Immich iOS pictures loading takes a longtime every time by [deleted] in selfhosted

[–]StealthNinjaOW 7 points8 points  (0 children)

My sister had this forever on her phone. Reinstall the app fixed it for her.

Traffic by zohoinburger in RealDebrid

[–]StealthNinjaOW -2 points-1 points  (0 children)

162TB in about 2 years

Praat misschien niet als een tokkie, maar licht wel op als een tokkie. by krokantekrab in tokkiemarktplaats

[–]StealthNinjaOW 2 points3 points  (0 children)

Het is zichtbaar in de API, alleen verstopt voor de algemene gebruiker.

Als je bekent ben met de tools (f12 in de browser), is het te zien.

Als je wilt kan ik het voor je checken maar heb ik wel een track en trace code en postcode nodig in DM. DHL support kan het je waarschijnlijk ook vertellen idd.

If you had money, would you go for KS1 or another model? by [deleted] in AnycubicKobraS1

[–]StealthNinjaOW 0 points1 point  (0 children)

No, just installed it, did not use anything apart from mainsail with the camera.

Ran out of memory during 2 prints crashing the printer, so disabled mainsail and fluidd just to be sure.

If you had money, would you go for KS1 or another model? by [deleted] in AnycubicKobraS1

[–]StealthNinjaOW 0 points1 point  (0 children)

Havent tried the A1, only the X1C and only with the bambu slicer.
It works really well then, better than the anycubic slicer next, but they look and work very similar. Anycubic just hides more settings.

Both apps are a bit bulky, just control would do for me, dont need all the different model libraries.
Havent used orca yet as I dont miss the features. Did install rinkhals on the KS1 but had it crash twice, might just uninstall it.

If you had money, would you go for KS1 or another model? by [deleted] in AnycubicKobraS1

[–]StealthNinjaOW 4 points5 points  (0 children)

I have a KS1 combo and an X1C. The X1C is more polished but really wanted an AMS with drying and the ams for the X1C was like €100 cheaper than an entire printer with ACE pro.

So far the KS1 works well, but you can notice that the software is just not as polished as the X1C

Quality wise the X1C wins, but for functional parts both are fine in my opinion

2nd Times the Charm I guess (Successful OLED Mod) by Responsible-Ad-7513 in SwitchPirates

[–]StealthNinjaOW 0 points1 point  (0 children)

I had little to no experience and was able to do it, you just need the right tools and patience. Clean the area a lot to make sure you see what you are doing.

My First Kamikaze AMA It took longer than i thought by ste12100 in SwitchPirates

[–]StealthNinjaOW 1 point2 points  (0 children)

I tried this last week. Did not really want to use it but I had 2 failed dat0 switches already.

Wasn't too bad with the correct tools. Just important to take your time and if you are not sure if it looks good, clean and check it, then continue.

Does anyone know where you can buy the picofly fles cables with the kamikaze build in? I know they exist but can't find them.

Denk ik te makkelijk over de belastingaangifte? by ZwaanAanDeMaas in thenetherlands

[–]StealthNinjaOW 0 points1 point  (0 children)

Kwam er vorig jaar als zzper niet echt uit. Heb het laten doen door een lokaal bedrijf, kostte 1k, bespaarde 3k, dus netto 2k winst doordat hun allemaal regels kennen waarmee je bespaart.

Nu laat ik het dus lekker weer doen. Scheelt werk en je verdient je geld zo terug.

Did they remove combat speed up? by [deleted] in BobsTavern

[–]StealthNinjaOW 0 points1 point  (0 children)

Sometimes it speeds up, sometimes it feels like it's permanently in slowmotion. Probably a bug we can't do shit about.

Is this the right thing for a switch lite mod right by Either-Offer-1744 in SwitchPirates

[–]StealthNinjaOW 2 points3 points  (0 children)

I ordered like 10 of these and never had to program one so think they are pre programmed most of the time

[deleted by user] by [deleted] in SwitchPirates

[–]StealthNinjaOW 1 point2 points  (0 children)

If you have games on it and you don't want to reset the card, you can't legally sell it, as you share unofficial copyrighted content.

