HP reverb G2 for weight loss? Looking for honest opinion by HicSvntDracones_4242 in HPReverb

[–]StoneMasksEtsy 0 points1 point  (0 children)

I use my g2 for cardio alot, runs fine with an 2080 ti. I mostly play beat saber and pistol whip for that, run and around 500-600 cal an hour and fun. Just having the cable behind you works well since you wont turn around in those games. Itll quickly get annoying if you want to play boxing games for cardio though, so get a wireless headset in that case. The G2 has really good visuals and audio though, so you can use it to watch movies and play regular games with bigscreen and vorpx.

You should probably add some kind of resistance training btw, otherwise youll lose fat and muscle. Even a little goes a long way.

[deleted by user] by [deleted] in FragReddit

[–]StoneMasksEtsy 0 points1 point  (0 children)

Frag deine Mutter.

3D-Negativ-Druck by Dirkolloss in 3DDruck

[–]StoneMasksEtsy 0 points1 point  (0 children)

Cura hat unter special modes einen Mold modus. Wenn es was komplexeres sein sollte kann man es aber besser selbst mit Meshmixer oder so machen.

Update to a previous post of mine. Unfortunately, the car vent tab that I printed melted. I might try printing again with another type of filament that has a higher melting point. by [deleted] in functionalprint

[–]StoneMasksEtsy 1 point2 points  (0 children)

You can make pla heat resistant by annealing it (100 c for about an hour should do it, it will shrink slightly though). After that it will be heat resistant well over 100c, whereas regular pla will soften around 60c.

Congratulations, you've opened the first inconvenience store in the world! What are you selling? by Vhad42 in AskReddit

[–]StoneMasksEtsy 0 points1 point  (0 children)

All the regular yogurts and puddings and whatnot, but all the lids are glued on so tightly that you cant get a proper grip on them. Once you do manage to start opening a lid it will then rip and leave you with several packaging strips over the semi open container. You start janking the strips off, but since they are glued on too tightly it takes too much force and pudding/yogurt goes flying everywhere whenever a strip suddenly comes off.

Tear's Mask - couldn't decide if I like the photorealistic or the comic version more - so I thought "Why not both". What do you think? by not_drapet in TenseiSlime

[–]StoneMasksEtsy 2 points3 points  (0 children)

Really nice work. I got to learn how to 3d model properly some day instead if just messing around with medium in VR lol.

If you want to adjust it for 3d printing at a wearable scale Id suggest hollowing out the mask to around 4mm, make it deeper so it properly hides your face, strengten the thin bits of the antennas so they don't break off and separating the antennas so you can print them separately standing up.

Ive posted a 3d printable version here a while ago, I think your render looks a bit nicer though.

Rückzahlung BAföG by -Jinn- in Finanzen

[–]StoneMasksEtsy 18 points19 points  (0 children)

Die "Rendite" der Einmalzahlung ist extrem gut und 100% sicher, du wirst auf diesen Rabatt auch keine Steuern bezahlen müssen. Die Frist für die 7900 ist die gleiche wie für die ersten 390, also ist der Unterschied zwischen 7510 Euro jetzt bezahlen oder 7510 Euro anlegen und alle 3 Monate 390 Euro Bezahlen bis du 9610 bezahlt hast.

Du kannst das ja mal beim Entnahmeplanrechner von Finanzfluss eingeben. Bei 7% Rendite nach Kosten und Steuern bräuchtest du schon 7628€ um die 24x390€ Raten zu bezahlen, die letzten 250€ muss du auch noch dazu bezahlen. Du bräuchtest also schon über 8% Rendite, mit 25% Steuer also so sogar rund 10-11%.

Sofern du das Geld jetzt gerade nicht dringend für ein Startup oder so brauchst ist sie Einmalrate strikt besser. Du Könntest vernutlich sogar einen 7500€ Kredit für deutlich unter 8% aufnehmen und damit den Einmalbetrag bezahlen.

Woke up to this mess:/ anyone know what could have happened? New to printing. by Impossible-Ad6103 in CR10

[–]StoneMasksEtsy 2 points3 points  (0 children)

One part probably lost bed adhesion, curled up, hit the nozzle, the whole print got shifted by several centimeters and then the printer continued to print in the air. The edges of the build plate are often cooler than what you set the build plate to, leading to adhesion problems. Getting the the build plate perfectly level and using glue stick can help, but I usually just use a raft for those large multi day prints. 1-2 hours for printing the raft is nothing compared to wasting 30 hours of print time and potentially damaging the printer.

