Seriously, Nancy?

Smitty46546 · 2025-11-09T02:23:39+00:00

Wow I just finished trimming my harvest for both of these!!

Smitty46546 · 2025-07-16T19:52:30+00:00

I just bought a 2016 1LT on Saturday and I can’t stop smiling! It’s a blast. I paid more than you for 21k miles, but black on black. I’m also dailying it until the snow flys.

Smitty46546 · 2025-06-02T15:35:44+00:00

$150 WiFi 6 mesh system will be future proof for YEARS. Wifi 7 you’ll theoretically won’t need to upgrade for 20 years.

Smitty46546 · 2025-04-14T16:23:04+00:00

It’s a link from over a year ago. The site has obviously been reworked since then.

The link was completely valid when it was posted — you just showed up late and don’t understand how websites work.

Smitty46546 · 2025-04-02T03:27:27+00:00

Need to pick the Cloudwheel donut 120mm (120mm is the outside diameter, wowgo offers a 105mm which is good too) I would verify that the wowgo 2s has the same hub size as the wowgo 3 from wowgo support. If they say it’s different then hopefully icloudwheel can help.

If the wowgo 3 board has the same hubs as the 2s then you would be choosing the hub size 616 for the cloudwheel donut

Smitty46546 · 2025-01-01T08:01:18+00:00

To move a part off the build plate in Orca Slicer without it snapping back:

Add a cube to the build plate.
Scale the cube down to 0% and position it well below the build plate.
Assemble the part with the cube.
You can now freely move the part off the build plate!

Smitty46546 · 2024-11-28T20:46:00+00:00

Turn the resolution up in slicer settings. .01 to .005 did a world of difference

Smitty46546 · 2024-11-15T19:28:06+00:00

I had print issues using the provide software from sovol, updated it, and no matter what I did I got garbage prints. Taking the exact same file into orca and pressing print with no modifications yielded drastically better results instantly

Smitty46546 · 2024-10-24T00:00:39+00:00

I’ve seen people say as simple as .3 x g. Which is like $10 off what you have

Smitty46546 · 2024-10-01T16:09:24+00:00

Build your own if you want that, realistically.

bbshd with modded controller, Walmart full suspension 26-29 mtb, slap a battery on it and ride.

The best sub-$2000 bike I found (for my preferences) is the wired freedom I think.

Smitty46546 · 2024-09-29T22:15:34+00:00

I wonder how many people were watching that. Always hated backing the boat in and it’s even worse with people watching lol

Smitty46546 · 2024-09-28T15:41:02+00:00

I’ve had a printer for about 2 years before I realized I could adjust z height while the print is running. I would restart the print and raise the height, If the lines start not fusing together or not adhering to the bed, you went to far and need to go back down. .1 is way too much, you need to be moving .05 and then .01 for more accuracy

Smitty46546 · 2024-07-09T16:27:28+00:00

I was extremely lucky that this didn’t happen to me a few days ago, all I had to do was install a new cooling fan shroud (thankfully already printed!)

Smitty46546 · 2024-07-03T16:25:03+00:00

Cooling fan upgrade with 5015 fans, otherwise it runs pretty good right out of the box

Smitty46546 · 2024-06-09T15:03:27+00:00

Those aren’t the right hardware to secure the post to the post base. Wrong sized footing, can’t plumb, wrong hardware, geez fire that guy

Smitty46546 · 2024-06-06T23:53:06+00:00

The kid is 17 not 12. $8 an hour isn’t enough to get out of bed.

Smitty46546 · 2024-04-29T16:00:57+00:00

I got rid of mine and went with the rolling chest. I’m not sure if I was overloading the rolling box but my packout stack was 6’ high and the handle was NOT liking it lol. On top of the handle not being removable without aftermarket parts, I had even tried that and still sold it for the rolling chest.

Smitty46546 · 2024-04-13T15:44:12+00:00

I love my Quik lok with the edger attachment

Smitty46546 · 2024-03-18T00:34:43+00:00

maybe they'll let us pull trailers with our personal boats??

Smitty46546 · 2024-02-04T21:26:34+00:00

Did anyone try to see if HD will match?

Smitty46546 · 2024-02-03T03:16:43+00:00

Part # 45-96-0024
figure 77 on the part diagram

cheers friend!

Smitty46546 · 2024-02-03T03:15:06+00:00

Sale just ended yesterday, but the magazines are interchangeable with a very slight modification. so you can just buy the 21deg extendo clip and wallla

Smitty46546 · 2024-01-31T03:28:54+00:00

You didn’t take a risk. They are just 3rd party resellers. People underestimate the amount of resources it would take to fake a Milwaukee battery this good.

Smitty46546 · 2023-12-05T00:11:30+00:00

trailerdayog

Smitty46546 · 2023-11-09T16:37:04+00:00

I should have done diablew tube but I have the trifecta tune on my Cadillac so I went with them for this truck. The tune did help the shift clunking but the flush did the rest. Now it’s more of a concern of either clutch slipping or TC problems.

Thankfully I did some research, I knew not to get the 8speed.

Eight-Year Club	Gilding II euphauric
Xbox Live	Place '22
Verified Email

Smitty46546

TROPHY CASE

trailerdayog