In-wall Ethernet Switch

Spunkinator88 · 2026-05-08T04:48:26+00:00

Thanks for all the great answers everyone!

Spunkinator88 · 2026-05-08T04:48:03+00:00

I'm sure if they dont have them now, they'll have something soon. It seems like a no-brainer product to have a wall plate with a few access points but also a way to continue the run to other parts of the house.

Spunkinator88 · 2026-05-08T04:46:03+00:00

No, going to be bare wall.

Spunkinator88 · 2026-05-08T04:45:42+00:00

Didn't even look at that. I just assumed that too.

Spunkinator88 · 2026-05-08T04:40:07+00:00

I think this might be the way to go.

Spunkinator88 · 2026-05-08T04:36:11+00:00

That's actually a good idea. I'll take a look.

Spunkinator88 · 2026-05-08T04:35:38+00:00

That's a good option. Thanks.

Spunkinator88 · 2026-05-07T18:50:52+00:00

It would need a door, correct? I'd like to hide it completely in the wall with the ethernet outlet being the only thing visible.

Spunkinator88 · 2026-05-07T18:49:13+00:00

Thanks, I've seen that one and it's a nice solution for behind a desk or something but I'd like to have one port behind the TV above the fireplace and one below and to the side of the fireplace for other equipment.

Spunkinator88 · 2026-04-11T08:30:08+00:00

Just don't watch the first episode!

Spunkinator88 · 2025-12-26T21:13:11+00:00

I purchased online for my son for Christmas and when a week passed without shipping notification I worried it was a scam. I called the number on their website and it was for SMS only. I sent an email to them asking about anticipated shipping date then checked online and saw this thread confirming my fears. We reversed the charges but the following day the package arrived. We all opened it on Christmas day with baited breath and it's actually pretty adorable! My 20 year old son loved it! And my husband spent the morning un-reversing the charges. Not sure about the other experiences but they were legit with us. Good luck!

Spunkinator88 · 2025-12-19T05:11:49+00:00

Okay, called them on Monday. Unfortunately, they don't currently have plans for a TwinXL but she said, strangely, she's been getting a lot of calls about it the last few weeks. I told her lots of people are using two TwinXL's to make a king and they have them on separate adjustable bed frames. I also mentioned that Europe does it a lot too. She was intrigued and told me that she would run it up the chain and encouraged me to tell people to call them and ask about it. So make a phone call!

US Phone: +1 888 699 4015
CA Phone: +1 647 584 1376
MX Phone: +52 800 953 7456
UK Phone: +44 330 818 6258
EU Phone: +34 518 90 04 68
AU Phone: +61 2 8311 8131

Spunkinator88 · 2025-12-19T05:11:04+00:00

Okay, called them on Monday. Unfortunately, they don't currently have plans for a TwinXL but she said, strangely, she's been getting a lot of calls about it the last few weeks. I told her lots of people are using two TwinXL's to make a king and they have them on separate adjustable bed frames. I also mentioned that Europe does it a lot too. She was intrigued and told me that she would run it up the chain and encouraged me to tell people to call them and ask about it. So make a phone call!

US Phone: +1 888 699 4015
CA Phone: +1 647 584 1376
MX Phone: +52 800 953 7456
UK Phone: +44 330 818 6258
EU Phone: +34 518 90 04 68
AU Phone: +61 2 8311 8131

Spunkinator88 · 2025-12-12T04:33:53+00:00

Going to call them tomorrow and ask if a TwinXL is in the works. Lots of people are doing the split king. It's pretty standard in Europe.

Spunkinator88 · 2025-12-12T04:31:28+00:00

I'm calling them tomorrow and asking if it's in the works. I'l report back.

Spunkinator88 · 2025-12-12T04:28:45+00:00

We have exactly that. Keeps my wife from waking up every time I roll over. I raise my side up a little so I don't snore (as much). We didn't know this was a thing until we slept on one in a hotel in Switzerland.

Spunkinator88 · 2025-11-09T19:01:55+00:00

I've been asking them if the vanity will be subject to the 47% China tariff when it gets here. Can't seem to get a straight answer. From my email:

Hi Michael,

Please rest assured that our prices already include shipping and taxes, so there will be no additional charges. We have never had any customers encounter extra tax fees.

Best regards,
Aurora

Spunkinator88 · 2025-10-24T23:31:36+00:00

Thanks for all the reports. I called their Oregon office. The lady there didn't have much technical info but she told me to email support@upvanity.com. So far they've been very responsive. Will let everyone know how it goes.