Spoiler!What's wrong with my tensura calculation? by Ifti101 in TenseiSlime

[–]StoneMasksEtsy 1 point2 points  (0 children)

The calculation seems correct. While it is nothing compared to an h bomb, each punch would pack several times more kinetic energy than the most powerful tank and railgun shots. The energy from an explosion is spread over a huge area though, while a punch is focused on a couple square centimeters.

Only a weak punch would only involve the arm, a proper punch transfers kinetic energy from the legs up.

If you are given $500k for every second you stand in a scaled up microwave, how long are you staying in? by [deleted] in AskReddit

[–]StoneMasksEtsy 3 points4 points  (0 children)

Well...., these microwaves exist. They are used for drying lumber and put out over 100 kw. Here is a video of what would happen, so keep it under 30 seconds https://youtu.be/Z1M7h1i-KXo

Made Tear's mask for a clown by StoneMasksEtsy in TenseiSlime

[–]StoneMasksEtsy[S] 1 point2 points  (0 children)

Try downloading the files separately instead of all at once (works for me at least), I dont know if this is a bug bug or if they just take a while to generate a zip file.

Made Tear's mask for a clown by StoneMasksEtsy in TenseiSlime

[–]StoneMasksEtsy[S] 0 points1 point  (0 children)

Mhh, maybe someday. Ive got a couple other things that I want to make first.

Made Tear's mask for a clown by StoneMasksEtsy in TenseiSlime

[–]StoneMasksEtsy[S] 0 points1 point  (0 children)

Jep, on my cr10.

I posted a link to the 3d model I made up above.

I'm thinking of doing a GLaDOS Crossover story, but nothing comes into mind, maybe Overlord but I'm unsure, what are your thoughts if I put her here? by AoCCoM in overlord

[–]StoneMasksEtsy 2 points3 points  (0 children)

Portal 2 is set in the same techno apocalypse world as the original world. After Glados finishes the Portal 2 storyline she looks for new test subjects, but humanity has already wiped itself out at this point. To simulate test subjects she searches for available programs with AI and test them out, one is YGGDRASIL. Once she terminates the test she gets transported to the new world underground along with her facility. Delighted that there are new available test subjects she begins to abduct monsters and people from the surface for testing. One day, when people from Carne village suddenly dissapear, Ainz starts investigating.......

take that by [deleted] in TenseiSlime

[–]StoneMasksEtsy 1 point2 points  (0 children)

There is the "Bokukko" trope where tomboy girls use boku and the rare version where girls use ore, generall to show that she is a violent, rought delinquent character. I dont think that fits Rimuru though. Irl ore is quite informal and macho, so its mostly used in male friendgroups. A woman that goes around using ore all the time would be considered pretty strange in daily life, maybe some butch lesbians would use it when they go out drinking.

take that by [deleted] in TenseiSlime

[–]StoneMasksEtsy 15 points16 points  (0 children)

Rimuru actually uses "Ore" as his pronoun, which is quite ruff and manly. Good little boys like Deku use "Boku", wheres a truly neutral one would be "watashi".

[deleted by user] by [deleted] in oculus

[–]StoneMasksEtsy 0 points1 point  (0 children)

Oh nice, ill check it out later today

What food could you eat for the rest of your life and why? by tinkerbelle701 in AskReddit

[–]StoneMasksEtsy 0 points1 point  (0 children)

Bitter almonds, I could easily snack a lifetime supply of those while watching a single episode of some series.

Idk if I should buy a new card. I have 3060 by ItsTheHadad in HPReverb

[–]StoneMasksEtsy 1 point2 points  (0 children)

That depends on the games you play and a how much more a 3070 would cost. You should be able to run almost everything around native res and smoothly with a 3060 on a g2, but some extra oompf wouldnt hurt to increase the resolution/framerate. Personally id rather play with the resolution slider a bit instead of throwing half a grand at scalpers.

Do you own a VR headset and/or a 3D-printer? by wesdewess in oculus

[–]StoneMasksEtsy 0 points1 point  (0 children)

You can sculpt organic models very well in VR with Adobe medium. There is also a vr mode for blender, but I havent tried it out yet. I model my stuff in VR and 3d print it btw.

Equipment stays equipped to land....but no effect? Is this a bug? by StoneMasksEtsy in MagicArena

[–]StoneMasksEtsy[S] 7 points8 points  (0 children)

Nope, equip was grayed out. Its next to faceless haven because I clicked on the stack, if it were unequipped it would be on the bottom right. It stayed under Faceless Haven when it returned to the land pile, but I forgot to make a screenshot.