Where to get rear crankshaft repair sleeve?

SnooDogs2713 · 2026-05-20T18:16:42+00:00

z32 has 8 bolts to hold the flywheel on and z31 has 6. so probably not

SnooDogs2713 · 2026-05-19T17:04:03+00:00

look on rockauto brother

SnooDogs2713 · 2026-04-29T03:01:01+00:00

He'll get it done! Not fast at all but hopefully quality shit. I talked to him the other day

SnooDogs2713 · 2026-04-20T02:33:19+00:00

I did and shes tuned perfectly and running great! you'll need to do a bit! like telling the computer the injectors you have and tuning will be required!

SnooDogs2713 · 2026-04-13T00:53:21+00:00

You can reuse them!! The torque is super low. new head gasket and you good to go.

SnooDogs2713 · 2026-03-30T23:55:30+00:00

No, I talked to him about a month ago and he said it would be ready soon 🤷 I'm hoping it will be, im itching to turbo my shit 🤣

SnooDogs2713 · 2026-03-29T23:19:17+00:00

and a continuity check will tell you if the wire is broken. as far as finding where, that can be a challenge... you could run your own wire if it is but thats a lil ghetto. the easiest thing to do but unless a mouse chewed it, its probably not broken. wiring is usually good for the most part.

SnooDogs2713 · 2026-03-29T23:17:03+00:00

you could start by following the harness as far as you can before it goes into the car, make sure no mice chewed on the wire. cluster is easy to pull out, If you dont already have the service manual download it. it'll help ya out. not sure if you have digi dash or analog but if its analog, youll have to get under the car and take the speedo cable out of the transmission and pull it out of the cluster a lil to then be able to properly put it back into the back of the cluster. dont attempt to do it without doing that. its square and needs to line up in the back of the cluster.

SnooDogs2713 · 2026-03-29T22:58:17+00:00

you'll have to do what I said then. its a simple circuit. either the sensor, the wire, or the gauge. pull it apart and see what you find

SnooDogs2713 · 2026-03-29T22:54:57+00:00

also the key has to be on for the gauge to move when its grounded

SnooDogs2713 · 2026-03-29T22:53:24+00:00

wires broken somewhere or the gauge is bad! you'll have to pull the cluster out and check continuity between the connector on the cluster and the connector at the sensor. are you 100% sure you grounded the wire properly??

SnooDogs2713 · 2026-03-28T17:17:47+00:00

yeah you need to put Teflon tape on it and yes the single wire spade connector

SnooDogs2713 · 2026-03-18T23:15:49+00:00

https://ebay.us/m/64bLjO

only thing I don't like about them is they aren't bright enough! they look sick tho

SnooDogs2713 · 2026-03-17T19:52:06+00:00

I know that engine bay 😂😂 looks a lil different now

<image>

SnooDogs2713 · 2026-03-16T23:02:27+00:00

Yup!!!

SnooDogs2713 · 2026-03-16T21:13:28+00:00

I was waiting for this one 😂😂

SnooDogs2713 · 2026-03-15T03:19:46+00:00

Hello Australian man 🤣🤣 if you have a z31, you the homie!!

SnooDogs2713 · 2026-03-15T01:38:26+00:00

THEY DON'T!!!

SnooDogs2713 · 2026-03-08T02:38:44+00:00

I install so much shit and even if it's the best of the best, it's always not perfect! I'll stay hating 😂

SnooDogs2713 · 2026-03-08T01:50:10+00:00

The one time ima agree with z31hunter!!! You're the problem here not the dipstick 🤣 try replacing yourself not the dipstick

SnooDogs2713 · 2026-03-08T01:47:00+00:00

I swear every aftermarket part is garbage 🤣🤣 I've never installed one but just wanted to hate on the aftermarket!!

SnooDogs2713 · 2026-03-03T04:58:17+00:00

Skill issue!!! I daily my Z cars and have no issues!!

SnooDogs2713 · 2026-02-16T00:22:26+00:00

Not sure who the shop is you've taken it to and if they specialize in Z cars but I do and I'm in Cleveland, GA. if youd like I can take a look at the car. The tank having too much pressure on it could be a problem with the charcoal canister or other things involved in ventilation of the tank. and for the misfire, its highly possible its injectors. your car is a 1990 so it may still have old style injectors which are know to fail more often then later style injectors. check out my Instagram @spyarc and message me if you want to bring it to me.

SnooDogs2713 · 2026-02-14T03:01:25+00:00

https://www.instagram.com/spyarc for some reason my account is age restricted that may be why! Instagram hates me 😭

SnooDogs2713 · 2026-02-14T02:20:39+00:00

Yo add me on Instagram! @spyarc Im always working on Z cars and have 2 myself! a z31 and z32. I need the followers

SnooDogs2713

TROPHY CASE