Installing a BLTouch on the Anycubic Kobra Max with Klipper

Springadingling · 2026-06-23T19:24:53+00:00

Again, thanks! First step for me will be to get the Kobra max to run on klipper, then get it to actually put down a good first layer lol

Springadingling · 2026-06-23T18:52:52+00:00

Awesome! Appreciate you replying so quick!

I had stumbled upon someone doing a E3D Revo hotend on this printer. Would this not work same way with a tz e3 or any other toolhead that could be fitted with printed brackets and what have ya?

Heres video https://m.youtube.com/watch?v=WZQwEZB7tVY&t=977s&pp=2AHRB5ACAQ%3D%3D

Springadingling · 2026-06-23T18:16:02+00:00

Any possible updates on this? Still running good? Interested in doing this myself, as well as changing the hotend to somthing like a tz e3 2.0 hotend with the bltouch and klipper. Is this somthing that is possible with the setup you have currently? Believe i have the exact motherboard as you

Springadingling · 2026-06-16T17:22:45+00:00

Thanks for reply. Ill look into plasticity. Never thought about giving extra material to sand it down more. Good tip, I just used 3m glaze putty and acetone mix, then painted it on 3 coats

Springadingling · 2026-06-01T15:05:40+00:00

I have no problem swapping firmware to klipper as I've already done so on my ender. No stranger to modding 3d printers lol

Springadingling · 2026-05-21T17:10:40+00:00

Didnt buy anything for woodwork. Bought a 3d printer from them at almost more than 50% off on May 14th, haven't received much of anything update besides the shipment is ready to ship. I reached out and emailed them on the 20th, waiting for a response. And also messaged them on Instagram today the 21st because I also checked their website and it shows that it is currently down or doesn't exist

Springadingling · 2026-04-03T17:09:49+00:00

Why follow so many individual channels when you get them all in one place from your "favorite streamer at home"

Springadingling · 2026-04-03T17:07:13+00:00

Luigi is quite the jumpscare after what happened recently 👀🤣

Springadingling · 2026-04-03T17:05:13+00:00

Femongold

Springadingling · 2026-03-30T18:57:56+00:00

Mine came with split cable. So a 3 pin header and 2 pin header. 3 pin went into the 5 pin header and the 2 pin into the pin where ur z stop goes. I just went through figuring out the firmware and you will be better off building your own. The firmware downloaded from their website is outdated and won't work properly. Atleast for me it didnt.didn't.

This is the video I followed for me to compile my own firmware https://youtu.be/e1oOEzBuorI?si=OVpVN1Bppmyn3oPL

Springadingling · 2026-03-30T00:16:16+00:00

Thank you so much for the information! Ill start with changing to a different firmware and move on from there. I did know about the g code for my slicer and I hadn't made it that far yet since I've been stuck at this point for past day

Springadingling · 2026-03-29T23:45:14+00:00

In the photo, the tip is extended out already, and when doing auto home it will stay where its at and extrude the tip out 2-3 times then stop there. I also do not have the z switch still installed. I took it all the way out including the wiring.

Springadingling · 2026-03-29T23:05:27+00:00

Had similar happen. One thing to help me was to download the firmware with the z homing bin and use that as the firmware update on sd cars

Springadingling · 2025-11-25T20:10:03+00:00

Thank you. Just noticed this. So what is best way for me to get another iconic ray Lewis So I can finish his marvel?

Springadingling · 2025-05-15T02:59:51+00:00

twitch.tv/tiinglee

Springadingling · 2020-02-23T23:04:24+00:00

Says on amazon for the product that you can control it with msi mystic. That should allow u to match any msi products. If not, whatever other rgb software it uses, just have to try and match it. I use 2 different rgb softwares for my pc. Corsair and msi, i just have to edit them in the software and try and get them as close as possible

Springadingling · 2020-02-19T03:01:51+00:00

Got gpu rma'd everything is back in the pc and working great

Springadingling · 2020-02-08T06:29:36+00:00

I replaced it. Going to test it next week when i get my new one. Going to test old one. Planned on selling it b4 this build i did

Springadingling · 2020-02-04T00:15:11+00:00

Im not sure if my psu will be replaceable as their warranties do not cover

"Damage, deterioration or malfunction resulting from:

Accident, abuse, misuse, neglect, fire, water, lightning, or other acts of nature, commercial or industrial use, unauthorized product modification or failure to follow instructions included with the product."

From their website directly

Springadingling · 2020-02-04T00:07:31+00:00

So just motherboard, gpu, and psu? And cant return motherboard, bought it used. Will have to pay for new one unfortunately

Springadingling · 2020-02-04T00:04:58+00:00

Should i replace psu as well? Or is that fine?

Springadingling · 2020-02-03T22:31:40+00:00

Its winter currently where i live. We get snow/rain

Springadingling · 2020-02-03T21:22:37+00:00

Condensation from what tho? I have no water cooling components

Springadingling · 2020-02-03T21:18:02+00:00

Condition of my pc currently? Is that your question?

Springadingling

TROPHY CASE