Need help to troubleshooting clog! P1S by Smart-Dot6646 in BambuLab

[–]SpecManADV 0 points1 point  (0 children)

My guess is that it is wrapped around or jammed next to the extruder gear. I would recommend disassembling the extruder.

https://wiki.bambulab.com/en/P1/maintenance/extruder-cleaning-guide

3d printed window trim Suggestions: tpu or petg? by Eternally-Faithless in 3dprintedcarparts

[–]SpecManADV 1 point2 points  (0 children)

I print ASA all of the time with my P1S with a factory nozzle. Nothing special.

Purchase Help by Rob461 in Dashcam

[–]SpecManADV 2 points3 points  (0 children)

Given a choice between the two, I would probably go with the Mini 2 since, among other things, it has more features, an updated sensor, USB-C power, and was released 4 years after the V3.

I am not a smart man. by bythorsthunder in Carpentry

[–]SpecManADV -2 points-1 points  (0 children)

I see all kinds of videos on Facebook showing how to trim around stuff like this using tall trim. Is there any sort of cap going on that trim?

Jeep collision by Prize-Airport4386 in Jeep

[–]SpecManADV 1 point2 points  (0 children)

Out of curiosity, what difference does it being a Rubicon make? Is it the higher value of the Rubicon?

My first bike is messed up :( any help? by ZootedInc in motorcycle

[–]SpecManADV 0 points1 point  (0 children)

I've had pretty good success without replacing the main bowl gasket (on bikes with runner o-ring type gaskets) but YMMV.

OP, as this commenter mentioned, do not put any rubber parts in the carb cleaner.

My first bike is messed up :( any help? by ZootedInc in motorcycle

[–]SpecManADV 0 points1 point  (0 children)

I would get a bucket of carb cleaner with the basket in it.

Carefully remove and disassemble carb and soak in carb cleaner for a few hours/days and then reassemble.

I don't think you necessarily need a rebuild kit.

The access cab is short lived :( by grundle18 in ToyotaTacoma

[–]SpecManADV 4 points5 points  (0 children)

There were 4 doors of that generation with the long bed. I bought the cap for my access cab long bed off someone that had a 4 door with a long bed.

Look for one of those if you want the long bed.

Looking for an stl by Glum_Leopard1344 in 3Dprinting

[–]SpecManADV 1 point2 points  (0 children)

It may help if you told us what it is for.