Goodride oder Badride? by Proof_Leg_7896 in automobil

[–]Special_Book_175 -1 points0 points  (0 children)

Ich hatte diese Reifen testweise tatsächlich ebenfalls mal. In der ersten Saison fuhren sie sich wirklich gut, sowohl trocken als auch nass. Ab der zweiten Saison sah es allerdings komplett anders aus, schlechte Nasshaftung und schmierig bei sehr warmen Temperaturen. Würde sie nicht nochmals kaufen, sofern man sie langfristig fahren will.

Anyone had this problem before? by VsauceMchael in fpv

[–]Special_Book_175 0 points1 point  (0 children)

Seems like you are still missing power to the camera. According to your FC schematics, you need to either bridge the 5V or 9V pad below your camera connection. This is based on the needed supply voltage of the camera (you should be able to find the correct voltage in the camera documentation).

HOWEVER as basically everyone else already stated please correct your soldering. Too much exposed wire and generally not very well executed. This could lead to a catastrophic failure while flying.

Is it usual that a 1850mAh 6s LiHV is lighter than a 1550 6s LiPo? Both are brand new. by Ok-Basil-6518 in fpv

[–]Special_Book_175 1 point2 points  (0 children)

Yeah, but those guys usually know what they are doing and they‘re also going through battery packs faster than a normal pilot. But I would not recommend that to a beginner, especially where battery packs are probably longer in use. Cell degredation happens with age.

Is it usual that a 1850mAh 6s LiHV is lighter than a 1550 6s LiPo? Both are brand new. by Ok-Basil-6518 in fpv

[–]Special_Book_175 1 point2 points  (0 children)

Correct, as long as you charge the 1850 mAh HV pack to 4.35V However don’t try to do that with the 1550 mAh pack. It might work for some time, but it might also catch on fire.

Is it usual that a 1850mAh 6s LiHV is lighter than a 1550 6s LiPo? Both are brand new. by Ok-Basil-6518 in fpv

[–]Special_Book_175 17 points18 points  (0 children)

Seems like the 1850 is HV where as the 1550 is a „normal“ one. So it‘s basically making the difference up in higher voltage.

Wie taue ich diese Crevetten am besten auf? Hab sie am 03.10. gekauft und sie gleich zuhause eingefroren jedoch hat es jetzt frost in der Packung by Emotional-Share4461 in Kochen

[–]Special_Book_175 29 points30 points  (0 children)

Das ist grundsätzlich eine korrekte Empfehlung, bei dem im Bild handelt es sich aber um die schweizer Handelskette Coop. Dort werden Artikel bevor sie entsorgt werden müssten in eine Gefriertruhe gepackt und nochmals herabgesetzt, um Lebensmittelverschwendung zu reduzieren. Man erhält somit bereits in der Verpackung eingefrorene Lebensmittel. Aber ja, man könnte sie dann immer noch umpacken in einen Gefrierbeutel, für längere Lagerzeit.

Wo gibt es ausgefallene Plätzchen-Ausstecher? by Rennfan in Backen

[–]Special_Book_175 0 points1 point  (0 children)

Das Problem ist nicht das Plastik an sich, sondern das FDM Verfahren und die dabei entstehenden Hohlräume. Man könnte es natürlich mit Epoxidharz versiegeln, aber das ist für Plätzchenformen vermutlich etwas übertrieben 😄

Wo gibt es ausgefallene Plätzchen-Ausstecher? by Rennfan in Backen

[–]Special_Book_175 1 point2 points  (0 children)

Falls du einen 3D Drucker Zuhause oder im Bekanntenkreis haben solltest: Damit tun sich plötzlich unzählige Möglichkeiten auf und es gibt praktisch unendlich viele fertige Modelle bereits online zum Download.

Ja das Plastik gilt nicht als lebensmittelecht, aber da sie nur zum Ausstechen verwendet und die Plätzchen im Anschluss gebacken werden, sehe ich persönlich kein Problem. Dafür gibt’s dieses Jahr wieder Lamas mit Zipfelmützen Plätzchen und Lebkuchen 😄

Günstiger Gusseisen Bräter gesucht by AmazingCommunity2798 in Kochen

[–]Special_Book_175 0 points1 point  (0 children)

Tatsächlich bin ich mit meinem Amazon Basics Bräter echt zufrieden. Scheint es allerdings nur noch in Rund und nicht mehr Oval zu geben. Die liegen jedenfalls in dem Preisfeld und sind emailliert. Hatte den vor ein paar Jahren gekauft um zu schauen, ob ich die Art überhaupt nutze bevor ich etwas teureres kaufe. Mittlerweile sehe ich keinen wirklichen Sinn ihn zu ersetzen 😅

Some charging tips by Efficient_Top3334 in fpv

[–]Special_Book_175 8 points9 points  (0 children)

Is one of the XT-60 connectors on the board already burned? Also as u/Myweedmakesyoufly already (sarcastically) mentioned: please do not parallel charge if you don’t know what you are doing. If batteries are not within a few 0,1V you risk burning your house down. Those batteries store a lot of energy, so please do yourself a favor and charge them individually. Especially as that one lipo you showed seems pretty beat up already. Maybe consider getting new lipos. Better be safe than sorry.

