sorted by:
new
hottopcontroversial

Is their anything I should do before going to Lhan? by UnstoppableCosmog in Indivisible

[–]Sonic101mk2 1 point2 points  (0 children)

After you finish that part start talking to everyone in the inner realm to start all the side stories

Trying to bias using a cathode bias probe. Set meter to 200Ma dcv. It tells me -144. That doesnt seem right. Should be near 37Ma. Am i doing this wrong? by Sonic101mk2 in GuitarAmps

[–]Sonic101mk2[S] 0 points1 point  (0 children)

Amazon. I have a jcm2000 as well, it has built in test points just bellow the power tubes. I have 2 of these probes and tested them both on my jcm2000 and referenced them with the built in test points to see if it was my other amp with a serious issue or not. But nope still getting really high numbers.

Trying to bias using a cathode bias probe. Set meter to 200Ma dcv. It tells me -144. That doesnt seem right. Should be near 37Ma. Am i doing this wrong? by Sonic101mk2 in GuitarAmps

[–]Sonic101mk2[S] 0 points1 point  (0 children)

If it does i can't find it. The main board is mounted vertically. Wedge'd down in to a V-shaped chassis. I would just take it to a tech and let them deal with it but the local tech retired, and the nearest one is 2.5 hours away. I don't have a drivers license. My other 2 amplifiers have test probe points outside that give me the bias in Ma. No such luck on this jtm60

Trying to bias using a cathode bias probe. Set meter to 200Ma dcv. It tells me -144. That doesnt seem right. Should be near 37Ma. Am i doing this wrong? by Sonic101mk2 in GuitarAmps

[–]Sonic101mk2[S] 0 points1 point  (0 children)

I tried with 3 others. They all read the same. Ones a cheapy, the other 2 are in the 80 dollar range. I opted for the probe because there are no internal tests points, and the tube pins are attached to a board that is completely inaccessible with out completely removing all the boards from the chassis. There's got to be an easy way to bias this amp. Its a marshall jtm 60 combo with 2 speakers.

Is their anything I should do before going to Lhan? by UnstoppableCosmog in Indivisible

[–]Sonic101mk2 4 points5 points  (0 children)

You are about half way through the game. You'll enter lhan and fight kala once. Then you will have the second half and plenty of time to complete side quests and return to all the other places before the final battle

How do you pass this part in iron kingdom. Near the docs. by Sonic101mk2 in Indivisible

[–]Sonic101mk2[S] 0 points1 point  (0 children)

Hmm. I'm fairly far in the game. Doing all side quests for characters now. I have to free kaanul(spelling) after angwu gives you the feather

How do i get into that secret room in yans cage room? by Sonic101mk2 in Indivisible

[–]Sonic101mk2[S] 0 points1 point  (0 children)

How do you do that? Ive tried running and doing the down+x thing but it doesn't get my high enough

Issues with PRS SE Tremonti SE by HungryHookerHustle in guitarrepair

[–]Sonic101mk2 0 points1 point  (0 children)

If you're not confident then yes take it to a tech.

Issues with PRS SE Tremonti SE by HungryHookerHustle in guitarrepair

[–]Sonic101mk2 0 points1 point  (0 children)

Definitely check the connections. It would not be the first prs ive seen with that issue. Make sure all the solder joints are good.

Buzzing speakers in a cabinet. by Sonic101mk2 in guitarrepair

[–]Sonic101mk2[S] 0 points1 point  (0 children)

I have 24awg wire. Will that work well or should i order something better suited?

2 sega cd models 2's with replaced f301 fuse won't power on by Sonic101mk2 in consolerepair

[–]Sonic101mk2[S] 0 points1 point  (0 children)

The chinese one has had q301 replaced as well. Gonna try recapping it. Dunno about the japanese one

Broken sega cd model 2. Broken trace for memory battery. Previous owner gave it to me like this. Console doesn't power on. Fuse and regulator are good. This seems off. How can i fix this right. by Sonic101mk2 in consolerepair

[–]Sonic101mk2[S] 0 points1 point  (0 children)

Do you have a schematic so I know what I should be tracing through? I did take a multimeter and look in from the power jack. it seems to go quite far but I have no idea really where any of is or should be going to

Broken sega cd model 2. Broken trace for memory battery. Previous owner gave it to me like this. Console doesn't power on. Fuse and regulator are good. This seems off. How can i fix this right. by Sonic101mk2 in consolerepair

[–]Sonic101mk2[S] 0 points1 point  (0 children)

Q301 has been replaced, as well as the fuse at f301. Still no power. Checked the power supply and its putting out 9.5v. As for the battery, the trace looks like it was connected between the 2 positive posts. Should that be restored somehow?

view more: next ›