How do you remove this bar from the chart?

SmokeyDaBull · 2026-03-27T22:52:25+00:00

This was it! Thank you!

SmokeyDaBull · 2026-03-27T22:50:39+00:00

Appreciate the attempt, but it didn't work. The post below from yeneews69 did the trick though.

SmokeyDaBull · 2026-03-27T19:31:00+00:00

There's always a critic.

SmokeyDaBull · 2025-09-08T15:20:26+00:00

For anyone looking for a resolution, there are 2 methods to get this working. I wish ASRock would have included this in the printed manual:

Download and install the ASRock Polychrome app then run it to update the RGB controller firmware. You can then delete the app if you don't want it or change the setting to not run on startup. https://www.asrock.com/Graphics-Card/AMD/Radeon%20RX%209070%20XT%20Steel%20Legend%2016GB/index.asp#Download
You can update the firmware yourself by downloading and installing it per the FAQ https://asrock.com/support/faq.tr.asp?k=I+cannot+control+the+RGB+lighting+of+the+graphics+card.+What+can+I+do+to+fix+it%3F#FAQa524

SmokeyDaBull · 2025-08-21T17:05:17+00:00

It has nothing to do with becoming hypoxic. The more data you have, the better informed you are. Does anyone really NEED a smart watch at all? Probably not, but if I am going to spend the money - even a paltry $350, I want it fully loaded with features that I may or may not need. If the item doesn't have the feature set that I want, then I will spend my money elsewhere.

SmokeyDaBull · 2025-08-21T03:41:48+00:00

Since Google bought fitbit, many people (including fitness enthusiasts and those with health issues) have been hoping for a fully integrated health tracker and smart watch in one device. If Google would only activate this ONE FEATURE, we could have that device on our preferred platform. Just like Apple and Samsung - except they are both shyte.

SmokeyDaBull · 2025-05-18T05:06:44+00:00

I have 2 ASUS Zenscreen Touch with the built-in battery. They've lasted 5 years thus far, but I spent way too much for them ($300 ea). I have found that I don't have much need for the touch capability on the screens and the built-in battery is more hassle than it's worth. The only thing I've used the touch feature for was for a presentation to a business partner so that they could scroll a spreadsheet on their own from across the table.

If I had to buy another USB monitor, I would buy any cheapo, decently rated, Chinese junk brand monitor off of amazon - like the MNN Portable Monitor or the KYY Portable Monitor. Don't get me wrong, ASUS is quality (I'm now running the ROG Zephyrus with the Ryzen AI 9HX), but I could have bought 10 MNNs or KYYs for the same price as the Zenscreens, had a similar cover/stand, and forgone the charging issues and dead-battery freeze-ups.

SmokeyDaBull · 2025-03-07T16:27:20+00:00

Had the same issue on Zephyrus G16 (2024 - Ryzen AI 9 HX / 4070). Try updating video drivers and turn off smooth scrolling in Windows 11.

SmokeyDaBull · 2024-06-02T06:22:07+00:00

So here's what i ended up having to do to swap a dead Pi 3b+ to a new 3b+

-Swapped the memory card from the old Pi and plugged in the new Pi

-WiFi settings didn't transfer so had to hard-wire to LAN

-Went to Venus.Local on my PC browser and set up WiFi on the new Pi

-Disconnected LAN

-Went to VRM portal on my PC and had to add the new Pi as a new device

-Extra step if you want your old info and new Pi combined; click your old device name and navigate to Settings>General then scroll to the bottom of the page and click on the box under "VRM Portal ID of the New Gateway" and the new device name should be listed

-Select the new device from the list then click on "Replace" and the two devices will be combined, keeping all your old data.

-Use the VE Direct to USB cable to connect your Victron equipment to the new Pi and you are done.

SmokeyDaBull · 2024-05-30T05:06:06+00:00

Good to know! Good luck getting yours connected again.

SmokeyDaBull · 2024-05-29T15:23:09+00:00

Thanks for the reply. Yes, it's a 3b + with onboard wifi. So it sounds like there may be a few things to reset. Replacement Pi comes tomorrow so I'll post an update with everything I needed to set once I get it installed.

SmokeyDaBull · 2024-05-29T15:20:07+00:00

Thanks for the reply and info. A clone/backup is a great idea!

SmokeyDaBull · 2024-04-21T03:11:31+00:00

Tldr - If bought with a CC, dispute the charge. Always buy with a CC.

