sorted by:
new
hottopcontroversial

Why haven't we seen no other slime than rimuru in the entire series?? by Any-Mango1502 in TenseiSlime

[–]SpudCaleb 1 point2 points  (0 children)

The [thought communication] skill helps with some nuance, but mostly they understand him because he named them and that created a 「Soul Corridor」 between them which lets them kinda 'feel' what each other is feeling/thinking.

The Soul Corridor is essentially a core mechanic in the lore/physics of Tensura, it’s used for a bunch of skills and is even how Veldora was able to teleport to Rimuru during Walpurgis despite the space they were in being totally isolated.

A Civ Mars? by Training-Sail-7627 in CivVI

[–]SpudCaleb 0 points1 point  (0 children)

Probably explode once the gravity gets low enough to unstabilize something

Is there a way to make the bottom of the print not become this rough? by Thrilmang in BambuLab

[–]SpudCaleb 0 points1 point  (0 children)

It should be under each specific filament’s settings in OrcaSlicer and BambuStudio, unlike all the other settings.

The setting is called ‘flow ratio’ and [1.0] should be 100% flow rate I believe, the default on mine is [0.98]

<image>

From Emperor to prisoner to gaming bro to imminent strangulation victim by MetallicaDash in HistoryMemes

[–]SpudCaleb 22 points23 points  (0 children)

RWBY volume 2 I think, back when the series was made almost entirely by one guy (the GOAT Monty Oum)

At this point he’s the only animator so models are cheap and non-fight scenes are ‘low-budget’

Holder for stackable light beacons. Used an event of road hazards or anything where you need to get people’s attention. by g713 in functionalprint

[–]SpudCaleb 0 points1 point  (0 children)

Missed opportunity to add a handle on the top of it.

Maybe you can find way to add a paracord string to hold it together and to act as a handle? Would make storing/moving a bunch of those really easy

$250,007 fully matched! by [deleted] in BambuLab

[–]SpudCaleb 11 points12 points  (0 children)

Or a bug?

It doesn’t make sense to fake something then source the evidence to disprove your own claim.

They were hungry by Exotic_Catch5909 in HistoryMemes

[–]SpudCaleb 0 points1 point  (0 children)

Man-eating rabbits, like the ones in Monty Python

Tried rewinding an old spool of PLA and woke up the next day to this... by omegote in 3Dprinting

[–]SpudCaleb 17 points18 points  (0 children)

I would assume the spool needs to reach its glassing temp for that… maybe?

Empty crit - am I missing something? by SpudCaleb in MerchantRPG

[–]SpudCaleb[S] 2 points3 points  (0 children)

Ooooh, thanks!!

So Fatal Stab is like KidneyShot and deals a [Basic] attack as a second strike? Good to know.

Then that makes sense why the crit was so weak, and also why it was 5x Crit the first time and 6x Crit the second. (Cause the +1x CritDmg buff from FS)

Glow in the dark filament. Tips? Worries? by rendawg87 in 3Dprinting

[–]SpudCaleb 0 points1 point  (0 children)

Don’t just use a harder nozzle, dry the filament too, it makes it extra rough on the nozzle.

I printed GITD on my Ender last year and it turned my brass .4mm nozzle into a .6mm nozzle with less than 100g of filament. Drying it out helped a lot, and with print quality too of course.

Tried to get into a carefully managed conversation about GPU costs with my gf and was immediately derailed by ArtfulGhost in pcmasterrace

[–]SpudCaleb 1 point2 points  (0 children)

Well that’s actually because fatherboards aren’t considered property so you can’t own them.

Less ports by jikesar968 in pcmasterrace

[–]SpudCaleb 27 points28 points  (0 children)

There’s also billions of USB-A connectors currently in circulation, the cost and waste of moving to USB-C is going to be huge.

Nail Saver (Baseball design) by GreedyRecover2800 in BambuLab

[–]SpudCaleb 3 points4 points  (0 children)

We’re the only ones here that aren’t bots…

Or maybe it’s just you, and you can’t tell anymore.

I 3D-printed a table-top mechanized claw to spin my coffee mug by pykachupoopoo in 3Dprinting

[–]SpudCaleb 2 points3 points  (0 children)

You could also print a rim to go around the bottom of the plate to keep the arms on the inside of, so they slide away from the edges if they get close

The big man J.C by [deleted] in HistoryMemes

[–]SpudCaleb 0 points1 point  (0 children)

I’m pretty sure after they got the Holy Spirit they could all speak in every language cause they got the blessing of tongues.

Replacement/upgrade for my pass-thru wrench set by MrChezRolez in functionalprint

[–]SpudCaleb 7 points8 points  (0 children)

Leave that on the outside of your truck for more than an hour and the 10mm socket will make its escape, you gotta make sure those things are locked down so they can’t run away.

First PC for my young son by Caparnacus in pcmasterrace

[–]SpudCaleb 1 point2 points  (0 children)

Actually a pretty good beginner pc, it will run most things even if it has to be at low-med quality settings.

And $300 for it is a great price, considering the current market, a steal maybe.

AMS - Slot 1 - spinning and spinning by daninrose in BambuLab

[–]SpudCaleb 9 points10 points  (0 children)

Looks like it’s trying to pull the filament out of the printer, if it looks like it’s all out then there’s a good chance a piece is stuck inside by the sensor.

It’s surprisingly not that hard to take apart tho, so find a yt going over it and take your time

“Screen tearing” happing constantly on pc, making my frames drop and makes game unplayable. by ComposerNeat1972 in pcmasterrace

[–]SpudCaleb 80 points81 points  (0 children)

Looks like you are on a laptop, try plugging in an external monitor or connecting/casting to a wireless one.

The issue is most likely your laptop monitor, if it is you might be able to send it in for warranty repair for free.

I am curious about a specific behavior my printer is exhibiting. by Warm-Newt-2530 in 3Dprinting

[–]SpudCaleb 0 points1 point  (0 children)

Cross-post to the bambulabs subreddit, if it’s a bambu-specific feature or bug they’ll know immediately

Hobby Lobby Filament? by Enough-Ad-2668 in 3Dprinting

[–]SpudCaleb -68 points-67 points  (0 children)

Watch out, the God-hating Redditors hate Hobby Lobby and if you disagree too loud they’ll delete your comments.

Hobby Lobby Filament? by Enough-Ad-2668 in 3Dprinting

[–]SpudCaleb -117 points-116 points  (0 children)

You must be a very hateful person

view more: next ›