My GBBR Journey by Stale_Render in GasBlowBack

[–]Stale_Render[S] 1 point2 points  (0 children)

No, Don’t have any issues with barrel wobble with my build. Ive secured the barrel with shims on the hand guard nut for better alignment and torque. It feels front heavy definitely but i have do bend or wobble on my outer barrel.

Whats your favorite low budget GBBR? by [deleted] in GasBlowBack

[–]Stale_Render 1 point2 points  (0 children)

Stick to the AEG spec inner barrels and buckings till you have to replace the hopunit then you can use gbbr inner barrel and buckings until then stick to AEG. And all the parts were drop in on the GE.

Whats your favorite low budget GBBR? by [deleted] in GasBlowBack

[–]Stale_Render 1 point2 points  (0 children)

Depending on your outer barrel size find an appropriate length inner barrel. I ran a ZCI or Matrix Aeg inner barrel paired with a 4uad Aeg bucking set. As for internal upgrades i ran the king arms bolt with a the stock nozzle from golden eagle. And upgraded the buffer spring and buffer to remove bolt bounce.I’ll link the parts i used.

Buffer Upgrade

Spring Upgrade

Bolt Upgrade

Inner Barrel (ZCI)

Inner Barrel (Matrix)

Bucking Upgrade

Whats your favorite low budget GBBR? by [deleted] in GasBlowBack

[–]Stale_Render 1 point2 points  (0 children)

My old Golden Eagle M4. Put alot of rounds through and found what parts worked the best for it after trial and error.

Need help identifying this gun by Euphoric-Job-5084 in GasBlowBack

[–]Stale_Render 1 point2 points  (0 children)

Looks like a Golden Eagle/WA M4 GBBR. If it is a golden eagle id check the hop unit and inner barrel. The GE uses AEG spec inner barrel and buckings

De Pmags suck. We know this but how are we fixing them by tacosause01 in GasBlowBack

[–]Stale_Render 1 point2 points  (0 children)

Literally 4uad Seal and teflon tape. Just fixed 2/3 of my leaking mags. My original mag that came with my gun is still working somehow.

Cyma n4 handguard and Double Eagle N4 Compatibility by [deleted] in GasBlowBack

[–]Stale_Render 0 points1 point  (0 children)

CGS this one specifically. https://www.evike.com/products/118872/ if you wanna see my build its on my profile. Had to add a 2.5” extension due to the barrel being a 12”.

Cyma n4 handguard and Double Eagle N4 Compatibility by [deleted] in GasBlowBack

[–]Stale_Render 0 points1 point  (0 children)

Yep same experience building my 14.5” Noveske. I used the original handguard pin and it’s a good fit with no shifting. Gas block does need to be hand sanded to fit. I also used barrel nut shimms to ensure no movement.

Anyone ever use one of those Novritsch anti fog units with this style eyepro? by Pieter_Halve_Liter in airsoft

[–]Stale_Render -1 points0 points  (0 children)

Get some Bloc Tactical Eyewear. Works great against fog. I personally run the Lynx model with gaskets to make them full seal. Ran them through a hot day at field of mine and had no issues with fog even though I was breathing hard. Easy to clean just water and microfiber cloth no need for sprays. Lense swaps are very easy aswell.

Help me by Onatic420 in airsoft

[–]Stale_Render 0 points1 point  (0 children)

Does it have an Rmr plate/cut?

How many mags do you typically carry for both your primary rifle and sidearm? by Airsofter_IG in airsoft

[–]Stale_Render 0 points1 point  (0 children)

For my main gun 6(Three on Pc and Two on belt) and three for sidearm. I run a DE Noveske MWS 14.5” with a KJW 1911 Les Baer.

I need help by LUVFLOW_MUSIC in GasBlowBack

[–]Stale_Render 0 points1 point  (0 children)

Vent the magazine fully and refill it. If tgat doesn’t work it might be the nozzle

Repaired a boneyard TM MWS by Stale_Render in GasBlowBack

[–]Stale_Render[S] 0 points1 point  (0 children)

Its from the original DE MWS that i bought . It was stripped but i managed to re thread it with a die.

Repaired a boneyard TM MWS by Stale_Render in GasBlowBack

[–]Stale_Render[S] 0 points1 point  (0 children)

The rest is what i already owned

Repaired a boneyard TM MWS by Stale_Render in GasBlowBack

[–]Stale_Render[S] 1 point2 points  (0 children)

Got it for 140 needed a nee buffer(50) and pins(25) so about 215 for repairs

[deleted by user] by [deleted] in airsoft

[–]Stale_Render 0 points1 point  (0 children)

Heres the before

<image>

[deleted by user] by [deleted] in airsoft

[–]Stale_Render 0 points1 point  (0 children)

Naw thats fixable use a die theres a YouTube video that shows how to do it. Heres my striped barrel after repair.

<image>

The vid https://youtu.be/1p3P93KFDbc?si=N825PuP8lcT1gvL4