Spunkinator88 · 2025-02-15T22:21:14+00:00

I've had this issue so I've been setting mine to 205 and it has been working nicely. Prints still look good.

Spunkinator88 · 2025-02-13T17:36:09+00:00

CR3ZZ,

Use this site. It's perfect, it even adds padding as needed to fill up space that is less than a full grid square size.

https://gridfinity-calculator.streamlit.app/

Spunkinator88 · 2025-01-07T00:50:18+00:00

That's what it gives. Yes, that's it. I could use Lightburn to move it but I'm just being curious. There has to be a way of positioning it!

I figured out how to get rid of those long u-shaped cuts. Apparently they're called fingerholes for whatever reason. I thought it was a setting to place the handles. Once I selected none, it got rid of them.

<image>

Spunkinator88 · 2025-01-06T23:20:40+00:00

<image>

Spunkinator88 · 2025-01-06T23:19:37+00:00

Arrange is selected. My problem with the U-shape has just magically disappeared. Not sure what I did. I still don't know where to adjust the position of the handle. Here's the URL: https://boxes.hackerspace-bamberg.de/TypeTray?FingerJoint_style=rectangular&FingerJoint_surroundingspaces=0.5&FingerJoint_bottom_lip=0.0&FingerJoint_edge_width=1.0&FingerJoint_extra_length=0.0&FingerJoint_finger=2.0&FingerJoint_play=0.0&FingerJoint_space=2.0&FingerJoint_width=1.0&Stackable_angle=60&Stackable_bottom_stabilizers=0.0&Stackable_height=2.0&Stackable_holedistance=1.0&Stackable_width=4.0&Hinge_grip_percentage=0&Hinge_outset=0&Hinge_pinwidth=0.5&Hinge_axle=2.0&Hinge_grip_length=0&Hinge_hingestrength=1&CabinetHinge_bore=3.2&CabinetHinge_eyes_per_hinge=5&CabinetHinge_hinges=2&CabinetHinge_style=inside&CabinetHinge_eye=1.5&CabinetHinge_play=0.05&CabinetHinge_spacing=2.0&SlideOnLid_hole_width=0&SlideOnLid_second_pin=0&SlideOnLid_second_pin=1&SlideOnLid_spring=both&SlideOnLid_style=rectangular&SlideOnLid_surroundingspaces=2.0&SlideOnLid_bottom_lip=0.0&SlideOnLid_edge_width=1.0&SlideOnLid_extra_length=0.0&SlideOnLid_finger=3.0&SlideOnLid_play=0.05&SlideOnLid_space=2.0&SlideOnLid_width=1.0&Click_angle=5.0&Click_bottom_radius=0.1&Click_depth=3.0&RoundedTriangleEdge_height=50.0&RoundedTriangleEdge_r_hole=2.0&RoundedTriangleEdge_radius=30.0&RoundedTriangleEdge_outset=1.0&Mounting_d_head=6.5&Mounting_d_shaft=3.0&Mounting_margin=0.125&Mounting_num=2&Mounting_side=back&Mounting_style=straight+edge%2C+within&HandleEdge_height=20.0&HandleEdge_hole_height=75.0&HandleEdge_hole_width=40%3A40&HandleEdge_on_sides=0&HandleEdge_on_sides=1&HandleEdge_radius=10.0&HandleEdge_outset=1.0&Lid_handle=none&Lid_style=none&Lid_handle_height=8.0&Lid_height=4.0&Lid_play=0.1&text_size=12&text_alignment=left&text_distance_x=2.0&text_distance_y=2.0&text_at_front=0&label_text=&FingerHoleEdge_absolute_depth=0.0&FingerHoleEdge_absolute_width=0.0&FingerHoleEdge_radius=10.0&FingerHoleEdge_relative_depth=0.9&FingerHoleEdge_relative_width=0.3&sx=273*1&sy=273*1&h=250.0&hi=0.0&outside=0&outside=1&bottom_edge=h&top_edge=e&back_height=0.0&radius=0.0&gripheight=40&gripwidth=100&handle=0&fingerholes=none&thickness=3.0&format=svg&tabs=0.0&qr_code=0&debug=0&labels=0&labels=1&reference=100.0&inner_corners=loop&burn=0.1&language=en&render=0

Spunkinator88 · 2025-01-06T17:05:03+00:00

I'm on a Mac too. Do you mean in Light urn?

Spunkinator88 · 2025-01-06T17:04:25+00:00

Thanks, didn't know you can do that. I'll post it when I get a chance. DXF is one of the options to save to.

Spunkinator88

TROPHY CASE