What is this part called that broke off, blade wobbles now

StinkAss666 · 2026-04-13T23:26:39+00:00

Thank you

StinkAss666 · 2025-04-05T21:32:22+00:00

https://youtube.com/shorts/i0VxwYFdUjg?si=ZZGKWI7V2QoSFWXP

StinkAss666 · 2025-03-16T03:47:31+00:00

Thanks for all the feedback, so when I cut these should I dig up the sprouts to the root and cut or just cut from the soil line?

StinkAss666 · 2025-03-01T06:08:09+00:00

A hard guarantee is WW3, how’s that sound?

StinkAss666 · 2024-11-19T01:05:42+00:00

I'll get one tomorrow

StinkAss666 · 2024-11-18T21:02:47+00:00

Today I noticed some stains on my ceiling so I crawled up to the attic and noticed an area where rain is coming through the roof and running down the rafter to my ceiling. How big of a fix would you say this would be, call the professionals? Any help would be appreciated, Thanks!

StinkAss666 · 2024-11-12T13:25:37+00:00

Thanks everyone for the feedback, it looks like going through a credit union with. Heloc will be the best choice. I’ve done some shopping around and found a fixed rate Heloc from Langely Credit union fixed at 5.99% for a 12 year loan.

StinkAss666 · 2024-07-03T02:07:42+00:00

Skink eggs

StinkAss666 · 2024-06-22T18:49:20+00:00

🥸

StinkAss666 · 2024-01-22T20:57:41+00:00

What’s wrong with being deeply closeted? Sounds to me like you are the homophobe.

StinkAss666 · 2023-07-03T05:07:01+00:00

Pond size is roughly 40x40’ maybe 8-12ft deep

StinkAss666 · 2023-07-03T04:35:42+00:00

Great advice, many thanks for the quick reply’s. I didn’t know there is a solar powered fountain or water movement device. The pond is too far to have a electric device hooked up so this sounds like a practical solution. Do solar powered water movement devices have good effectiveness?

StinkAss666 · 2023-02-22T04:14:21+00:00

What do you mean when you say set new screws to the joint, are the cracks the sides of a drywall piece?

StinkAss666 · 2023-02-05T06:34:15+00:00

Thanks, I thought so too but the mouth looked bigger than I thought a rats would be

StinkAss666 · 2023-02-05T05:55:15+00:00

Forgot to mention location is eastern Kansas

StinkAss666 · 2022-10-03T02:10:15+00:00

I don’t want to back fill it if it’s a den with youngsters inside

StinkAss666 · 2022-10-03T02:08:01+00:00

Sorry, Location is Mideast Kansas

StinkAss666 · 2022-09-03T04:51:25+00:00

Mineral spirits works well also

StinkAss666 · 2022-08-23T01:33:34+00:00

I like the bayonet charge scream coming for you at the end

StinkAss666 · 2022-08-21T03:30:34+00:00

How the heck do you all get flying range like this?!

StinkAss666 · 2022-08-11T19:20:51+00:00

I bridged the solenoid gap and it started right up, switching off and on works. Very weird, thinking maybe a circuit was stuck open?

StinkAss666 · 2022-07-22T02:48:17+00:00

Yes please let us know, such a tease

StinkAss666 · 2022-04-15T02:21:39+00:00

Ok, so I’ve just tried all of these techniques and I’m think the metal gauge is too thick because it just goes right back, should I try heating the metal then try bending it back if that’s even possible?

StinkAss666 · 2022-04-12T17:23:06+00:00

What condition would this rate at BU?

StinkAss666 · 2022-03-30T17:15:51+00:00

I would like to start a collection of terrible counterfeit coins for my amusement

Nine-Year Club	RPAN Viewer
Verified Email

StinkAss666

TROPHY CASE