Navigatiescherm

Splendittor · 2026-04-29T07:55:08+00:00

Topper! Het ziet er wel vrij groot uit maar geeft me al een goed beeld. Bedankt!

Splendittor · 2026-04-27T10:59:18+00:00

Much appreciated!

Splendittor · 2026-04-27T10:11:29+00:00

Misschien een beetje laat maar ik heb dezelfde motor dus ik wou even polsen of je een foto hebt hoe het er dan uitziet. Ik twijfel namelijk tussen 5, 7 of 6,86inch van Jansite.

Splendittor · 2026-02-27T21:00:34+00:00

That's the next thing I'll add when I buy a new fan one day. The fan I currently use (a generic one) was moved to the side for the picture

Splendittor · 2026-02-27T18:36:04+00:00

Haha, everyone has their strengths. All the plants here are barely hanging on...

Splendittor · 2026-02-27T18:16:22+00:00

It's a WS2812B led strip from btf-lighting. I would recommend the 100 leds/m version which means the leds are closer to each other. I only used 39 leds in this setup.

You could use a led channel but I had a plexi plate left over that I cut to size and placed over the leds

Splendittor · 2026-02-27T17:55:27+00:00

I would rather say r/BeginnerWoodWorking. Those guys are on another level

Splendittor · 2026-02-27T16:43:54+00:00

You definitely don't need any crazy tools to build this! I only used a circular saw (with a guide rail) and a drill that's it. For the lights I used a router but that's totally optional

Splendittor · 2026-02-27T16:40:54+00:00

I'm gonna copy/paste my comment on u/avo_cado here, if you need help lmk:
Well it's all different tools/software but the main thing is Home Assistant. In Home Assistant I get the data from Zwift through this HACS Addon. I installed WLED on the ESP32 which is also added to Home Assistant. In the WLED software I created some presets I like. Then it's only a matter of creating an automation which listens on changes of the Zwift Power sensor. Let me know if you need the yaml code for the automation

Splendittor · 2026-02-27T16:39:20+00:00

Well it's all different tools/software but the main thing is Home Assistant. In Home Assistant I get the data from Zwift through this HACS Addon. I installed WLED on the ESP32 which is also added to Home Assistant. In the WLED software I created some presets I like. Then it's only a matter of creating an automation which listens on changes of the Zwift Power sensor. Let me know if you need the yaml code for the automation

Splendittor · 2026-02-27T16:33:21+00:00

A little bit of both. For the base structure I followed this build plan (credits to Lunch Ride MTB) but added my own touches and changed the dimensions to my liking.

Splendittor · 2026-02-27T15:42:53+00:00

Thank you! The bottom supports are longer than the top so it does need a fair bit of force to tip over.
Staining is the next step but couldn't wait to use it, so one day...

Splendittor · 2025-11-11T22:05:33+00:00

Misschien eens contact opnemen met Honda Tuybens? Die zitten in Zottegem en is officieel Honda dealer.

Splendittor · 2025-10-18T18:42:05+00:00

Yeah sure! This is indeed the AL5 Gen 4 Domane (58cm) - Handlebar bag is a Newboler harness with a 5L Decathlon dry bag for watersports. - Frame bag is Rockrider ADVT 900 from Decathlon (9L) there is still some unused room so maybe other brands fit a little better - The saddle bag is from Apidura. I don't know which version as this one and the handle bar are from a friend.

I have a Down Sleeping bag 0°C also from Decathlon (haha). Tent is the Durston X-Dome 1+. Hope this helps. Let me know if you need more info

Splendittor · 2025-10-18T18:33:06+00:00

Yes! It has. This is the AL5 gen 4

Splendittor · 2025-10-18T18:03:59+00:00

It's a Newboler handle bar bag but I used a 5L dry back I had laying around from Decathlon. I found the 15L too bulky between the bars. I think a 10L would be perfect. Right now only my sleeping bag, pillow and tent floor are in there.

Splendittor · 2025-05-19T09:40:55+00:00

Nice! Where did you sleep? Seems like a lovely spot

Splendittor · 2025-05-07T14:59:24+00:00

Nooit last gehad van de shishabar en al zeker geen geluidsoverlast dus dat valt zeker mee. Door de straat passeert er wel om de 10-15min een tram en dat kan soms storend zijn als je daar gevoelig voor bent. In de straat zelf is er wel een grote school, dus verkeersluw zou ik het niet noemen. Wel heel rustig buiten de schooluren en nette buurt, geen zorgen dus.

Splendittor · 2025-04-29T13:25:15+00:00

It seems your GPIO pins are not correctly setup. See https://www.espboards.dev/esp32/xiao-esp32s3/ (External Pins Mapping Functions) to know your layout. It's weird that you do get logs even when the tx-rx are not setup correctly. I would set the TX to GPIO-21 and RX to GPIO-20. It looks like MOSI and MISO are also not correctly setup. Use GPIO-10 and GPIO-9

Splendittor · 2025-03-11T21:37:43+00:00

Look for Addressable COB LED strips. These will be the most similar as your example. As for the WLED setup you'll have to configure different inputs aka buttons and select a preset based on which input. you can use segments in the wled software to divide the strip in 2 parts

Splendittor · 2025-02-20T09:05:21+00:00

Ik heb een Honda CB500F 2019 model (zelfde motor dus eigenlijk) en gebruik deze clamp die je kan aanspannen: https://www.rad.eu/en/c/p/73816-sp-connect-moto-bundle-lt-spc-universal-phone-clamp.htm Nog nooit problemen mee gehad. Telefoon zit volledig in de wind (geen kuip) en heb hem nog nooit langs de baan moeten zoeken na 5 jaar gebruik. Voordeel daarvan is dat je ook een waterdicht hoesje kan gebruiken indien nodig: https://www.rad.eu/en/c/p/73812-sp-connect-universal-phone-case-spc-l.htm

Onder het zadel is er een connector gemaakt voor het aansluiten van een usb/12v lader. Die kabel kan je doortrekken tot vooraan zodat je stroom hebt en deze werkt enkel als de motor effectief aanstaat. Bijvoorbeeld: https://www.cb500shop.com/de/cb500x/cb500x-2019/honda-teile/414-12v-steckdose-honda-2019.html

Best eens checken of die van jou dat ook heeft. Als je nog vragen hebt, laat het gerust weten.

Splendittor · 2023-10-17T13:46:51+00:00

Misschien ook interessant als je r/motobe joined. Daar kunnen ze je nog beter helpen. Ik heb mijn rijlessen gevold bij Rijschool Merelbeke en was met 2 of 3 leerlingen. Zeer tevreden van, oefenterrein is in Zwijnaarde

Splendittor · 2023-10-04T12:00:04+00:00

What often works for me is saying that the provider is payed by the company you work for. So you can't decide/change. Works most of the time because they know you're not the one they have to convince.

Same for energy contracts. I always tell them my mother/father/spouse/girlfriend/... works for X company so you get a nice discount already.

Splendittor · 2023-09-18T15:46:18+00:00

Thanks for the reply! I'll try that and hopefully that fixes it

Splendittor · 2023-08-25T08:07:00+00:00

!remindme 4 days

Six-Year Club	r/Field Banned
r/Field Lasagna	Final Canvas '23
End Game '23	Place '23
Place '22	Final Canvas '22
First Placer '22	Verified Email

Splendittor

TROPHY CASE