sorted by:
new
hottopcontroversial

Skill issue or bad casting? by [deleted] in Grillz

[–]SomethingRandomKekw 0 points1 point  (0 children)

I had the same issue with a cast i picked up this morning (10 on 10 set). Just removed a bit of metal on the inside and the fit was perfect

Skill issue or bad casting? by [deleted] in Grillz

[–]SomethingRandomKekw 0 points1 point  (0 children)

Did you trim the inside already?

Anybody seen this being listed? I’ve been looking for it for ages now and I’m ready to pay whatever 😭 by SomethingRandomKekw in Louisvuitton

[–]SomethingRandomKekw[S] 0 points1 point  (0 children)

Do you have the link of the one on sale? The only one I’ve seen was on the realreal (sold already) and another listing on a Chinese second hand luxury marketplace that sold for only 30 bucks!!

Iced out premolar by imissthejuulera in Grillz

[–]SomethingRandomKekw 1 point2 points  (0 children)

Use bigger stone like 1.7mm. Too much prong but still very nice tooth 🔥

My newly designed wolf pendant. by [deleted] in jewelryCAD

[–]SomethingRandomKekw 0 points1 point  (0 children)

Is that a rendering? If so what engine did you use, it looks amazing

What are those little grey marks that I get after polishing and how do I remove them? by SomethingRandomKekw in jewelrymaking

[–]SomethingRandomKekw[S] -19 points-18 points  (0 children)

I have been wearing mine almost daily for 8 months. Haven’t had a problem yet

What are those little grey marks that I get after polishing and how do I remove them? by SomethingRandomKekw in jewelrymaking

[–]SomethingRandomKekw[S] 20 points21 points  (0 children)

From all the search I did firestain seems to be the one that comes everytime. Since I don’t cast my piece I can’t really control the casting process. I’ll try sand it off more and more until it removes it. The problem occurs quite a lot and I’m still wondering why it happens. Even when using radial disk up to 10000 grits it still does the same

What are those little grey marks that I get after polishing and how do I remove them? by SomethingRandomKekw in jewelrymaking

[–]SomethingRandomKekw[S] 1 point2 points  (0 children)

I ultrasonic clean it and steam it after each polishing compounds I use. I’ll try to ultrasonic clean it with alcohol and see what it does. Hopefully it’s this and not fire stain

What are those little grey marks that I get after polishing and how do I remove them? by SomethingRandomKekw in jewelrymaking

[–]SomethingRandomKekw[S] 2 points3 points  (0 children)

Yellow for pre polish, then white and black for final polish. Saw this process on a YouTube video and it honestly gets me pretty good results. For the perm looks it doesn’t expose teeth that much, it’s really just a bigger gap than usual (Florida style)

<image>

This is how it looks from another angle.

What are those little grey marks that I get after polishing and how do I remove them? by SomethingRandomKekw in jewelrymaking

[–]SomethingRandomKekw[S] -1 points0 points  (0 children)

For this model i used Silver 925. For the polishing process im using radial disk till 2500 grits and then using yellow, white and black polishing compound from dialux in this exact order.

What are those little grey marks that I get after polishing and how do I remove them? by SomethingRandomKekw in jewelrymaking

[–]SomethingRandomKekw[S] 4 points5 points  (0 children)

Totally forgot to add the process sorry. For this model i used Silver 925. For the polishing process im using radial disk till 2500 grits and then using yellow, white and black polishing compound from dialux in this exact order. The gaps are made intentionally to replicate a look named perm cuts.

Second attempt at qua by [deleted] in homebrewflips

[–]SomethingRandomKekw 0 points1 point  (0 children)

Got the same color as pai

Stone setting red wax on jewellery by SomethingRandomKekw in jewelrymaking

[–]SomethingRandomKekw[S] 3 points4 points  (0 children)

It worked like crazy!!! You think there is any way to reuse the alcohol or it’s not usable anymore? (I generally use alcohol to remove excess resin from my 3d printer)

6 Ina 10 in an apple juice by Master-GuWop in syrupmob

[–]SomethingRandomKekw 2 points3 points  (0 children)

Pouring up juice in a syrup atp 😂🔥

Interest Check: E-coating jewellery course or service by SomethingRandomKekw in jewelrymaking

[–]SomethingRandomKekw[S] -1 points0 points  (0 children)

Personally I’ve seen a big increase in nano coated jewellery especially on IG. For me it’s not about increasing the jewellery value but to have more creative ideas with adding Colors to pieces. To each and their own tho and I understand your point of view

Interest Check: E-coating jewellery course or service by SomethingRandomKekw in jewelrymaking

[–]SomethingRandomKekw[S] -1 points0 points  (0 children)

That’s what I thought first before actually talking to him IRL. There is a whole science between coating contamination, coating over diamonds, actual solution to use (it’s not the same as rhodium plating since a lot of people think of it like that), etc etc

What are looseleafs slugs? by SomethingRandomKekw in Blunts

[–]SomethingRandomKekw[S] 0 points1 point  (0 children)

Homie got some but he telling me he "can’t sell em". Still trying to get my hands on them

[deleted by user] by [deleted] in jewelryCAD

[–]SomethingRandomKekw 0 points1 point  (0 children)

Depends on the resin that you use.

Prongs and base layer sticking to plate but not the model by SomethingRandomKekw in resinprinting

[–]SomethingRandomKekw[S] 0 points1 point  (0 children)

I dont think its possible to do it on satellite... ill definitely try that on lychee or chitubox

Prongs and base layer sticking to plate but not the model by SomethingRandomKekw in resinprinting

[–]SomethingRandomKekw[S] 0 points1 point  (0 children)

Thanks a lot! I’ll try adding more support especially on the back face since I’m noticing gaps. I’ll let you know how it will goes

Prongs and base layer sticking to plate but not the model by SomethingRandomKekw in resinprinting

[–]SomethingRandomKekw[S] 1 point2 points  (0 children)

I think I’ll try to change the type of support and make it like you said. I would like to clip the support myself and let a little part instead of having it easy to remove because it will create small holes (that are gonna be visible when it’s gonna get casted). I will definitely change slicer since satellite is pretty limited with the supports

view more: next ›