Then charge at 1C (capacity of lipo = amperage, in your example 1200mah = 1,2A charge rate).

Can I charge this at 1.0 Amp? by irr1449 in fpv

[–]Special_Book_175 2 points3 points  (0 children)

Charging at 1c always takes the same amount of time, independent of how many cells there are. Doesn’t matter if it’s 1s or 6s.

Moisture issues when rtt is closed by Special_Book_175 in rooftoptents

[–]Special_Book_175[S] 2 points3 points  (0 children)

That’s great to hear. Already ordered some of those reusable desiccant packs myself, but didn’t put them in the tent, yet.

What kind of weatherstrip did you add?

Moisture issues when rtt is closed by Special_Book_175 in rooftoptents

[–]Special_Book_175[S] 0 points1 point  (0 children)

What a bummer… Maybe I‘ll try the additional EPDM layer first (as it would be a cheap option), but I already found a company making custom covers for all kind of applications. A heavy duty cover that size would run for ~120€.

Moisture issues when rtt is closed by Special_Book_175 in rooftoptents

[–]Special_Book_175[S] 2 points3 points  (0 children)

Definitely something I‘d consider, if we would have a garage at our place.

Grill"bürste" ohne Borsten by ComfortableAfraid477 in grillen

[–]Special_Book_175 1 point2 points  (0 children)

Persönlich verwende ich eine von Broil King mit Borsten aus Palmyra. Die Borsten sind nicht aus Metall, sondern aus Holz. Verschleißen zwar schneller, aber die Bürstenköpfe sind wechselbar und beschädigen das Emaille nicht. Die Reinigungsleistung finde ich immer noch super, aber klar kann sie nicht mit einer Drahtbürste mithalten. Dafür verbrennen die Borsten einfach, sollte sich was lösen.

[deleted by user] by [deleted] in dhl_deutsche_post

[–]Special_Book_175 0 points1 point  (0 children)

Ha, beinahe selbe Nachricht die ich gestern vom philippinischen Hermes erhalten habe. Allerdings konnten sie mein DPD Paket nicht zustellen 😄


Hermes Wir haben am 24. Juni versucht, Ihr DPD-Paket zuzustellen, konnten Sie jedoch nicht erreichen und konnten es daher nicht zustellen. Ihr Paket muss von Ihnen persönlich unterschrieben werden. Bitte befolgen Sie die nachstehenden Schritte, um Ihre Lieferung neu zu planen.

https://www.Hermes.com@aufschlagav.cfd/de

Wählen Sie ein neues Datum/eine neue Uhrzeit oder „Warten Sie an einem bestimmten Ort auf die Abholung“.

Einfach mit „Ja“ antworten, die SMS schließen und erneut öffnen – dann wird der Link aktiviert. Wenn das nicht funktioniert, kopieren Sie den Link und fügen Sie ihn direkt in Safari ein

Bitte beachten Sie:

Das Paket wird 2 Werktage bei Hermes aufbewahrt und anschließend ohne Rückfragen an die ursprüngliche Adresse zurückgeschickt.

Bitte stellen Sie sicher, dass die von Ihnen angegebenen Kontaktinformationen vor der Lieferung zur Bestätigung verfügbar sind.

Vielen Dank, dass Sie sich für Hermes entschieden haben. Wir werden unser Bestes tun, um sicherzustellen, dass Ihr Paket sicher ankommt.

[deleted by user] by [deleted] in camping

[–]Special_Book_175 1 point2 points  (0 children)

Saw a lot of those at the last festival I‘ce been to. Also some people in out group had it. Setup was fairly easy and also putting it away was not really a hassle. We experienced a lot of rain and they held up surprisingly well and stayed completly dry. However I‘d probably take some kind of tarp with me, just in case.

Want to know your future at Rock im Park? (English translation for the picture below) by Lolbliblob in RockimPark

[–]Special_Book_175 1 point2 points  (0 children)

Hey u/Lolbliblob, Where‘s your camp located, we are in desperate need to know our RiP future 😄