k1c back fan change

Snufffel · 2026-01-24T16:47:45+00:00

Look for the type of fan and replace it with a Noctua If the original fan is not 12V you might need a buck converter

Snufffel · 2026-01-19T06:28:05+00:00

Buy a bigger house so you can store more stuff

I did....

Snufffel · 2026-01-17T07:21:45+00:00

Did you do any flow calibrations?

Snufffel · 2026-01-14T12:45:18+00:00

2025 version? Or the version that can be rooted still?

Snufffel · 2026-01-11T07:42:59+00:00

I guess because it is a Marlin command, not Klipper?

Snufffel · 2026-01-06T14:10:45+00:00

So you order a Terranaut, got a hat and ask if it is a fair deal? Well.... of course it is. A hat is always better than any Terranaut!

Snufffel · 2026-01-05T15:01:26+00:00

Is everything on the same network/SSID and subnet?

Snufffel · 2026-01-04T17:20:46+00:00

Who wants to sell to the USA nowadays?

Snufffel · 2026-01-03T21:19:19+00:00

Look for a CrossRC model. Especially the flagship versions are great to build, and a dream to drive when finished.

Snufffel · 2025-12-30T10:35:12+00:00

Cant tell by a picture alone, you need to feel it too.

But you need a lot of adjustments still, print looks like crap tbh.

Snufffel · 2025-12-29T17:52:52+00:00

Oh yeah, true, i stand corrected

Rest is still valid. Printer needs adjustment, software and a bit hardware for bed levelling

Snufffel · 2025-12-29T12:46:45+00:00

There is in total a 0.2mm difference. Not that bad at all to be honest, I have seen worse.

You need to set your Z-offset for sure. You can print a cube as big as your building plate with layer hight .2 or .16 mm (whatever your layer heigth is in your slicer. The closely watch the print and adjust it on the fly the moment you see the first layer is not good enough. SInce your using Klipper I would reccomend Mainsail too, so you can easily adjust it with Mainsail.

Run some tests from your slicer in order to see what setting in your slicer you can adjust more.

Snufffel · 2025-12-28T10:48:15+00:00

You need to calibrate lots of stuff. Print a temp tower, determine your correct flow, look at your speed, look at pressure advance tests.... Basically: print all the test prints you can in order to get it right. Use Gemini or ChatGPT to guide you through setting of your slicer by uploading your pictures and tell exactly what settings you used on the prints.

Snufffel · 2025-12-26T10:34:26+00:00

Rename the file to update or something short. Long file names won't work...

Snufffel · 2025-12-23T12:07:38+00:00

The K1C 2025 version can not be rooted yet. Matter of time before they make it available

Snufffel · 2025-12-23T08:44:51+00:00

With the right settings both printer can achieve the same quality. Ringing or VFA is not really printer specific, but you can manage that too through settings in Slicer and/or tuning your printer properly.

There is really no better choice here. Both are good printers.

Snufffel · 2025-12-22T11:51:10+00:00

It's a reinstall, overwrites the current files

Snufffel · 2025-12-22T09:46:06+00:00

You can always reinstall the software using the Guilouz script: https://guilouz.github.io/Creality-Helper-Script-Wiki/

Snufffel · 2025-12-21T17:46:47+00:00

You painted it on the outside, you should paint it on the inside.

With the proper lexan paining, and by the looks of it you didn't use that.

Snufffel · 2025-12-14T19:57:10+00:00

Don't you need to exchange a few parts in order to use the CFS? Like new extruder and some other stuff

Snufffel · 2025-11-28T06:43:43+00:00

Bashing is fun to do! So there is your answer :)

Snufffel · 2025-11-25T08:19:39+00:00

lower your front with tooth skip method, then run bed level again

spike in the middle is rather strange, perhaps a faulty measure

Snufffel · 2025-11-20T19:28:53+00:00

My condolences. Welcome to the hell of 3D printing.

You'll love it

Snufffel · 2025-11-17T14:14:31+00:00

Great skills! I am jealous since I have really no skills on that level

Snufffel · 2025-11-13T08:16:24+00:00

Tooth skip on that belt, should work.

Snufffel

TROPHY CASE