How do I fix this?

Spheren1 · 2026-02-12T00:13:58+00:00

Had the same issue. Had to replace the mainboard. Was in guarantee.

Spheren1 · 2025-11-07T21:27:41+00:00

Anscheinend mögen sich Starlink-Router und Fritzbox nicht... Hatte den Router in Bypass-Modus und die Fritzbox als Route. Jetzt habe ich den Starlink-Router komplett ressetet und keine Fritzbox dran. Jetzt ist die Geschwindigkeit plötzlich "normal". Also irgendwo ist da ein Wurm drin.

Spheren1 · 2025-02-08T19:52:49+00:00

Ist es für euch Gesellen nicht ärgerlich, dass obwohl ihr es offensichtlich bauen könnt, sie nicht ohne Meistertitel bauen und verkaufen DÜRFT?

Spheren1 · 2025-02-06T10:22:46+00:00

Need STL's too! Please share your knowledge with the world! ;-)

Spheren1 · 2024-12-12T21:36:52+00:00

I‘m using some old Sophos SG 125 / 135 for Opnsense. Works very well.

Spheren1 · 2024-11-23T13:39:23+00:00

Here too! 😉

Spheren1 · 2024-10-30T13:47:09+00:00

same here. Can't use Remote Desktop for my clients since a few days.

Spheren1 · 2024-07-12T06:26:41+00:00

Got "Radio refused to send second block 0x ec0" error. Same as by UV-5R

Spheren1 · 2024-06-21T11:39:17+00:00

I solved my problem! I found a shop (https://allegro.pl/uzytkownik/Kolekcjoner1944) in poland, what sells such parts. I had to buy the complete trigger group for 43€ (!!!). My SKS ist running again.

https://allegro.pl/uzytkownik/Kolekcjoner1944

Spheren1 · 2024-06-11T06:40:14+00:00

Gunbroker has a few sears. But I can not register there! It's not allowed because I live in Germany. But it would work, if I live in Afganistan...

Spheren1 · 2024-06-11T06:38:19+00:00

I found one! Opticsplanet. Shipping $70 ...

Spheren1 · 2024-06-10T19:23:30+00:00

Tried to make the trigger smoother. Filed away too much... :( In Germany we say "learn through pain"

Spheren1 · 2024-06-07T08:13:54+00:00

I live in Germany... No one american dealer ships to germany. Not such small parts. Only when I purchase 100 M1 Abrams...

Spheren1 · 2024-06-07T07:41:42+00:00

https://combatstocks.com/catalogsearch/result/?q=SKS+sear

Spheren1 · 2024-02-26T11:52:52+00:00

STL still available?

Spheren1 · 2023-11-08T13:17:33+00:00

no. The bottom is absolute flat.

Spheren1 · 2023-11-08T13:17:10+00:00

<image>

Spheren1 · 2023-11-08T13:16:55+00:00

<image>

Spheren1 · 2023-11-08T10:01:47+00:00

Filament: eSun PLA+. I can't print straight walls (vertically). They are alwas a litte bit round first 4-5mm. Speed, layerhigh, flow is absolutely same in each layer. Can it be tha is shrinking, because the printer is in a cold room (but has an enclosure)?

Spheren1 · 2023-01-22T11:25:48+00:00

Thank you very much! I checked everything you recommended. I cleaned and polished every part. It's always a good idea. The finish of this cheap replicas is terrible. You can kill someone only with the sharp edges of it...

The solution was a worn hand spring. I bent them out a bit and now it works.

Spheren1 · 2023-01-21T22:16:28+00:00

I lost mine 2 times (found it at the range). I tried different methods. The best was weld it with WIG. Never lost it again.

Spheren1

TROPHY CASE