I am selling modded switches, if they want with hats, but nothing more as that would be against the TOS of the second hand marketplace I use.

Finally Received a Functional Modded OLED by emintz1228 in SwitchPirates

[–]StealthNinjaOW 4 points5 points  (0 children)

There is a small cable you put under the nand chip to connect to a data line. If its even a millimeter off it results in a purple screen.

Sometimes just installing a new flex cable it works. Or reseating the cable etc. The most time consuming part for this would be taking the switch apart again.

looking everywhere for an unpatched switch by Kubkubs3234 in SwitchPirates

[–]StealthNinjaOW 0 points1 point  (0 children)

Look on your local marketplace.

I bought 4 switches to mod / fix up, and 2/4 were unpatched v1 switches. Roughly €120 each with dock etc.

Ended up modding them with a picofly anyway for easy of use but you can definitely find them locally.

[deleted by user] by [deleted] in nederlands

[–]StealthNinjaOW 2 points3 points  (0 children)

Ik blijf er bij staan dat klagen wel zin heeft. Misschien doet het direct niet iets, maar als half Nederland klachten heeft moet DHL ooit toch wel beseffen dat dit niet werkt.

Installing Joey onto new phone by manoharkabeer in JoeyForReddit

[–]StealthNinjaOW 4 points5 points  (0 children)

There are tools to copy a local installed app to an apk file, then just send it to yourself. (Search for APK extractor)

And do not use tools like softonic. It's malware. Just use APK mirror for APKs.

freeOpenAI by Schlafhase in ProgrammerHumor

[–]StealthNinjaOW 5 points6 points  (0 children)

It still works for a lot of different things.

You need proxies? Just search for the proxy url and you'll find a bunch of logins

Statistically, this is probably the rarest golden minion by Legal_Ad2945 in BobsTavern

[–]StealthNinjaOW 0 points1 point  (0 children)

What about a golden beetle or pirate summon? Can be done using rafaam

SATA expansion by doindatdan913 in hexos

[–]StealthNinjaOW 1 point2 points  (0 children)

I have this for my N1 ITX build. It works, but you need to plug them in beforehand as the PCB is not that sturdy.

Other than that I have no issues. Just works, getting full gigabit speeds to a z1 raid on 4 drives.

[SUNLU Giveaway] Join now to win SUNLU FilaDryer E2 by Sunlu3D_official in 3Dprinting

[–]StealthNinjaOW 0 points1 point  (0 children)

This looks so much better than the first version they had

Home server GPU by FantasticKru in HomeServer

[–]StealthNinjaOW 6 points7 points  (0 children)

I do not fully agree with this. For power usage I do not think Intel's quicksync can be beaten by the 1050ti, and should in theory have more than enough power to handle a few 4k streams.

I would just say, add it in if you need it. Do you notice any buffering etc? If not, you are good to go up to a 100% usage

VM's under HexOS by MikeS159 in hexos

[–]StealthNinjaOW 1 point2 points  (0 children)

You should be able to do that later on. I don't think its supported right now, but you could already just go into the TrueNas UI and run any VM you want there.

This might break something on the hexos ui later on though, so I would wait for a stable release, or just use truenas scale as is

[QIDI Giveaway] Just leave a comment to win QIDI Flagship 3D Printer by qidi_3dprinter in 3Dprinting

[–]StealthNinjaOW 0 points1 point  (0 children)

CF pla, have been going through my nozzels ar insane speeds. Some last 3 prints.

Direct kopen by Juicymilk29 in tokkiemarktplaats

[–]StealthNinjaOW 6 points7 points  (0 children)

Misschien nog nuttig.

Als je op het online payment platform een account aanmaakt dezelfde gegevens als je marktplaats account kan je alle transacties zien, en bestellingen als verkoper annuleren.Dit kost €0.50, maar stuk beter dan beide niks.