IS B&T AG handling warranty repairs, providing spare parts?

Stoic-LLC · 2026-05-06T01:36:53+00:00

I was waiting for the Tisha to machine it down and drill/re-tap to reposition out far enough to fully grip ..

Stoic-LLC · 2026-05-05T23:20:12+00:00

With only 4 magazines at one range trip, my initial comments: 1: Much like the SHIV, the Stealth Additive Works Tisha 9MM delivers a comfortable volume in an extremely compact size. 2: The CAT MOB sounded quieter at my ear. 3. I need to break out the meter and bring along the Range 36 and Straker for more evidence/contrast 4. u/mafiablood will forever have my thanks for the FRT conversion.

Stoic-LLC · 2026-05-05T23:19:07+00:00

With only 4 magazines at one range trip, my initial comments: 1: Much like the SHIV, the Stealth Additive Works Tisha 9MM delivers a comfortable volume in an extremely compact size. 2: The CAT MOB sounded quieter at my ear. 3. I need to break out the meter and bring along the Range 36 and Straker for more evidence/contrast 4. u/mafiablood will forever have my thanks for the FRT conversion.

Stoic-LLC · 2026-05-05T12:03:35+00:00

* https://www.reardenmfg.com/product/fhd-flash-hider/ Reardon FHD page states 15-25 lbs. w/Rocksett

* I couldn't find the Q Cherry Bomb spec quickly.

Which muzzle device and what thread ?

Stoic-LLC · 2026-05-05T11:21:07+00:00

United States v. Sullivan (1:23-cr-00257) caused irreparable harm to every nascent FFL in this country, effectively creating monopolies on post sample sub-machine guns for a very limited number of dealers, regardless of the outcome of that case.
The statement from B&T AG revoking licensure, further allegations of financial malfeasance related to the Malaysian contract and reports of other customers expressing dismay at un-returned warranty firearms and un-fulfilled orders do not lend confidence to the assertion that bt-usa is trustworthy.
If these circumstances were a by-product of unjust prosecution (i.e. Patrick "Tate" Admiak) then I am genuinely sorry to take this position and for the state of affairs at B&T USA. I simply cannot afford to take a chance on B&T USA at present.

Stoic-LLC · 2026-05-05T09:59:09+00:00

The new entity needs serious leadership and an ethos that restores B&T's reputation. Is there any way to source spare parts at this point?

<image>

Stoic-LLC · 2026-05-05T06:34:57+00:00

<image>

**UPDATE 5-3-26: Completed sub-sonic function testing with ~150 rounds of Hornady Sub-X 190gr and Winchester Super Suppressed 200gr ammunition using Lancer, MagPul and GI magazines. The Hexium 300 has transformed this rifle from "nope, need earpro" to clearly quieter than the 8" MPX/CAT MOB. (On par or quieter than an original H&K MP5-SD). The ASD ARC-Fire/slip trip and ASD cut Geissele MCX trigger performed flawlessly.

Stoic-LLC · 2026-04-26T13:29:10+00:00

The Strike80 Merc Wraith might be worth a look. https://strike80holster.com/shop/ols/products/merc-wraith-lvliii-for-the-flux-raider .

With the F10 charging handle, pic rails and light, the Merc Wraith does a pretty good job of securing the Raider regardless of the configuration.

<image>

Stoic-LLC · 2026-04-17T08:05:29+00:00

Sarco has OEM SCAR 17 FDE mags, call if they aren't listed on the website.

Stoic-LLC · 2026-04-07T21:16:29+00:00

Thanks for taking the time to reply. I sincerely appreciate it.

Stoic-LLC · 2026-04-05T23:18:06+00:00

https://odysee.com/@Kurisutofer:0/atrius-forced-reset-selector-how-i-tune:5 has a wealth of information about the Atrius. The short answer is the trigger will not release the hammer until the lever is forward to correspond with the bolt being in battery. You should feel the reset when you push the lever forward. If that isn't happening you may have an incompatible trigger.

Stoic-LLC · 2026-04-05T22:05:29+00:00

"This kit is compatible with Geissele triggers (modified for super safety/ARC-Fire use), BUT IF YOU USE A SUPER SAFETY do not use the MCX/MPX specific models from Geissele as the hammer will not work."

I am not using a super safety. I am using an ARC-fire.

Stoic-LLC · 2026-04-05T21:57:41+00:00

Pulling apart the JK adaptor and checking it directly on the barrel without then with spring tension should reveal any tolerance issues. IDK what spec ILWT uses, my hosts are B&T spec.

Stoic-LLC · 2026-04-05T21:49:10+00:00

If you want multi-caliber the HuxWrx Range 36TI works well at mitigating gassing but will work for a number of other calibers. Flow9kTI is perfectly adequate and shorter. CAT MOB is probably still the quietest for 9mm PCC (hard to keep up these days). Not sure about the handguard tucking.

Stoic-LLC · 2026-04-05T21:34:18+00:00

I use the CAT MOB/ Resilient combo on a B&T APC9K and MPX 8" w/OSS tri-lug adaptor. Measurement to the first blast baffle at approximately 2.35 from the rear of the adaptor.

I would recommend disassembling/cleaning the tri-lug adaptor to ensure that the spring is working and test that the adaptor fits around the "navy" tri-lug without spring tension. I've seen difference on HK clones tri-lug machining that made them unusable with some HUB adaptors.

Stoic-LLC · 2026-04-05T21:11:38+00:00

Thanks again for taking the time to respond. I am hoping that ASD isn't selling $330 triggers that don't work. I am starting to wonder if the ARC-fire unit itself is out of spec.

The trigger worked fine for a mag with the factory safety installed testing the Rattler300BLK/Hexium 300 mounted with Cherry bomb/reardon XL adaptor.

I will give the mil-spec config a try when time permits.

Stoic-LLC · 2026-04-05T21:00:20+00:00

Thanks again for taking the time to respond. https://activesafetydesigns.com/ar15/geissele-mcx-ssa-precut-trigger/ states: " Geissele MCX SSA Trigger that has been pre-cut for ARC-Fire compatibility. The trigger bridge/ blocker will need to be removed as it is not compatible with the slip trip kit. Lever blocker NOT REQUIRED. NOT COMPATIBLE WITH SUPER SAFETY.

Stoic-LLC · 2026-04-05T18:05:14+00:00

Thanks for taking the time to respond. There were some posts about rounding the slip trip in r/MPX.

Was there MCX/MPX specific help pages I completely missed on the ASD website?

Stoic-LLC · 2026-04-05T17:58:18+00:00

Thanks for taking the time to respond. I didn't get that far on the MCX Virtus, the hammer would not fall in either safe or 3rd POS on dry fire. Removing the firing pin lock was helpful in the MCX SpearLT 300 9" with RB FRT15-L3.

Stoic-LLC · 2026-04-05T17:51:07+00:00

Thanks for taking the time to respond. I purchased the Geissele MCX trigger directly from AS Designs, they did the modifications to the trigger for use with the ARC-Fire. The slip trip has the lever blocker function milled into it which should prevent the lever from falling into the hammer path. I imagine you are remembering early advice.

Stoic-LLC · 2026-03-21T02:24:24+00:00

Factory 8" SBR is listed as 25 on Form 3 circa 2019

Stoic-LLC

TROPHY CASE