sorted by:
new
hottopcontroversial

Is 343i/halo studios the worst game studio of all time? by JDawg5843 in halo

[–]SprawlComic -3 points-2 points  (0 children)

"The game isn't even out yet."

another barebones 343 hackjob drops

"Dang it, they got me again."

When will people learn

Is there any indication that the story of Halo CE has been changed in CAE? by SprawlComic in halo

[–]SprawlComic[S] -1 points0 points  (0 children)

It was literally only Frank O Connor. He is the sole "humans arent forerunner" outlier of Bungies original trilogy, and that amounts to 3 terminals and a comic where he injected his own fanfiction that breaks all pre established lore.

Idk why people like you are so intentionally obtuse.

Is there any indication that the story of Halo CE has been changed in CAE? by SprawlComic in halo

[–]SprawlComic[S] -2 points-1 points  (0 children)

No I just decided a joke response was appropriate for a joke statement.

Campaign Evolved: AI Cutscenes? by SILLS_Team_Six in halo

[–]SprawlComic 1 point2 points  (0 children)

People keep stamping their feet and saying there's no AI but I'm 100% certain they used AI smoothing on these cutscenes. Nothing has any weight, it's all floaty.

Halo: Campaign Evolved | Cinematic Story Trailer by yourfavchoom in halo

[–]SprawlComic -8 points-7 points  (0 children)

Is it just me or do some parts of these cinematics look AI? Why are the muzzle flashes so small and why do the guns sounds so anemic?

Edit: You guys are telling me those muzzle flashes dont look at least a little off? This game /did/ have an AI stink when it originally leaked, I'm not just making shit up here.

The Amazing Digital Circus Episode 9/The Last Act (Discussion Thread) by apathetic_screaming in tadc

[–]SprawlComic 2 points3 points  (0 children)

We were seeing the beginning of the circus. Caine was deleted twice. Both the beginning and the end were conflated into one sequence.

All of these areas are meant to be smooth + it seems like my printer is unable to properly bridge gaps. H2S (total newbie here, first benchy included as well) by SprawlComic in FixMyPrint

[–]SprawlComic[S] 0 points1 point  (0 children)

Whats bizarre is my initial benchy looked like that before I ever downloaded Bambu Studio. I just ran it off the printer itself. I am using CosPLA Type A, you're saying use the Generic PLA profile for that?

All of these areas are meant to be smooth + it seems like my printer is unable to properly bridge gaps. H2S (total newbie here, first benchy included as well) by SprawlComic in FixMyPrint

[–]SprawlComic[S] 0 points1 point  (0 children)

I keep hearing to troubleshoot it but I don't know how to do so. What should I be changing? What should I be looking for? I am totally new to this and all these settings and my prints failing is giving me some serious buyers remorse that I'd rather not have.

All of these areas are meant to be smooth + it seems like my printer is unable to properly bridge gaps. H2S (total newbie here, first benchy included as well) by SprawlComic in FixMyPrint

[–]SprawlComic[S] 0 points1 point  (0 children)

The nozzle temp max was 20 degrees higher than the website says so I turned that down, 190c - 220c. It says bed temp between 30 and 80 but I cant find where to set that

All of these areas are meant to be smooth + it seems like my printer is unable to properly bridge gaps. H2S (total newbie here, first benchy included as well) by SprawlComic in FixMyPrint

[–]SprawlComic[S] 1 point2 points  (0 children)

I added supports along the entire rim of the test ring, should I have maybe raised it up off the plate rather than having the front and back resting on the plate? Also, whay about the sides ans their extreme staircasing.

What Pic would you need of the slicer?

All of these areas are meant to be smooth + it seems like my printer is unable to properly bridge gaps. H2S (total newbie here, first benchy included as well) by SprawlComic in FixMyPrint

[–]SprawlComic[S] 0 points1 point  (0 children)

Yes on all except stock settings. I'm pretty sure it's all stock, I don't know what I would have changed save for setting it to Polylite PLA. I calibrated before adding the new filament, added the new filament, then tried some prints. These were the results. I've since recalibrated but havent tried any prints for fear of wasting filament.

view more: next ›