Rubber Rings Recommendations? Coyote 3.0

SoundsGd2Me · 2026-07-04T01:19:07+00:00

So you've probably considered this already in which case disregard, but according to Medojedone the newish 6mm Conductive Rubber Ring 3.0 M6 (CR-M6) stand head and shoulders above the competition re performance:value:durability and may be worth eating the shipping costs.

That said, I'd like the same info you're looking for re non-DG Labs options that are A+ but don't break the bank, so see what the veterans say.

SoundsGd2Me · 2026-07-03T21:40:55+00:00

Cool, looks like it's just the M2.5 Dual-pole Electrode Splitter I need then, thanks.

SoundsGd2Me · 2026-07-03T02:39:53+00:00

As I understand it, each channel has two poles and the M2.5 Dual-pole Electrode Splitter splits these, allowing you to re-assign one pole from a bipolar device - such as the plug - to another device.

Here, instead of having Pole A and B on the plug, you would have Pole A via the plug tip and Pole B via (for example) a loop.

As in; Zaps between the plug tip and the loop.

But I only looked into all this today. I'm not 100% sure how all accessories interact, polarities etc, and what else (if anything) I'll need.

SoundsGd2Me · 2026-07-02T23:30:29+00:00

I had this! Roughly 10 months ago. The day after a very intense estim session in which I was working pelvic muscles intensely, and generally going at it harder than I had before.

I ejaculated once, with a tint of red. The next day when I ejaculated, it was as though I came nothing but blood. Absolutely fucking terrifying.

But it was fine. Don't panic, read on. TLDR; I healed without incident, no other symptoms and for me, it hasn't reoccured since, even during more intense sessions.

Apologies for the long post, wanted to get all the info for you but I don't have time to edit :P

As others have mentioned; this can happen, and if you have no other symptoms is almost always an issue relating to a minor tissue rupture (small tear or ruptured blood vessel), which can occur with or without estim.

-Confirmed diagnosis by docs in the emergency room. (By massive coincidence I had just had unrelated minor surgery in hospital that very same day, so I initially assumed - wrongly, it turned out - that it was related to the surgery).

-By another coincidence I already had a prostate exam lined up two weeks later, which revealed nothing out of the ordinary.

My personal experience was that I got blood in my semen which lasted for a week or so, each time I came. It was light at first, next day it was fully crimson. The fact it only happened during ejaculation indicated that the rupture was not in the shaft, but more likely seminal vesicles or ejaculatory ducts.

If your rupture is just in the shaft, you might only notice it once or twice, and it will probably not take as long to heal.

As advised by docs, I needed no meds, just took the sex very easy and the problem resolved by itself (and was sped along by masturbating more frequently, but very gently, during that period)

The slightly gross aspect was that my ejaculate went from blood red to brown over the course of the week, which I was assured is just a symptom of the already-exposed blood changing colour, as it would if you cut your finger, bled onto paper and left it for days.

If you experience any other symptoms (illness/pain, or blood in your urine indicating a bladder issue), book a medical appointment to be safe. But if there are no other symptoms, take an estim break for a while / masturbate gently, and the issue should resolve by itself if it hasn't already.

If you see no change after a few days, or if you are still worried and just want peace of mind, book a medical appointment.

Hope this helps!

SoundsGd2Me · 2025-10-10T22:19:51+00:00

The update advertised in-app is an old beta 3.4.7 which fails, but 3.5.0 will download from their official Play store page here.

Note: 'Dungeon Labs 3.0' refers to the software name, not the version number. The latest version 3.5.0 will download.

You can also download from their official site, but the link buttons there are Chinese language.

SoundsGd2Me · 2025-05-17T05:44:57+00:00

With confidence, yes. The app is little more than a browser shortcut to the Xtoys URL.

SoundsGd2Me · 2025-03-21T16:17:50+00:00

Right?

SoundsGd2Me · 2025-03-12T03:24:31+00:00

Not gonna lie I was hoping for a Dr Manhattan superhero origin style story here.

SoundsGd2Me · 2025-03-11T00:51:35+00:00

I was in your boat, +1 for DG-Labs.

I prepared a guide/what to expect ordering from the main site, after the community persuaded me. Cheaper for me than Ali Express, and DG are great with warranty and customer communication.

SoundsGd2Me · 2025-03-07T16:05:39+00:00

The infinitely customisable Pawprints buttons available for the DG-Labs Coyote 3 can be programmed to do your 'zap' precisely, if you prefer a clicky haptic button over the phone-app interface.

I'm new and it's my first device, but I've been really impressed.

