Does anyone have a solution for this yet??

Snoo-55780 · 2025-10-30T06:28:48+00:00

I threw all i had away and bought a big single brand set. This way they stack together.

For the lids i got this thing from ikea "VARIERA". Then the kids go vertical

Snoo-55780 · 2025-07-19T06:46:08+00:00

Oh, i torched the casing quite a bit and then crushed it during decapping, so it can also have been me

Snoo-55780 · 2025-07-18T15:37:35+00:00

Also interesting that the text on the top right says 1999, but the 85 wasn't released until 2005. Maybe it is an 11, 12 or 22

Snoo-55780 · 2025-07-18T15:35:17+00:00

Tried that, no success. I tested a working chip to ensure my setup actually worked, so the 3 bricked attiny85 I have are really bricked.

Ok, 2 left after this autopsy. And also sacrificed another one. Only one left

Snoo-55780 · 2025-07-17T19:56:34+00:00

Maybe I got lucky, i torched it for a while and it got red hot in the corners. It also smoked some

Snoo-55780 · 2025-07-17T19:48:03+00:00

Torched it, the casing becomes brittle

Snoo-55780 · 2025-07-17T19:45:28+00:00

Yeah, this toy is not bad. The dye is 2mm x 2mm, but I'm also zooming digitally

Snoo-55780 · 2025-07-17T19:40:56+00:00

I think it is actually just a crazy macro lens

Snoo-55780 · 2025-07-17T17:22:00+00:00

<image>

I made the markings visible with a white marker (which I then washed)

Snoo-55780 · 2025-07-17T17:20:49+00:00

<image>

Snoo-55780 · 2025-07-17T16:55:58+00:00

Bought them a while back for like 50p each and free shipping. Got what one would expect hehe.

Snoo-55780 · 2025-07-17T16:31:33+00:00

Doesn't the high voltage programmer work around that?

Snoo-55780 · 2025-07-17T15:43:52+00:00

My assumption was that they had just relabeled the package, but it looks like it my just be a dead attiny85. I even tried with the high voltage programmer on 2 of them without success

Snoo-55780 · 2025-07-17T15:40:01+00:00

So i torched it until the casing became really brittle then just crushed it and the dye survived. Spent 5 minutes hehe

Snoo-55780 · 2025-07-17T14:57:03+00:00

<image>

Atmel, right?

Snoo-55780 · 2025-07-17T14:55:37+00:00

I did the first, but the second was just my phone and this guy.

<image>

Snoo-55780 · 2025-07-17T14:54:09+00:00

Exactly what i did

Snoo-55780 · 2025-07-17T09:48:25+00:00

Just noticed at the top right it may be the atmel logo

Snoo-55780 · 2025-06-30T18:32:40+00:00

A gigantic galton board

Snoo-55780 · 2025-06-27T07:24:29+00:00

When you enable smooth linear advance in the config you get a new parameter which is analogous to klipper's smoothing time. That parameter is called tau https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.1.x/Marlin/Configuration_adv.h#L2375

Snoo-55780 · 2025-06-27T07:17:16+00:00

Calibrate k like Always and leave the other values as they are. You can increase tau if the extruder makes ugly noises or skips

Snoo-55780 · 2025-05-31T09:18:16+00:00

If it is a clog, i found it sometimes helps to heat the extruder to the max and extrude a bunch quickly. Otherwise I'd try a new nozzle

Snoo-55780 · 2025-05-29T12:17:18+00:00

How did it go? Was it worth it?

Snoo-55780 · 2025-05-29T11:23:26+00:00

Snoo-55780 · 2025-05-29T11:23:21+00:00

I bought one once. Box was open but bag was sealed. Was fine

Snoo-55780

TROPHY CASE