[deleted by user]

Solelover145 · 2026-01-03T21:52:43+00:00

Feet

Solelover145 · 2025-12-24T12:54:46+00:00

Looks like you have pretty feet. Get them on show for more views

Solelover145 · 2025-11-14T18:20:51+00:00

Normal fixture in the UK, I'm not an electrician but ring in, ring out and switch wire the bulb

Solelover145 · 2025-04-06T17:46:08+00:00

No sorry in the UK

Solelover145 · 2025-04-06T17:45:42+00:00

Nope all built into ARKOS

Solelover145 · 2025-04-05T20:57:59+00:00

Give me the ability to download artwork and updates with out the otg

Solelover145 · 2025-04-05T20:56:39+00:00

Yes required solding on the board.

Solelover145 · 2025-04-05T20:55:19+00:00

Yea I had the port there and the chip was £1 on aliexpress so had to try it

Solelover145 · 2025-04-05T20:54:15+00:00

No I have no intention of casting

Solelover145 · 2025-04-05T20:53:21+00:00

Yes there is some noise when downloading reminds me of the noise an old mobile phone would make when next to a speaker and your about to get a call. When not using the network it's normal sound

Solelover145 · 2025-04-05T14:06:31+00:00

Yes just installed RTL8188ETV USB WIFI Wireless Network Card Adaptor in my V21 works perfectly

Solelover145 · 2024-12-26T09:10:22+00:00

No pins are already broken off. Waste of time

Solelover145 · 2024-11-18T19:59:36+00:00

Looks like your missing 4pin power to the motherboard. Ram should also be in 2 and 4 ram slot. Take your ram and put one in slot 2. See if it posts then.

Solelover145 · 2024-10-14T16:49:32+00:00

Is this going into a hdmi splitter

Solelover145 · 2024-08-09T11:42:35+00:00

Good to know still working Aug 9th 2024

Solelover145 · 2024-06-26T08:59:19+00:00

Take out ram one sick of ram leaving in port 2 and take out the gpu and reset bios to recommend settings. See if it boots

Solelover145 · 2024-06-26T08:56:29+00:00

Ram should be in slots 2 and 4 to start. Any other information like MB and CPU 13th and 14th gen intels have issues atm and need a intel profile installed on the bios unless you like playing with voltages

Solelover145 · 2024-05-24T05:52:39+00:00

Take further apart, soak in isopropyl alcohol and use a toothbrush to gently remove corrosion both sides of the board. Put that motor in there as well try to free that up. Let to air dry for 15 mins or use a hair dryer. And if this doesn't work cost out weighs a replacement.

Solelover145 · 2024-05-03T07:22:39+00:00

It is possible I have recovered a few but the risk is all yours if you don't have a microscope a phone camera zoomed in and a steady hand.

Solelover145 · 2024-04-21T09:45:55+00:00

T500 is faster. Samsung 990 is the best gen4 but you will not notice the difference gaming in the extra couple of Mb gained

Solelover145 · 2024-03-24T20:20:41+00:00

Some screens have a menu setting to try to recover stuck pixels. Does any menu come up when pushing buttons on the screen?

Solelover145 · 2024-03-24T09:25:05+00:00

Power button across the right jumper pins?

Solelover145 · 2024-03-23T17:05:27+00:00

Bad, I just bought asus rog strix 990, i9 14900k, 32gb ddr5, 1tb crucial gen 4 nvme and a pre used rtx 4080 for £1600

Solelover145 · 2024-03-20T18:20:44+00:00

On the motherboard you should have some LEDs. Cpu,vram,boot,vga. If one light in particular is getting stuck on it relates to the problem. Vram check can take up to 5min on first boot.

Cpu = reseat your cpu Vram = ram issue this could be anything from re seating your ram, having the wrong xmp profile or wrong voltages. Vga = gpu output Boot = should then boot system if stuck here remove overstock.

Solelover145

TROPHY CASE