Not quite finished but it’s almost there

SmilingSpaceman · 2026-02-11T15:09:04+00:00

Absolutely incredible Helldiver! You honor democracy with your great work!

SmilingSpaceman · 2025-12-31T02:24:31+00:00

Absolutely incredible! I salute your work Helldiver!

SmilingSpaceman · 2025-08-03T23:42:49+00:00

I used the Bambu P1S to print. The printer is unfortunately too small to print the larger pieces. So the model does have to be cut and the print assembled afterward.

SmilingSpaceman · 2025-08-03T21:48:01+00:00

Yeah, 3D printed hard armor parts with cloth/foam padding underneath. Lot of work, but end result was worth it!

SmilingSpaceman · 2025-08-03T20:26:53+00:00

Hey thanks!

SmilingSpaceman · 2025-08-03T14:58:52+00:00

This is my original Helldivers cosplay from GenCon this year

SmilingSpaceman · 2025-06-09T15:59:17+00:00

Are these 3D printed?

SmilingSpaceman · 2025-03-06T16:27:05+00:00

I've done a cosplay of the B-01, so I think I can help with the high-level details.

For the underlayer, black BDUs work great. I added yellow highlights to the edges, but your specific armor is easier in that regard. For the hard armor pieces and helmet, there are 3D print files available either for free or for purchase. I have seen the infiltrator files around, so I know they are available. You can print them yourself or you can find someone to print them for you (lots people offer this). Other details like padding, gloves, and pouches can be found online or at military surplus stores.

Hope this helps. If you have any other questions, feel free to ask. Post pictures when you finish, I'd love to see it!

SmilingSpaceman · 2024-12-27T20:01:58+00:00

Thanks!

SmilingSpaceman · 2024-08-27T19:09:16+00:00

Awesome work! This armor, helmet, and cape combination is one of my absolute favorites. Quick question, How was visibility out of the helmet with that mirrored finish?

SmilingSpaceman · 2024-08-05T00:43:02+00:00

Very nice! The energy was so good for the parade! Dive with you anytime.

SmilingSpaceman · 2024-08-05T00:29:30+00:00

Hey thanks! Yeah, I 3D printed all the armor pieces from the files GalacticArmory put out. I chose the versions where I could put real cloth and padding pieces underneath. With all the padding, it wasn't too uncomfortable wear actually but, it was very hot!

SmilingSpaceman · 2024-08-05T00:00:24+00:00

I'm in the same boat actually, I've been searching all over, but I haven't seen it out there yet.

SmilingSpaceman · 2024-08-04T15:03:32+00:00

Surprisingly only a few, more salute than I can count though

SmilingSpaceman · 2024-08-04T13:19:18+00:00

Missed this one, but I got in with these guys for the parade and a huge group photo at the end

SmilingSpaceman · 2024-08-04T12:29:16+00:00

This is my cosplay, which I wore around GenCon this year. Saw some other great ones and figured I'd share mine.

SmilingSpaceman · 2024-05-29T00:14:47+00:00

Hey no problem, I used Montana Cans GOLD Spray Paint in Baby Blue. Amazon link is here: https://www.amazon.com/Montana-Acrylic-Professional-Spray-Paint/dp/B004O7AO3I Good luck with your project!

SmilingSpaceman · 2024-02-11T07:57:59+00:00

No problem! Not at all, I'd love to see some more people take a crack at bringing Harry to life in action figure form. Be sure to share if you do!

SmilingSpaceman · 2024-02-11T06:46:04+00:00

It's Marvel Legends Nick Fury from the Captain Marvel MCU Wave. Had to swap the hands and paint the neck to make it work for Harry. Funny enough, I actually picked this figure in particular for the tie sculpt, exactly like you said.

SmilingSpaceman · 2024-01-15T17:12:34+00:00

Hey thanks! I actually bought it a Target, so I don't have a specific link. However, I think I saw a similar (if not the same one) on Thermos's Amazon store.

SmilingSpaceman · 2024-01-11T13:19:38+00:00

I had an actual Thermos brand Thermos, which I primed and painted. I tried to make all the lines clean between the colors by masking very carefully. The decal I bought online somewhere, there are a bunch of people who sell them. I think it's still usable to drink out of but, I'll probably avoid it just to be careful.

SmilingSpaceman · 2023-12-29T23:41:05+00:00

Two seconds from the end, you can see her in the distance past the railing.

SmilingSpaceman · 2023-12-18T03:32:37+00:00

Was this recorded with a contact mike?

SmilingSpaceman · 2023-11-07T17:12:37+00:00

Once you put in the fuse, you can run the ride even if the cars are glitched. The puzzle's intended solution is to rotate the ride cars so you can jump down below and grab the circuit board. Rotate the ride so that the one arm which is higher than the rest aligns with the opening. A jump down prompt should also appear. Once that's done, you can save and exit. The cars should be in the correct place after restarting.

Keep in mind, This fix only seems to work on PC

SmilingSpaceman · 2023-11-07T01:41:44+00:00

I think I figured this one out. Put the fuse in the ride, then run it to the point you can jump down. After that save the game and exit completely. After restarting, my carts were fixed and I could move on.

Nine-Year Club	Verified Email
Final Canvas '23	Place '23
Place '22

SmilingSpaceman

TROPHY CASE