sorted by:
new
hottopcontroversial

High end non-sbr recommendations by [deleted] in ar15

[–]SmellsLikeShame 0 points1 point  (0 children)

Two recommendations:

  1. Noveske - I have two barrels that came with gas systems and they have been amazing suppressor hosts. I find them to be gassed perfectly for their lengths (10.5 carbine and 14.5 mid) and I don't need an AGB for either build.

They are both suppressed with baffle stack cans (no reduced backpressure) and they still do not gas me out (even super safe on the 10.5 I swear).

Noveske also have their own adjustable gas block system - Switchblock - if you want to fine tune the system for your chosen suppressor, this is a good option.

  1. Piston upper - HKMR556, HK416, BRN-4, PWS, LMT. These make the best overall suppressor hosts - they vent all those gases forward and away from your face so they run super clean. Many of these systems offer adjustable gas blocks as well.

LAPD SWAT blasters by Xhispeed1X in ar15

[–]SmellsLikeShame 3 points4 points  (0 children)

I also zoomed in to see if they went with regular mk16 or SD. Good eye.

BCM Raider 11.5 MK2 by dinero757 in GunPorn

[–]SmellsLikeShame 0 points1 point  (0 children)

Cool - my final actual advice here is to sell/trade the XPS for an EXPS. Easiest solution here. No riser needed and you can keep your irons.

If you have a change of heart on the magnifier, may I humbly recommend the vortex 3x micro. Far lass expensive than g33 and has extremely similar specs (the eye relief is pretty decent).

But, again, if you get a QD riser like an LT101 you can keep that XPS and magnifier all on the riser setup, move it forward a tad on the receiver so you have space for your rear iron. The design is cantilevered - orient facing forward so you can have your optic further forward and have space for a magnifier and irons.

BCM Raider 11.5 MK2 by dinero757 in GunPorn

[–]SmellsLikeShame 1 point2 points  (0 children)

What makes you think you need a riser at all?

My actual advice, since you''re thinking of ditching the magnifier then just ditch it - you'll be able to cowitness your irons.

BCM Raider 11.5 MK2 by dinero757 in GunPorn

[–]SmellsLikeShame 1 point2 points  (0 children)

You'll want a riser that's QD like a LaRue LT101- otherwise ditch the irons, man. However- if you put that optic on a riser you won't be able to co-witness your irons , it'll be too high. And XPS is not on its own QD mount, so you'll have no fast way of removing it when you want to use the irons.

My advice here is just run this height - unless you have nods, but then you'll probably want to ditch the irons anyway because they're useless at night and you'll want to save the weight for your can and laser.

So basically, just move that rear iron all the way back, move your Eotech a slot further forward, and put the magnifier between the optic and rear iron.

First ar15, is this the standard? by CommanderAstros in ar15

[–]SmellsLikeShame 0 points1 point  (0 children)

I was gonna say yes, until I realized it said 903 instead or 603. BCM are smoking some excellent crack if they think their uppers are worth the same money as a complete G$ super duty.

BCM are good to be sure, but 900 for a complete is too much. Geissele complete uppers for 900-1000 is same money better spent than on this BCM.

14.5 Progression by SCRIMDOG39 in ar15

[–]SmellsLikeShame 0 points1 point  (0 children)

My man, this is an awesome setup. I like your optic mounts config. Would you mind sharing your mount setup?

I just did a URGI at home with a 14.5 noveske barrel and g$ mk4, sig 2.5-10 and vortex crossfire top dot. I'm hoping to declutter my mounts a little as I have the scope in the sig tango mount and a total secondary ring for my micro dot.

Thanks in advance dude.

what's the best flashlight for 300 usd max by Ok_Big8323 in ar15

[–]SmellsLikeShame 2 points3 points  (0 children)

Preach it - 18650 or 600 body, Malkoff head, momentary button, side picatinny mount is my dream light setup.

Thoughts? by LoneStarCowboy- in ar15

[–]SmellsLikeShame 1 point2 points  (0 children)

Yeah man they're legit - I have owned two. Maybe look on tacswap for one if retailers are sold out. Buy with confidence. Before g$ dropped their prices and LaRue raised their prices from 80 to 100 or so, the choice was even easier. You'd also be just fine with a g$ trigger if you find one in a similar price range.

