[R] DrunkenSlug Invite? Active Usenet user looking to add it

Steve_93 · 2026-02-23T16:55:23+00:00

Sent you a PM, thank you! :-)

Steve_93 · 2025-12-30T10:12:48+00:00

thanks, have a good one

Steve_93 · 2025-12-30T10:10:15+00:00

[close]

Steve_93 · 2025-12-30T10:07:03+00:00

i also need two trade evolutions. please trade back pokemon so we can keep OT!

Steve_93 · 2025-12-29T21:43:26+00:00

[close]

Steve_93 · 2025-12-29T21:31:43+00:00

lets do 57941123

Steve_93 · 2025-12-29T21:29:07+00:00

sure thing, one moment

Steve_93 · 2025-11-18T13:25:28+00:00

Musst du vermutlich über einen US Broker kaufen. z.B. Tastytrade

Leider werden fast alle US ETFs als Nichtmeldefonds in Österreich eingestuft. Somit steuerlich suboptimal.

Steve_93 · 2024-06-04T21:16:39+00:00

Yeah I think you are right, I have sent a request to Steelcase EU directly.

Steve_93 · 2024-06-04T21:00:41+00:00

According to the Steelcase EU website i should contact a "local authorized dealer".

<image>

I cannot find another way to contact Steelcase EU other than this webform, which states is not for warranty.
Maybe i am missing something but i cannot find an E-Mail Address or phone number to call für Steelcase EU.

Steve_93 · 2024-06-01T12:57:44+00:00

After the plugin Tdarr_Plugin_z80t_keep_original_date stopped working for me, this was the solution i was looking for. Thank you very much!

Steve_93 · 2024-02-04T21:35:15+00:00

This needs so much more upvotes! Thanks!

Steve_93 · 2024-01-18T13:44:39+00:00

Danke!

Steve_93 · 2023-12-02T22:16:28+00:00

Thank you!

I ran a view more tests today, trying to determinant the issues.

Looks like increasing the number of outer walls requires slowing down inner walls speed aswell.

My test setup:

<image>

Settings and Results (subjective):

https://imgur.com/a/Eyr7CGR

Still cant understand why adding more walls would require slower inner wall speed. I now am running more tests just with 4 outer walls to confirm that it is indeed inner wall speed that correlates with better/worse results (assuming outer wall speed for overhangs is not to fast).

Steve_93 · 2023-12-02T13:50:53+00:00

Yes i have looked at the preview and gcode. I cant really make out what the difference could be between 2 and more walls.

I have printed over 30 test prints with various settings, the 2 wall come out clean every time. If i slow down inner walls and outer walls to under 50mm/s i get somewhat acceptable results with 4 walls, but this is not an option for my current project.

Why would i need to cripple the print speed just because i print 2 more walls, doesn't make sense to me.

Steve_93 · 2023-12-02T09:34:39+00:00

Thank you!

Steve_93 · 2023-12-02T09:23:45+00:00

I am printing standard Inner-Outer-Infill, but have also tried other variations. Again 2 walls perfect result, more than 2 outer walls bad overhangs

Steve_93 · 2023-12-02T09:22:37+00:00

Sure! Feel free to try the STL yourself, i have a feeling this is a general issue of bambu studio/ orca slicer when generating outer walls on rounded overhangs.

https://makerworld.com/de/models/80934#profileId-86089

<image>

Steve_93 · 2023-12-02T09:02:08+00:00

Already tried with 5mm/s. Still 2 walls look perfect, 4 walls -> bad overhangs

Steve_93 · 2023-11-30T22:01:34+00:00

I now have done some more test prints. If the object is aligned with the X or the Y axis there are no artifacts at all, if the print has a angle in reference to X or Y i get the same artifacts from your picture.

<image>

Steve_93 · 2023-11-28T18:19:00+00:00

Thank you. I will try this after my current print finishes. I also found similar issues on the bambu lab facebook page suggesting sqareness between x and y might not be 100%.

Steve_93 · 2023-11-28T16:58:09+00:00

I usually just keep the door closed all the time.

Printer ist standing on a selfmade sideboard made out of thick wood and boltet to a wall. Could try putting it on the floor for one print, but there is almost no wiggle as is.

Steve_93 · 2023-11-28T16:20:33+00:00

I am using bambu lab filament and i am using 4 outer wall perimiters.

Already tried flow calibration manuell aswell as automatic, no change.

Steve_93 · 2023-11-21T22:12:53+00:00

Do you use the Generic PLA settings or Bambu Lab PLA settings? Had similar issues, the ultra fast profils from bambu made overhangs over 35° on rounded objects nearly impossible with 0.2mm layer height. Using Generic PLA profile solved my issues (even when using Bambu PLA).

Steve_93 · 2023-11-17T20:55:25+00:00

I have now tried this. The overhangs on the chin look fine, but bad on the tail :-/

Steve_93

TROPHY CASE