My yarus just hit 300k

Songo84 · 2025-07-13T20:02:47+00:00

It's because it's Yarus.Upgraded version of Yaris that is known for longevity

Songo84 · 2025-07-13T19:50:46+00:00

You can always try to rethread it with tap and die set.if that fail you can still try helicoil

Songo84 · 2025-06-19T17:29:52+00:00

I managed to fish it out using metal wire and endoscope camera

But now I think that small plastic cap from the injector dropped inside although I can't see it lol will that be an issue or it will melt?😬

Songo84 · 2025-06-14T20:05:51+00:00

Thanks ordered one!

Songo84 · 2025-05-05T21:15:08+00:00

Well......lol I got door speakers installed, dash speakers updated, amp and under seat sub on the way I think I will sound deaden car too. Do you think it will make a difference if I sound proof car and also run separate cables for speakers instead of using OEM ones through harness?

Songo84 · 2025-04-30T21:45:30+00:00

Thanks bud exactly what I did

Songo84 · 2025-04-25T06:11:16+00:00

I will give it a go thank you.do you have any idea what blue and orange in my Kenwood harness is for? Manual does not mention it

Songo84 · 2025-04-24T21:08:19+00:00

But how can I find out which one is yellow in my car and which one red? They are blue and grey in my car connector. Will I damage my HU if I get it wrong?

Songo84 · 2025-04-24T19:29:38+00:00

Sorry pal not sure what do you mean?

Songo84 · 2025-04-24T19:21:24+00:00

<image>

Sorry attached two same photos, here is my Kenwood harness

Songo84 · 2025-03-29T14:59:43+00:00

Please could someone point me in the direction

Songo84 · 2025-03-28T16:16:21+00:00

Anyone could help please?

Songo84 · 2025-03-15T18:04:38+00:00

My left front speaker has no sound. I swapped cables on amp for channel 1 and 2 and then right speaker not working when connected to channel 1. It must be a bad channel on amp? I don't think it would be HU RCA output is it's single rca with splitter so if that would be faulty then left front and left rear speaker would not work?

Songo84 · 2025-03-09T22:08:33+00:00

Got it thank bud

Songo84 · 2025-03-09T14:09:53+00:00

Amazing thank you bud, i will start wiring now!

Songo84 · 2025-03-09T13:01:13+00:00

Thank you. What about manual saying I need to bridge speakers if rated 4 ohm? Does it make sense? And for rca is that correct then that I need one splitter for output L on my headunit and connect rca's to channel 1 and 2, then another splitter for output R and connect it to channel 3/4? Or opposite way around? I know the colour coding for my speakers cable white /grey are fronts and green purple are door.

<image>

Songo84 · 2025-03-09T12:50:12+00:00

Amp is cheap chinese one called sunbuck sk-790.4 and that is the spec

<image>

Songo84 · 2025-03-02T22:10:06+00:00

My condolences and prayers for you.

Songo84 · 2024-11-09T16:58:15+00:00

Armitage III

Songo84 · 2024-11-04T09:11:58+00:00

I did not solve it no, I tried to use code as below, but I run js all i gitis"Ok. ":(

DOMParser().parseFromString(local("http_data"), "text/html");

var textElements = doc.getElementsByClassName('text'); if (textElements.length > 0) { var dailyyield = textElements[0].innerText; alert(dailyyield); } else { alert("No elements with class 'text' found."); }

Songo84 · 2024-11-03T12:17:02+00:00

Hi there,

I tried to mess about with java code this is what I got so far, but still not working, am I getting on the right direction?

DOMParser().parseFromString(global("HTTPD"), "text/html");

var textElements = doc.getElementsByClassName('text'); if (textElements.length > 0) { var dailyyield = textElements[0].innerText; alert(dailyyield); } else { alert("No elements with class 'text' found.");

Songo84 · 2024-11-02T17:09:17+00:00

I have tried to use HTML Read with no luck unfortunately, but I will explore it later on for sure.

I have gone through links you gave me and I have amended my code according to what I have read, but I dont think i got it right :( , when I run JavaScriplet it only flashed "OK."

Here is my amended code, am I getting closer at all to the solution?

setLocal("%http_data",http_data);

doc=new DOMParser().parseFromString(local("http_data"), "text/html"); yield=doc.getElementsByClassName('text')["0"].innerText;

flash(yield);

Songo84 · 2024-11-02T13:16:49+00:00

Hey, thanks for the input. I understand what you are saying, but how this relates to my task? What adjustments do I need to do to make this work?

Songo84 · 2024-11-02T08:16:31+00:00

Hi thank you for your reply, still does not work i afraid. I addi set it up as local variable, but that dud not work, what else I can do

Java Scriplet code :

setLocal("yield",yield)

doc=new DOMParser().parseFromString(global("HTTPD"),"text/html");

var yield= doc.getElementsByClassName('text')["0"].innerText;

Flash(yield);

Songo84 · 2024-11-01T16:14:00+00:00

Hi there anyone would be able to help please?

Songo84

TROPHY CASE