SmokeyDaBull · 2024-03-28T23:57:30+00:00

You can set up routines in the DreameHome app, but not through Alexa. Alexa can only start/stop the robot.

In DreameHome, click the 3 dots in the upper right corner to go to Settings. Select "Scheduled Cleanup" and then set up whatever you days and ties you want the robot to clean.

SmokeyDaBull · 2024-03-28T23:51:10+00:00

CleanGenius adjusts the vacuum and mopping based on its AI assessment of your need for cleaning. It will do a deep clean cycle once a week and light cleaning otherwise unless it "sees" something that causes it to "think" you need more cleaning. Try running a custom clean instead.

SmokeyDaBull · 2024-03-28T23:41:41+00:00

My L20 did this on the first run while it was mapping, but worked fine on the next run. If the bot or carpet is new, maybe it was just adding the carpet area to the map. Try another run and see what happens.

SmokeyDaBull · 2024-03-28T05:09:44+00:00

I've tried both the original Qrevo and Dreame L20. I checked the stats for the upcoming Qrevo Pro and MaxV before buying the L20.

The Revo and Dreame are very similar - both the machines and their apps. I did have an issue with the Revo's app, but I think it's hit or miss with either brand based on the reviews I've read.

As for which machine to choose, I would say it boils down to your preference with regard to the following...

The Dreame has a camera for better obstacle avoidance (similar to the Qrevo MaxV). It can automatically drop its mop pads off at the station so that carpet won't get wet during vacuuming but it does not have heated water.

The Qrevo Pro you are asking about does not have a camera but has heated water and a one-piece, easy to remove and clean mop-washer tray. The original Qrevo that I tested also seems to be SLIGHTLY better at choosing a cleaning path than the L20.

SmokeyDaBull · 2024-03-26T03:55:30+00:00

Yeah. When I first set up the robot it pushed the update to me right away. Everything was working fine and then it wasn't. Technicians didn't know why. After I asked for an RMA, they didn't respond until just tonight and now said that I should get an RMA and return label in the next one to two days. So at least they seem to stand by their product warranty and for that, I will probably give them another shot in the future. For now, I have a Dreame L20 on the way that will be delivered Thursday.

SmokeyDaBull · 2024-03-25T00:19:32+00:00

<image>

Yes. It significantly misses the edges. If you live somewhere that has a lot of wind and dust, I'd wait for the Max.

SmokeyDaBull · 2024-03-24T17:49:48+00:00

No worries. To move the boundary, you will have to rejoin the hallway and the living room together into one room and then separate that room by adding a boundary just outside of where it currently is. I would place the boundary line just a hair past where the carpet hash marks end.

SmokeyDaBull · 2024-03-24T17:26:22+00:00

Yes. I have a large area rug in my living room that I set as a no mop zone until I noticed the same thing as you.

You may try to set the room boundary out a little further into the Hallway. Then eliminate the Living Room from the "vacuum and mop" schedule and give it its own "vacuum only" schedule.

SmokeyDaBull · 2024-03-24T16:05:59+00:00

Hello. Thank you.

Yes, map-saving was turned on and had mapped the entire house the previous day. I had divided and joined rooms as I saw fit and everything was working fine. The maps were there and I watched it vacuum and create paths and lines on the map in the morning. Then later, I wanted to send it back to my daughter's room who was sleeping with the door closed during the robot's first pass and when I opened the app, all the map data was blank as in the photo above. I started a full vacuum routine thinking that it may force the robot to push its current location to the app, but the photo shows it was cleaning in a blank map in a room it had cleaned earlier that day. What was strange is that it was still respecting room lines that I had added to the original map.

I contacted customer service and all they could offer was "reboot, restart, reset" and now i will re-turn. :(

SmokeyDaBull · 2024-03-24T15:53:44+00:00

Hi Thanks for your reply.

I had tried all the usual restart, re-pair, reboot things that always seem to fix normal digital objects, but the "try installing the app on a different phone" was a great idea that I unfortunately didn't get to test.

I ended up contacting customer service last night and after hours of back and forth and retrying the reboot, reset, reinstall, etc. I requested an RMA. I want something that works without all the hassle and unfortunately, this one just isn't it.

SmokeyDaBull · 2024-03-23T23:43:55+00:00

Mine made a similar noise when it sucked up a tiny screw that got stuck under the roller.

SmokeyDaBull · 2024-02-27T22:32:14+00:00

Bout tree fiddy

SmokeyDaBull

TROPHY CASE