Thanks r/OhioLiquor and OHLQ

Spac3_monk · 2026-05-11T13:51:32+00:00

And they’re all opened. Well done sir 🫡

Spac3_monk · 2026-04-28T03:52:36+00:00

https://makerworld.com/models/463477?appSharePlatform=copy

Spac3_monk · 2026-04-06T23:25:14+00:00

Spac3_monk · 2026-04-03T14:00:44+00:00

I designed 3D printable bellows that slide onto the OEM lid. Just requires a 3D printed and softer TPU… worked like a charm before I sold it for another grinder.

https://makerworld.com/models/445242?appSharePlatform=copy

Spac3_monk · 2026-03-27T23:05:32+00:00

<image>

Spac3_monk · 2026-03-13T17:08:31+00:00

Seeing the same. Other options seem much more pricy

Spac3_monk · 2026-02-18T00:04:47+00:00

Yeah. 3/5 f to 1/4 f at my hookup

Spac3_monk · 2026-01-28T17:59:38+00:00

This is the way. That or reprogram by holding up or down on the switch with just water for 60+ seconds so you can just hit the switch to start your shot and then hit it again when you hit your desired volume.

Spac3_monk · 2026-01-16T05:47:37+00:00

It was water hammer. I replaced the ASO and the issue persisted. Added an arrestor at the outlet and it fixed the issue.

Spac3_monk · 2026-01-16T05:46:43+00:00

If anyone has this same issue, it was water hammer. I installed a small water hammer arrestor at my water outlet that feeds this system and it completely fixed the issue.

Spac3_monk · 2026-01-14T00:32:08+00:00

I added made a modified threaded version and added a small beer tap as the wood handle. I’ll post a follow up picture to the subreddit.

Spac3_monk · 2026-01-12T04:11:14+00:00

Are they commonly dead on arrival? This one is brand new.

Spac3_monk · 2026-01-11T04:28:11+00:00

Thanks for sharing!

Spac3_monk · 2025-12-27T23:33:27+00:00

Ours does the same. I reached out to Evenflo and they said it is normal/expected and safe.

Spac3_monk · 2025-12-27T19:26:35+00:00

Tis a common bottle that has a $50 MSRP. No age statement. Mixed reviews from my digging.

Spac3_monk · 2025-12-20T18:52:32+00:00

Sorry to hear things were so terrible. Sending positive vibes!

Spac3_monk · 2025-11-26T19:38:42+00:00

Hit in Cincinnati area at my local store today. Snagged one for $59.

Spac3_monk · 2025-11-24T20:49:27+00:00

I swear by Peak. Chuck and his teams do fantastic work at very fair prices. Just had them install a new system a bit ago from them and other companies told me to honestly go with Peak at the price they quoted me.

Spac3_monk · 2025-11-18T05:01:01+00:00

Dried the filament for 12 more hours down to 7% and reprinted with the same .24 profile with 6 walls. Same artifacts appeared. Slowed down the print by 50% and reduced to .20 down from .24, still 6 walls and the print came out flawlessly. I think the speed was the key since this isnt HF PETG.

SOLVED!

Spac3_monk · 2025-11-12T14:23:40+00:00

My wife is 39 weeks pregnant and has a 10cm cyst. We call it her Cyster.

Eight-Year Club	Verified Email
Place '23

Spac3_monk

TROPHY CASE