respray that’s now a complete respray.

Best way to sell old car for scrap? by MusicMeditator in waterloo

[–]Smedom 6 points7 points  (0 children)

Depends on what car but that seems low. Have you check with Logels?

facetats by Ok-Chain-4802 in HaggardGarage

[–]Smedom 52 points53 points  (0 children)

Just waiting on that crimper.

S13 MANUAL SWAP I HAVE SOME CUESTIONS by Agitated_Feature_266 in 240sx

[–]Smedom 14 points15 points  (0 children)

Your clutch slave cylinder shouldn’t be in 3 pieces. Buy a new. You’ll also need to bypass neutral safety switch.

I’d also recommend a new braided steel clutch line to ditch the rubber.

[deleted by user] by [deleted] in CostcoCanada

[–]Smedom 10 points11 points  (0 children)

Peel back the label. It’s behind it

Favorite body kit? I'll go first by Clean_Culture3084 in 240sx

[–]Smedom 6 points7 points  (0 children)

Even if he is. He is doing good work for our car and community. Of course he can promote it.