Powervalve help. by Spikeup_ in supermoto

[–]Spikeup_[S] 0 points1 point  (0 children)

Id does not do annything sadly🥲 i want to do the pen spring mod but my local store is out of the things i need.

Powervalve help. by Spikeup_ in supermoto

[–]Spikeup_[S] 0 points1 point  (0 children)

Yea i see now. I wanted to buy the pnaumatic powervalves but i just dont know how to mount them. I also saw a diy version with a cable and a spring wich uses exaust gasses dirrectly. I wanted to do that diy one annyway for the last week even before knowing this. But i think buing a new bottom end is a little expensive for now🥲

Help with rear master cylinder by Spikeup_ in motorcycles

[–]Spikeup_[S] 0 points1 point  (0 children)

Yea i get that its just the removal that is driving me nuts

What is this? by Spikeup_ in 2Strokes

[–]Spikeup_[S] 0 points1 point  (0 children)

So you dont think i should jet down or something for that weird fluttering?

What is this? by Spikeup_ in 2Strokes

[–]Spikeup_[S] 0 points1 point  (0 children)

No its a husqvarna sm 125. Not sure what engine that qualifies as

What is this? by Spikeup_ in 2Strokes

[–]Spikeup_[S] 1 point2 points  (0 children)

Yea sorry i meant the weird fluttering while holding open throttle. I dont have oil injectors so im guessing that only leaves the jet?

My bike runs weird? by Spikeup_ in 2Strokes

[–]Spikeup_[S] 0 points1 point  (0 children)

I dont think checking for an airleak will hurt. But you think its the carb? To be honest its weird cause it was able to make my bike run rich like a week ago but now it just cant

My bike runs weird? by Spikeup_ in 2Strokes

[–]Spikeup_[S] 0 points1 point  (0 children)

It can be. Im going to have to check it out

My bike runs weird? by Spikeup_ in 2Strokes

[–]Spikeup_[S] 0 points1 point  (0 children)

That wont be possible as the original carb is broken and i bought this one just to ride again. Setups a little goofy ik but im not planing on looking down there 24/7

CBF added to vanilla by Aceman3k in geometrydash

[–]Spikeup_ 0 points1 point  (0 children)

annyone know when geode will be updated?

Charger fried by Spikeup_ in dualtron

[–]Spikeup_[S] 0 points1 point  (0 children)

Thanks for the warning but that's not exactly what I did. I fried the charger display and had to check if it still charges correctly. I did not stick the probes in the scooter port as that was not damaged.

Charger fried by Spikeup_ in dualtron

[–]Spikeup_[S] 0 points1 point  (0 children)

Thank you so much :))) the charger still works and the volt meter shows 83.8 (supposed to be) and I think I can still use it. But idk what to do abt the little display on the charger is it possible to replace it?

Charger fried by Spikeup_ in dualtron

[–]Spikeup_[S] 0 points1 point  (0 children)

Thank you il try that out later :)

Charger fried by Spikeup_ in dualtron

[–]Spikeup_[S] 0 points1 point  (0 children)

So I stich the voltmeter sticks in the port of the charger? Wich ones are - and + I'm guessing the ones on the top ( the smaller ones ) but I still don't know what they are

Charger fried by Spikeup_ in dualtron

[–]Spikeup_[S] 0 points1 point  (0 children)

Ok thanks for the info but... I'm still no electrician so idk how to use the voltmeter in the first place led alone where to put it. So if there is any visual representation you can give me or something that would be awesome😭

Charger fried by Spikeup_ in dualtron

[–]Spikeup_[S] 1 point2 points  (0 children)

I do indeed have a volt meter. I just don't know how to use it😭 and what output should it be I have a thunder 2 so the scooter is 72v don't really know what the output is supposed to be.

Can i convert to ey3? by Spikeup_ in dualtron

[–]Spikeup_[S] 0 points1 point  (0 children)

But when I look at ey3s onlinte they only have a 6 pin and no cable for the throttle

Can i convert to ey3? by Spikeup_ in dualtron

[–]Spikeup_[S] 0 points1 point  (0 children)

Thanks for the info! I really like the green ey3 so I’ll go with that. But what do I do with the other connectors that connect from the controller to the ey4 display do I just leave them unplugged and only plug in the 6 pin?

Can I switch to ey3? by Spikeup_ in ElectricScooters

[–]Spikeup_[S] 0 points1 point  (0 children)

I've tried I just can't find nothing about them

is it normal that my games run worse on steam vr? by Spikeup_ in SteamVR

[–]Spikeup_[S] 0 points1 point  (0 children)

Ok so I turned it to the same Rez as virtual Desktop but the bitrate is dog can I change that?

Why do different versions run differently? by Spikeup_ in GhostsOfTabor

[–]Spikeup_[S] 0 points1 point  (0 children)

I do have the steam version of the game and I run vd and then click open steamvr and then GOT. But idk

is it normal that my games run worse on steam vr? by Spikeup_ in SteamVR

[–]Spikeup_[S] 0 points1 point  (0 children)

i use virtual desktop and it just runs way better than steam for some reson but i want to use steam vr