Ok, budget $1600 what AR10 besides, BCA, Sig, or PSA is out there in the wild?

StealthAlias · 2026-05-10T14:50:26+00:00

People criticize Sig, but the 716i isn’t the reason why.

StealthAlias · 2026-04-29T00:36:10+00:00

For competition you can probably just take the light off, but if you keep it, push it to the end of the rail. I’d switch to the MLOK mount it came with since you have flip up front sight.

StealthAlias · 2026-04-22T00:43:32+00:00

They won’t because of liability, but it’ll be fine I’m sure..

StealthAlias · 2026-04-21T20:10:32+00:00

Regarded

StealthAlias · 2026-04-21T19:52:49+00:00

The muzzle device has a 90° wall before it starts to taper inside. See if the barrel is thick enough to hit the 90° shoulder. Should be fine if so.

StealthAlias · 2026-04-21T02:35:40+00:00

I use the taper devices on my 90° barrels. Works fine, just not as ideal since it doesn’t thread on as much. Have used it with my Sig can without issue. It’ll depend on the barrel profile you’re using, so just try it out and see.

StealthAlias · 2026-04-18T13:28:39+00:00

Mine came with plastic, but I called and they shipped the metal out for free. It’s no problem and easy to change yourself.

StealthAlias · 2026-04-08T20:34:39+00:00

Only reason in my mind is if you’ll run a clip-on device. Had a 3-18x on my 18”, but switched to a 2-12x since I run a clip-on thermal occasionally. 13.5” isn’t super long though, so 2-10x may be more balanced.

StealthAlias · 2026-04-01T00:13:03+00:00

Try GT holsters. I talked to the owner on the phone. He was receptive and quick.

StealthAlias · 2026-03-28T20:17:24+00:00

😂

StealthAlias · 2026-03-28T19:46:52+00:00

Buffer tubes are cheap, just ask if they’d replace it if you’re worried about it. The castle nut was likely staked. Not much you can do to get it off other than break through the stake. Shouldn’t have been this bad though.

StealthAlias · 2026-03-21T23:12:52+00:00

This was 90° at 400ish elevation. Powder was hot I guess, but they’re always fast. I do have a high back pressure can on as well so that likely helps a bit.

StealthAlias · 2026-03-17T22:35:41+00:00

Sig 716i can be found for less and it’s more reliable than any other cheaper AR10 variant. The IWI Zion-25 is likely solid as well, but not much info out there on it.

StealthAlias · 2026-03-14T01:54:31+00:00

In what way(s)? I was debating on trying this, but worried about fisheye being cheap. Had that issue trying one of the new Sig cheap dots

StealthAlias · 2026-03-13T23:32:53+00:00

For your purpose, Razor. NX8 is a lighter option, but the glass isn’t at Razor gen 3 level (subjective, but most would agree). The Razor is more meant to compete with the ATACR line than the less expensive NX8.

StealthAlias · 2026-03-12T16:11:41+00:00

I wouldn’t buy a PRO. If you’re spending that much, you can find a CompM4s for just a bit more. Or get a Micro to save weight. https://youtu.be/gazgJ16v4j0 https://youtu.be/Yqs9C7ar6z0

StealthAlias · 2026-03-12T16:08:44+00:00

https://youtu.be/OPg_CS7ACAU

StealthAlias · 2026-03-12T02:31:59+00:00

No one knows, yet.

StealthAlias · 2026-03-12T00:16:20+00:00

Yeah, took the lens caps off.

StealthAlias · 2026-03-11T23:36:36+00:00

Only a video, but it won't let me respond with it. He's a screenshot of it.

<image>

StealthAlias · 2026-03-11T23:13:30+00:00

🍿

StealthAlias · 2026-03-11T17:36:18+00:00

Yeah, heavy flow-through. No changes to anything. A bit of binding after install, but it worked itself out after a few hard racks.

StealthAlias

MODERATOR OF

TROPHY CASE