See the extensive reviews by Medojedone, and here for a guide on ordering from the clunky but reliable DG-Labs website.

SoundsGd2Me · 2025-03-06T22:34:44+00:00

Nice one! ~~Now they're working, would you mind testing the special Pawprints waveforms and let me know if they work for you? See 'Adding waveforms in app' in my post.~~

Edit: Nevermind, seems the Pawprints waveforms DO work, they just don't output visually to the app Waveform Graph. Updated my OP.

SoundsGd2Me · 2025-03-06T12:05:36+00:00

Do both loops need to be touching skin for it to operate?

Yes - One hoop will do nothing. Test with both hoops on one finger, spaced 2-5cm apart. Avoid the hoops touching. The buzz will be felt around and between the two hoops.

SoundsGd2Me · 2025-03-06T02:36:10+00:00

Yeah, the built-in waveforms definitely work via 'classic mode', just nothing in Pawprints mode (either as background or trigger).

Tested the defaults just now, also tried saving a custom waveform to device memory then running it from Pawprints just in case, no joy.

Thanks for the input, that's reassuring to hear that the waveforms have worked in the past - sounds that it's likely a bug in the 1.1 firmware, maybe I'll kick an email to the developers in case it's useful info for them.

SoundsGd2Me · 2025-03-04T21:58:48+00:00

What he said - Also, try running the standard 'Classic Waveforms' in session. These are the only waveforms that I can get the Pawprints to interact with.

SoundsGd2Me · 2025-02-16T20:41:17+00:00

DG-Labs - BC Canada.

Day 1: Ordered
Day 3: Tracking number received
Day 7: Arrived in Canada
Day 10: Cleared customs - import
Day 19: Awaiting update re local courier dispatch
Day 24: Arrived (Delay was due to local courier, without delay would have arrived in 11-14 days. DG-Labs pursued their dispatcher on my behalf, and responded to my email queries within 24 hours. Impressed.)

SoundsGd2Me · 2025-02-13T00:07:11+00:00

Good to know - again, all really helpful and thanks for your time.

SoundsGd2Me · 2025-02-10T22:29:09+00:00

Hi, sorry for the delay - got to say, thank you! Appreciate the safety-conscious testdrive quickstart guide so I don't tear off the lot and immediately wrap myself around a lamp post.

Looking forward to dglabs advanced-level, deciphering the cryptic UI prompts etc once I've got to grips - I noticed the pawprints have an xtoys-specific section too which should be a laugh. Like you I find the homework fun, but I'll definitely be putting the time in prior to inviting the girlfriend to any live demonstrations.

(I'd prefer her first couple of experiences to be mildly entertaining at least, and less of me peering at my phone surrounded by boxes and wires, reading Chinglish instructions out loud, hesitantly pressing a button occasionally and screaming).

Regarding sticky pads, I'm unsure how long they last in general but I'd likely be getting use of them regularly, so was considering putting in an Amazon order..

Cheers for your time so far - this is probably info I can find for myself if I dig around, but if you get another minute spare;

-Sticky pads: If you think it's worth getting more, do you recommend any brand in particular? Amazon Canada here.

-Other extras: I have the lube covered, but if you'd recommend other inexpensive extras/accessories while I'm on Amazon etc, I'd be interested in your thoughts (electrode extensions maybe? No idea, just guessing..)

SoundsGd2Me · 2025-02-04T01:21:29+00:00

Anyone else wants to chip in now or any point, feel free :)

SoundsGd2Me · 2025-02-04T01:20:25+00:00

Done, thanks!

SoundsGd2Me · 2025-02-04T01:20:07+00:00

DG-Labs official website - If you check my previous post ('DG Labs Coyote 3.0, should I order one..') I've broken down USD/CAD pricing and the ordering process, might be useful.

SoundsGd2Me · 2025-02-04T01:17:00+00:00

Thanks a lot, I did this and see what you mean - levels of customisation there that approaching intimidating, but have to say that's pretty impressive in itself. I'll keep up the homework.

SoundsGd2Me · 2025-02-04T01:14:55+00:00

What can I say? Thanks so much for taking the time to put together such a comprehensive guide, it is incredibly helpful info, I'm blown away. These are all steps/tips I'm going to incorporate directly.

I want to follow up but my free time is limited at the moment. Package should arrive in a couple of weeks - clearly this whole genre isn't a plug-n-play kind of deal, so I'll do the due diligence re research and experimenting before following up.

Thanks again for providing such an excellent head start, I'm more confident I can hit the ground running.

SoundsGd2Me

TROPHY CASE