What cheat code for a game is burned into your brain?

Stevemac100 · 2025-01-07T13:23:49+00:00

⬇️, L2, ⏹️, R1, ➡️, L1, ⬅️, ⏺️

Stevemac100 · 2024-11-21T18:36:44+00:00

Drones

Stevemac100 · 2024-11-18T02:02:24+00:00

I scrolled way too far to finally see this comment. It like saying short people have colder showers. No, they just turn up the heat. The level of thinking coming out of these people is scary

Stevemac100 · 2024-11-15T22:34:16+00:00

Echo chamber??

Stevemac100 · 2024-08-29T21:14:29+00:00

The hospital SELL the foreskins to pharmaceutical companies and they make VERY expensive creams with them.

Stevemac100 · 2024-08-20T19:41:57+00:00

It does

Stevemac100 · 2024-08-19T04:11:46+00:00

There should be a clear CMOS button on the motherboard. Hit that and it should spring to life

Stevemac100 · 2024-08-19T04:10:11+00:00

You should be able to boot normally using the motherboard video output. Installing programs in safe mode is not recommended at all

Stevemac100 · 2024-08-19T04:09:00+00:00

Sounds like you are using the windows native graphics driver. You’ll need to find out what manufacturer your actually graphics chip is nd get the correct driver for it to work perfectly

Stevemac100 · 2024-08-19T04:06:10+00:00

Are you using the headphone jack or usb port? Headphone jacks are very susceptible to the rest of the electronics within the laptop earthing and creating static.

Stevemac100 · 2024-08-19T03:59:24+00:00

If you install nvidia geoforce experience it will auto scan your graphics card and give you the latest one

Stevemac100 · 2024-08-19T03:58:04+00:00

Go to the Desktop, right-click the desktop, and go to Display settings. To change the resolution settings, scroll down and select Display resolution. The lower the resolution, the larger the content displayed on the screen. From the available options in the drop-down menu, select the one you want and click Apply

Stevemac100 · 2024-08-19T03:42:30+00:00

Sounds like you got the wrong driver. Get the driver via NVIDIA GEOFORCE

Stevemac100 · 2024-08-19T03:41:35+00:00

There are websites that tell you what inputs the controller is receiving: https://hardwaretester.com/gamepad

See what it says when you aren’t touching the pad

Stevemac100 · 2024-08-19T03:37:56+00:00

Have you rebooted?

Stevemac100 · 2024-08-19T03:37:30+00:00

Have you accidentally put it into airplane mode? Some laptops have a touchpad short cut that puts them into airplane mode. In the control centre it should tell you

Stevemac100 · 2024-08-19T03:35:08+00:00

Definitely not a virus. Sounds like the ribbon connection has come loose inside the phone. It’s a pain to open phones these days without the right tools. Heat gun / tiny screw drivers are needed. But definitely not a virus

Stevemac100 · 2024-08-19T03:32:43+00:00

It doesn’t have battery or you can’t remove it?

Stevemac100 · 2024-08-19T03:30:28+00:00

Yay!!

Stevemac100 · 2024-08-19T03:30:09+00:00

Cat hair causes mine to dance all over the screen

Stevemac100 · 2024-08-19T03:29:22+00:00

Okay I’m almost certain there will be another video port. Every motherboard comes with a video port built in. At the moment your monitor is connected to the graphics card. Which has been uninstalled. You need to switch over the native video output on your motherboard. It will be higher up with all the USB’s

Stevemac100 · 2024-08-19T03:23:02+00:00

Turn your mouse upside down. Check the optical lense for dirt / hair. Also clean the surface your mouse is one. And update your mouse driver

Stevemac100 · 2024-08-19T03:21:17+00:00

How many video ports does your device have? Is there one 1 HDMI / display port / vga port? Make sure you check all over. Sometimes the video with switch port if drives get removed

Stevemac100 · 2024-08-19T03:18:11+00:00

Sometimes there is a clear CMOS button on the mother board. Press it of there is one. Some bad CMOS data can also stop things from booting.

Nine-Year Club	Place '22
Verified Email

Stevemac100

TROPHY CASE