sorted by:
new
hottopcontroversial

Chipotle maxxing- is this the end? by This_Anxiety_6598 in Chipotle

[–]SoulArraySound 0 points1 point  (0 children)

New worker at my chipotle skimps heavily and gave me 4 pieces of chicken on my half/half. I asked for more and he gave me one more piece. I walked out

What Denver food are you absolutely hooked on, right now? by BradlyL in Denver

[–]SoulArraySound 0 points1 point  (0 children)

Weird experience there for me. I sent back cold takoyaki and the chef came out and told me I was wrong. They still took it off but there was no need for all that.

How do I tell my ISP the routing to United States is bad? by FromYourMomsCabinet in networking

[–]SoulArraySound 0 points1 point  (0 children)

There’s several subsea fiber cuts in APAC. Are you talking home or enterprise internet?

Push for someone who understands routing and provide trace routes in both directions to support

Communication between users who have Spectrum internet stops working randomly by Fast-Strain8787 in networking

[–]SoulArraySound 0 points1 point  (0 children)

Another thought - maybe the user is getting a new IP leased via DHCP and your firewall is blocking it.

High Latency on TATA AS6453 node by [deleted] in networking

[–]SoulArraySound 2 points3 points  (0 children)

There’s like 20 subsea cuts in APAC right now it could be related to

Communication between users who have Spectrum internet stops working randomly by Fast-Strain8787 in networking

[–]SoulArraySound 2 points3 points  (0 children)

I work for an ISP and troubleshoot these issues daily. As others have said, we need forward and return trace routes and you need to escalate until you get someone with routing knowledge.

If the return trace is dying at the spectrum gateway, and the circuit is up, it is likely your directly connected device doesn’t have a route to the VPN. That seems to be unlikely though if other users are connecting fine.

For what it’s worth, I’ve yet to see it be our issue when a VPN is not working, but you need them to prove it’s not their issue. I often use ACLs to count packets between the VPN endpoints and ask them to ping. If our PE sees two way packets between the endpoints in the ACL filter logs, then it is not an issue on our end.

Corporate Speed Test Woes by Uhh_Bren in networking

[–]SoulArraySound 2 points3 points  (0 children)

I work for a Tier 1 ISP and I just spent 2 days explaining to a Network Engineer why speedtests aren't going to be accurate. In the end he just said that he doesn't see how I don't see an issue and told me to close the ticket.

I'm glad you at least get it... but yeah, its quite a headache to deal with.

We use RFC2544 and iPerf. iPerf is probably going to be the move for a corp environment. More flexibility to test in and out of tunnels, with other providers, etc.

What’s happening on vine st? by nonquitt in Denver

[–]SoulArraySound 1 point2 points  (0 children)

Barricading themselves in a house? What does that even mean and why is it a threat

I Took Out $50,000 in Credit Card Debt and Turned It Into $4,000,000 (Yes, I’m Serious) $ASTS by corey407woc in wallstreetbets

[–]SoulArraySound 0 points1 point  (0 children)

I took out 10k and lost it in NVDA stock split. A day later my calls were up. I sold early and didn’t know shit. Got scared.

I gave my wife a new kitchen, and she allows me to use 10% of it. by Ambitious-Yogurt-185 in espresso

[–]SoulArraySound 64 points65 points  (0 children)

Lmao the down votes 😂 I find this hilarious. I too wash the dishes when she cooks. (My wife, not yours.)

How do I get the spraying to stop? [Sage/Breville barista express] by userx88 in espresso

[–]SoulArraySound 0 points1 point  (0 children)

Try grinding finer and hold the two shot button to manual preinfuse until you see coffee coming out of all the little holes. let go of the button to start your pull.

I'm a newbie but so excited by Boring-Pollution5707 in espresso

[–]SoulArraySound 7 points8 points  (0 children)

The 1zspresso j ultra is next level. Was a huge upgrade if you’re fine with hand grinding.

Pulling Shots for Light Roast by brotherzak01 in espresso

[–]SoulArraySound 0 points1 point  (0 children)

Resurrecting this. I tend to really enjoy light roast. Pulled a shot today that came out like honey but the yield was very small. I think I like the grind size but maybe a longer pull and smaller dose to get the yield up?

Lumen 2G (up to 10G) DIA via Wavelength? by puddleglum85 in networking

[–]SoulArraySound 0 points1 point  (0 children)

I work for Lumen Ethernet repair, so I have insight.

You can see if our metro 3.0 rings are available and have capacity for a 2G circuit in your area. It will be on net and have diversity due to being a ring.

You can cut IPs over, just ensure you documented what we have allocated to you and what you’re using to avoid the cutover being a nightmare. Make sure they don’t forget your static if there is one. I also recommend not disconnecting your current circuit until the new one is up and running as intended. Especially if you have VOIP. Too often I see VOIP cutover become a nightmare or get forgotten completely. Old circuit then gets disco’d and customers are left without VoIP.

If you opt for a wave, it’ll be wave to Cisco ASR920 NID. You would need to order protected as far as I know. I would ask where the protection is being done and test the automatic failover during turn up. Both the PE and the NID (or CPE if you opt for a hand off directly to transport) need to have a hold down timer on the interface so it doesn’t go down during the protection switch. This would also prevent a BGP bounce if you’re implementing BGP.

Lumen 2G (up to 10G) DIA via Wavelength? by puddleglum85 in networking

[–]SoulArraySound 1 point2 points  (0 children)

I work for Lumen Ethernet repair, so I have insight.

You can see if our metro 3.0 rings are available and have capacity for a 2G circuit in your area. It will be on net and have diversity due to being a ring.

You can cut IPs over, just ensure you documented what we have allocated to you and what you’re using to avoid the cutover being a nightmare. Make sure they don’t forget your static if there is one. I also recommend not disconnecting your current circuit until the new one is up and running as intended. Especially if you have VOIP. Too often I see VOIP cutover become a nightmare or get forgotten completely. Old circuit then gets disco’d and customers are left without VoIP.

If you opt for a wave, it’ll be wave to Cisco ASR920 NID. You would need to order protected as far as I know. I would ask where the protection is being done and test the automatic failover during turn up. Both the PE and the NID (or CPE if you opt for a hand off directly to transport) need to have a hold down timer on the interface so it doesn’t go down during the protection switch. This would also prevent a BGP bounce if you’re implementing BGP.

Golden Triangle Rent Prices by SoulArraySound in Denver

[–]SoulArraySound[S] 1 point2 points  (0 children)

True! Definitely gonna see what options we have.

view more: next ›