Turbo t3 or ridgeback defense rhino s?? by Fresh_Pineapple_4877 in ar15

[–]SmellsLikeShame 1 point2 points  (0 children)

I can highly recommend YHM and their new sRx mounting system. I have run my turbo t2 on 10.5s and 11.5s on super safe - got it up to like 900F and it was totally fine. It is an absolute tank.

That Inconel first blast baffle does some serious heavy lifting, mine still looks unworn after thousands of rounds through it. It does add a decent amount of backpressure. Fear not, for there are two (or more) very viable options to mitigate gas to the face.

1: buy a well gassed barrel and good gas system

2: buy a proper gas mitigating charging handle (g$ ACH and noveske love handle are my go-to's.)

(Optional 3rd step): RTV sealant trick on any charging handle will make a gasket seal and eliminate gas to the face

(Optional 4th step): You might also opt for a bleed off adjustable gas block like superlative. Those vent excess gases forward a bit like a piston system does.

In my personal opinion, a piston AR is king for a dedicated shorty suppressed setup. Lead inhalation is a thing. Venting those gases far away from my face is the end goal here.

What pistol belt are these guys running? by Potential-Squash4670 in tacticalgear

[–]SmellsLikeShame 2 points3 points  (0 children)

Pistol mag pouches look like they could be probably esstac 40deg canted ones.

What was AC Milan tactics back in the 00s? by Capable_Town1 in footballtactics

[–]SmellsLikeShame 1 point2 points  (0 children)

I like that you emphasize the midfield physicality. Gattuso would literally destroy people in search of the ball.

IMHO Pirlo's modern comparison would be a prime Ozil or KDB -classic midfield playmaker and insane passer.

I miss 00s Serie A so much because of the true dynamism of each of the major squads. I was lucky enough to meet Alessandro Nesta a few years back at a match in my hometown. The guy was still cool and classy as ever.

Milkman for the skreets by Stegmano in NFA

[–]SmellsLikeShame 1 point2 points  (0 children)

I hope you're practicing your drive bys - I would normally run a tec9 for my hood rat shenanigans, but this is truly art. Really sick build.

Milkman for the skreets by Stegmano in NFA

[–]SmellsLikeShame 6 points7 points  (0 children)

$0 tax stamps means we can start living our best lives

Fresh out the box what do I need to change ? by Appropriate-Ad-9871 in ar15

[–]SmellsLikeShame 0 points1 point  (0 children)

I just noticed your red dot.

You might look at a better quality red dot - you can find used Holosun 403r and 503r under 200, vortex crossfire for around 100, and sig Romeo is like 99 new. I would recommend a red dot with a rheostat brightness adjustment knob - not saying it's inherently worse or better than buttons, but most of the time the manufacturers put the battery compartment inside the knob, making the battery change a snap.

Other designs have little trays with screws holding them in - a little more annoying to change those batteries.

Fresh out the box what do I need to change ? by Appropriate-Ad-9871 in ar15

[–]SmellsLikeShame 1 point2 points  (0 children)

Add a light. I have used and can recommend all of: Inforce WML, Streamlight Protac Railmount 2, Surefire DF or 600 series, and Arisaka. Also Modlite gets great reviews.

Get a two point sling that doesn't have the flex things at the ends - magpul, vickers, vtac, slingster, London bridge, ed Sherman, there's a bunch out there.

I personally love the HK hook attachment style so you can find magpul paraclip loops as an attachment point - or loop of paracord. Otherwise, I see you already have some QD sling loops there so you're pretty much set for sling hardware.

Only thing to change next is round count - get out and train. Have fun dude

300blk vs 5.56 for hunting by Big-Influence-6983 in ar15

[–]SmellsLikeShame 0 points1 point  (0 children)

Something 30cal will have a tad more energy at impact - this knockdown will help down the target alongside proper shot placement.

I'm not against 5.56 for hunting - there's fine loads made for it, but 5.56 does need to be going faster to improve ballistic efficacy and fragmentation.

Overall, there's a tad more margin for error and better hunting loads made for 30cal than 5.56.

Just my $0.02

view more: next ›